Role of viscoelasticity in the adhesion of mushroom-shaped pillars
Source abstract
Abstract
Abstract The contact behaviour of mushroom-shaped pillars has been extensively studied for their superior adhesive properties, often inspired by natural attachment systems observed in insects. Typically, pillars are modeled with linear elastic materials in the literature; in reality, the soft materials used for their fabrication exhibit a rate-dependent constitutive behaviour. Additionally, conventional models focus solely on the detachment phase of the pillar, overlooking the analysis of the attachment phase. As a result, they are unable to estimate the energy loss during a complete loading-unloading cycle. This study investigates the role of viscoelasticity in the adhesion between a mushroom-shaped pillar and a rigid flat countersurface. Interactions at the interface are assumed to be governed by van der Waals forces, and the material is modeled using a standard linear solid model. Normal push and release contact cycles are simulated at different approaching and retracting speeds. Results reveal that, in the presence of an interfacial defect, a monotonically increasing trend in the pull-off force with pulling speed is observed. The corresponding change in the contact pressure distribution suggests a transition from short-range to long-range adhesion, corroborating recent experimental and theoretical investigations. Moreover, the pull-off force remains invariant to the loading history due to our assumption of a flat–flat contact interface. Conversely, in the absence of defects and under the parameters used in this study, detachment occurs after reaching the theoretical contact strength, and the corresponding pull-off force is found to be rate independent. Notably, the hysteretic loss exhibits a peak at intermediate detachment speeds, where viscous dissipation occurs, which holds true in both the presence and absence of a defect. However, the presence of a defect shifts the region where the majority of viscous dissipation takes place.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Advanced machining processes and optimization · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Biomimetic mushroom-shaped fibrillar adhesive microstructure10.1098/rsif.2006.0164 ↗
2. Scalable and continuous fabrication of bio-inspired dry adhesives with a thermosetting polymer10.1039/C7SM02354E ↗
3. Engineering micropatterned dry adhesives: from contact theory to handling applications10.1002/adfm.201800865 ↗
4. Fabrication of well-defined mushroom-shaped structures for biomimetic dry adhesive by conventional photolithography and molding10.1021/am4052393 ↗
5. Bio-inspired design of hierarchical pdms microstructures with tunable adhesive superhydrophobicity10.1039/C5NR00356C ↗
6. Beetle adhesive hairs differ in stiffness and stickiness: in vivo adhesion measurements on individual setae10.1007/s00114-011-0781-4 ↗
7. Origin of the superior adhesive performance of mushroom-shaped microstructured surfaces10.1039/c0sm01482f ↗
8. Adhesion: role of bulk viscoelasticity and surface roughness10.1088/0953-8984/25/22/225004 ↗
9. Adhesion of compliant spheres: an experimental investigation10.1016/j.prostr.2020.02.022 ↗
10. Rate-dependent adhesion of viscoelastic contacts, part I: contact area and contact line velocity within model randomly rough surfaces10.1016/j.mechmat.2021.103926 ↗
11. Pull-off dynamics of mushroom-shaped adhesive structures10.1016/j.jmps.2023.105519 ↗
12. A viscoelastic model for the rate effect in transfer printing10.1115/1.4007851 ↗
13. Pull-off force modeling and experimental study of PDMS stamp considering preload in micro transfer printing10.1016/j.ijsolstr.2020.02.011 ↗
14. On the retraction of an adhesive cylindrical indenter from a viscoelastic substrate10.1016/j.triboint.2021.107234 ↗
15. Crack and pull-off dynamics of adhesive, viscoelastic solids10.1209/0295-5075/ac535c ↗
16. Revealing the coaction of viscous and multistability hysteresis in an adhesive, nominally flat punch: a combined numerical and experimental study10.1016/j.jmps.2023.105260 ↗
17. Unraveling adhesion mechanisms: exploring the impact of thickness on viscoelastic layers and wavy profiles10.1007/s11249-023-01807-3 ↗
18. Designing an adhesive pillar shape with deep learning-based optimization10.1021/acsami.0c04123 ↗
19. A review of adhesion mechanisms of mushroom-shaped microstructured adhesives10.1007/s11012-013-9724-9 ↗
20. The optimal shape of elastomer mushroom-like fibers for high and robust adhesion10.3762/bjnano.5.74 ↗
21. Single macroscopic pillars as model system for bioinspired adhesives: influence of tip dimension, aspect ratio and tilt angle10.1021/am405873j ↗
22. Buckling of an adhesive polymeric micropillar10.1080/00218464.2013.731941 ↗
23. In-plane combination of micropillars with distinct aspect ratios to resist overload-induced adhesion failure10.1002/advs.202400972 ↗
24. Effect of viscoelasticity on adhesion of bioinspired micropatterned epoxy surfaces10.1021/la2009336 ↗
25. Effect of rate on adhesion and static friction of a film-terminated fibrillar interface10.1021/la8033885 ↗
26. A design strategy for mushroom-shaped microfibrils with optimized dry adhesion: experiments and finite element analyses10.1115/1.4049183 ↗
27. Sticky bio-inspired micropillars: finding the best shape10.1002/smll.201102021 ↗
28. Rate-dependent adhesion of viscoelastic contacts. Part II: numerical model and hysteresis dissipation10.1016/j.mechmat.2021.103884 ↗
29. The mechanics of adhesion of viscoelastic solids10.1080/01418618108240402 ↗
30. On the effective surface energy in viscoelastic hertzian contacts10.1016/j.jmps.2021.104669 ↗
31. Effect of wetting liquids on the strength of adhesion of viscoelastic material10.1080/00218467208072199 ↗
32. Rate-dependent adhesion in dynamic contact of spherical-tip fibrillar structures10.1016/j.ijsolstr.2022.111997 ↗
33. Adhesive contact mechanics of bio-inspired pillars: exploring hysteresis and detachment modes10.1016/j.ijadhadh.2024.103768 ↗
34. Size effects in adhesive contacts of viscoelastic media10.1016/j.euromechsol.2022.104665 ↗
35. Exploring the dynamics of viscoelastic adhesion in rough line contacts10.1038/s41598-023-39932-7 ↗
36. Adhesion of a cylindrical punch with elastic properties that vary radially10.1016/j.mechrescom.2023.104123 ↗
37. The effect of aspect ratio on adhesion and stiffness for soft elastic fibres10.1098/rsif.2010.0582 ↗
38. Contact shape controls adhesion of bioinspired fibrillar surfaces10.1021/la7010502 ↗
39. Very high-aspect-ratio polymeric micropillars made by two-photon polymerization10.3390/mi14081602 ↗
40. Insect adhesion on rough surfaces: analysis of adhesive contact of smooth and hairy pads on transparent microstructured substrates10.1098/rsif.2014.0499 ↗
41. Roughness-induced adhesive hysteresis in self-affine fractal surfaces10.3390/lubricants9010007 ↗
42. Modeling adhesive hysteresis10.3390/lubricants9020017 ↗
43. On the long and short-range adhesive interactions in viscoelastic contacts10.1007/s11249-022-01611-5 ↗
44. Adhesion of spheres: the jkr-dmt transition using a dugdale model10.1016/0021-9797(92)90285-T ↗
45. Transfer printing by kinetic control of adhesion to an elastomeric stamp10.1038/nmat1532 ↗
46. Detachment of a rigid flat punch from a viscoelastic material10.1007/s11249-023-01720-9 ↗
47. Crack propagation in viscoelastic solids10.1103/PhysRevE.71.036123 ↗
48. The theory of viscoelastic crack propagation and healing10.1088/0022-3727/37/18/011 ↗