Biomimetic bi-material designs for additive manufacturing
Source abstract
Abstract
Abstract Superior material properties have been recently exhibited under the concept of biomimetic designs, where the material architectures are inspired by nature. In this study, a computational framework is developed to present novel architectured bi-material structures with tunable stiffness, strength, and toughness to be used for additive manufacturing (AM). The structure of natural nacre is mimicked to design robust multilayered structures constructed from hexagonal brittle and hard building blocks bonded with soft materials and supports. A set of computational models consisting of fully bonded zones, while allowing for interlayer interactions are created to accurately mimic the interplay between the hard and soft organic phases. As required for such complex designs, the numerical constraints are properly set to run quasi-static non-linear explicit analysis, which allow for a 3× faster analysis with higher efficiency and 2× lower computational cost, when compared to static analysis. The models are used to assess the stiffness, strength and toughness of bi-material beams when subjected to a flexural three-point bending load. The influence of structural features like the soft-to-hard volume ratio (i.e. the distance between each building block, its aspect ratio, and overlap length), material features (e.g. the stiffness ratio of the hard-to-soft phases), the plastic strain failure of soft phase, and AM features (e.g. different types of within-layer/sandwiched supports) are systematically investigated. The results revealed that the toughness of the architectured beams was enhanced by up to 25% when compared to a monolithic structure. This improvement is due to the frictional tile sliding in the brittle phase and the extensive shear plastic deformation of the soft interfaces. This work provides compatible designs to facilitate the AM of nacre-based bi-martial structures with balanced/tailored mechanical performance and to understand the influence of the architectural parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Bioinspired structural materials10.1038/nmat4089 ↗
2. Architectured materials in engineering and biology: fabrication, structure, mechanics and performance10.1179/1743280415y.0000000008 ↗
3. Materials science and architecture10.1038/natrevmats.2017.82 ↗
4. Engineered bi-material lattices with thermo-mechanical programmability10.1016/j.compstruct.2021.113705 ↗
5. Bioinspired stochastic design: tough and stiff ceramic systems10.1002/adfm.202108492 ↗
6. Multilayered architectured ceramic panels with weak interfaces: energy absorption and multi-hit capabilities10.1016/j.matdes.2019.107627 ↗
7. Engineering toughening mechanisms in architectured ceramic-based bioinspired materials10.1016/j.matdes.2020.109375 ↗
8. Architectured ceramics with tunable toughness and stiffness10.1016/j.eml.2020.100844 ↗
9. Accelerated design of architectured ceramics with tunable thermal resistance via a hybrid machine learning and finite element approach10.1016/j.matdes.2021.110056 ↗
10. New toughening concepts for ceramic composites from rigid natural materials10.1016/j.jmbbm.2010.08.001 ↗
11. 25th anniversary article: artificial carbonate nanocrystals and layered structural nanocomposites inspired by nacre: synthesis, fabrication and applications10.1002/adma.201303470 ↗
12. Nacre-inspired nanocomposites produced using layer-by-layer assembly: design strategies and biomedical applications10.1016/j.msec.2017.02.043 ↗
13. Strong, tough and stiff bioinspired ceramics from brittle constituents10.1038/nmat3915 ↗
14. Tough, bio-inspired hybrid materials10.1126/science.1164865 ↗
15. Heterogeneous and architectured materials: a possible strategy for design of structural materials10.1002/adem.200700289 ↗
16. Deformation mechanisms in nacre10.1557/jmr.2001.0340 ↗
17. Biomimetic architected materials with improved dynamic performance10.1016/j.jmps.2018.12.015 ↗
18. Distinct failure modes in bio-inspired 3D-printed staggered composites under non-aligned loadings10.1088/1361-665x/aa59eb ↗
19. Mechanical properties of topologically interlocked structures with elements produced by freeze gelation of ceramic slurries10.1002/adem.201100244 ↗
20. Design and manufacturing of aerospace composite structures, state-of-the-art assessment10.2514/2.2992 ↗
21. Additive manufacturing of multi-material structures10.1016/j.mser.2018.04.001 ↗
22. Deep and high precision cutting of alumina ceramics by picosecond laser10.1016/j.ceramint.2020.03.069 ↗
23. Engineered net shaping of alumina ceramics using picosecond laser10.1016/j.optlastec.2020.106669 ↗
24. A comparative study of nano-fillers to improve toughness and modulus of polymer-derived ceramics10.1038/s41598-021-82365-3 ↗
25. 3D printing of ceramics: a review10.1016/j.jeurceramsoc.2018.11.013 ↗
26. Support structures for additive manufacturing: a review10.3390/jmmp2040064 ↗
27. Recent developments in finite element analysis for laminated composite plates10.1016/j.compstruct.2008.02.014 ↗
28. Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings10.1016/j.compositesb.2016.09.083 ↗
29. Bending behaviors of 3D-printed bi-material structure: experimental study and finite element analysis10.1016/j.addma.2017.06.005 ↗