Wall-climbing performance of gecko-inspired robot with soft feet and digits enhanced by gravity compensation
Source abstract
Abstract
Abstract Gravitational forces can induce deviations in body posture from desired configurations in multi-legged arboreal robot locomotion with low leg stiffness, affecting the contact angle between the swing leg’s end-effector and the climbing surface during the gait cycle. The relationship between desired and actual foot positions is investigated here in a leg-stiffness-enhanced model under external forces, focusing on the challenge of unreliable end-effector attachment on climbing surfaces in such robots. Inspired by the difference in ceiling attachment postures of dead and living geckos, feedforward compensation of the stance phase legs is the key to solving this problem. A feedforward gravity compensation (FGC) strategy, complemented by leg coordination, is proposed to correct gravity-influenced body posture and improve adhesion stability by reducing body inclination. The efficacy of this strategy is validated using a quadrupedal climbing robot, EF-I, as the experimental platform. Experimental validation on an inverted surface (ceiling walking) highlights the benefits of the FGC strategy, demonstrating its role in enhancing stability and ensuring reliable end-effector attachment without external assistance. In the experiment, robots without FGC only completed 3 out of 10 trials, while robots with FGC achieved a 100% success rate in the same trials. The speed was substantially greater with FGC, achieving 9.2 mm s−1 in the trot gait. This underscores the proposed potential of the FGC strategy in overcoming the challenges associated with inconsistent end-effector attachment in robots with low leg stiffness, thereby facilitating stable locomotion even at an inverted body attitude.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Robotic Locomotion and Control · Soft Robotics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Modelling, simulation and experimental validation of wheel and arm locomotion based wall-climbing robot10.1017/S026357472200025X ↗
2. Identification of elasto-static parameters of an industrial robot using monocular camera10.1016/j.rcim.2021.102276 ↗
3. Inverted and inclined climbing using capillary adhesion in a quadrupedal insect-scale robot10.1109/LRA.2020.3003870 ↗
4. A kinematic notation for lower-pair mechanisms based on matrices10.1115/1.4011045 ↗
5. High-slope terrain locomotion for torque-controlled quadruped robots10.1007/s10514-016-9573-1 ↗
6. Biomimetic mushroom-shaped fibrillar adhesive microstructure10.1098/rsif.2006.0164 ↗
7. A modular biped wall-climbing robot with high mobility and manipulating function10.1109/TMECH.2012.2213303 ↗
8. Scaling walls: applying dry adhesives to the real world
9. Software techniques for two- and three-dimensional kinematic measurements of biological and biomimetic systems10.1088/1748-3182/3/3/034001 ↗
10. Agile and versatile climbing on ferromagnetic surfaces with a quadrupedal robot10.1126/scirobotics.add1017 ↗
11. Design and preliminary evaluation of two tool support arm exoskeletons with gravity compensation10.1016/j.mechmachtheory.2022.104802 ↗
12. Righting and turning in mid-air using appendage inertia: reptile tails, analytical models and bio-inspired robots10.1088/1748-3182/5/4/045001 ↗
13. Highly dynamic quadruped locomotion via whole-body impulse control and model predictive control
14. Spinybotii: climbing hard walls with compliant microspines
15. Stiffness modeling for perfect and non-perfect parallel manipulators under internal and external loadings10.1016/j.mechmachtheory.2014.04.002 ↗
16. Identification of the manipulator stiffness model parameters in industrial environment10.1016/j.mechmachtheory.2015.03.002 ↗
17. Wall and ceiling climbing quadruped robot with superior water repellency manufactured using 3D printing (uniclimb)10.1007/s40684-017-0033-y ↗
18. Compliance error compensation of a robot end-effector with joint stiffness uncertainties for milling: an analytical model10.1016/j.mechmachtheory.2021.104717 ↗
19. Lemur 3: a limbed climbing robot for extreme terrain mobility in space
20. Enhanced stiffness modeling of manipulators with passive joints10.1016/j.mechmachtheory.2010.12.008 ↗
21. Spherical magnetic joint for inverted locomotion of multi-legged robot
22. A protocol and calibration method for accurate multi-camera field videography10.1242/jeb.100529 ↗
23. Adhesion and friction in gecko toe attachment and detachment10.1073/pnas.0608841103 ↗
24. A neural coordination strategy for attachment and detachment of a climbing robot inspired by gecko locomotion10.34133/cbsystems.0008 ↗
25. Highly adaptive triboelectric tactile sensor on the foot of autonomous wall-climbing robots for detecting the adhesion state and avoiding the hazard10.1007/s12274-024-6537-1 ↗
26. Morphology and reaction force of toes of geckos freely moving on ceilings and walls10.1007/s11431-010-3188-0 ↗
27. A controllably adhesive climbing robot using magnetorheological fluid
28. Mst-q: Micro suction tape quadruped robot with high payload capacity10.1109/LRA.2023.3316092 ↗
29. New adaptive control methods for n-link robot manipulators with online gravity compensation: design and experiments10.1109/TIE.2021.3050371 ↗