journal article·2024-07-01Open access

Porous structures inspired by porcupine quill: multiscale design optimization approach

Tian Lan, Kate Fox, Phuong Tran

Bioinspiration & Biomimetics· Volume 19· Issue 4

Abstract

Abstract This paper presents a novel approach for designing a freeform bending-resistant structure from the combination of explicit discrete component-based topology optimization (TO) and the porcupine quill-inspired features. To embed the porcupine quill’s features into the TO formulations, the method involves constructing discrete components at various scales to imitate features including solid shell, stochastically distributed pores, and graded stiffeners. The components are iteratively updated, and the optimization process allows for the grading of quill-inspired features while achieving optimal structural compliance under bending loads. The proposed approach is demonstrated to be effective through the resolution of Messershmitt–Bolkow–Blohm (MBB) beam designs, parameterized studies of geometric parameters, and numerical validation of long-span and short-span quill-inspired beam designs. By examining the von Mises stress distribution, the study highlights the mitigation of material yielding at the shell region brought by the geometric features of porcupine quills, leading to the potential theory support for the bending resistance. The optimized MBB beams are manufactured using the material extrusion technique, and three-point bending tests are conducted to explore the failure mitigation capability of the quill-inspired beam under large deformation. Consequently, the study concludes that the proposed quill-inspired component-based TO approach can design a structure with excellent bending resistance according to the improved energy absorption as well as increased deformation after reaching 75% peak load.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Topology Optimization in Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Topology optimized design and validation of sandwich structures with pure-lattice/solid-lattice infill by additive manufacturing10.1016/j.compstruct.2023.117152 ↗
2. 3D printed sandwich beams with bioinspired cores: mechanical performance and modelling10.1016/j.tws.2021.107471 ↗
3. 3D topology optimization of sandwich structures with anisotropic shells10.1016/j.compstruct.2022.115237 ↗
4. Toughness-improving design of lattice sandwich structures10.1016/j.matdes.2023.111600 ↗
5. The influence of stiffener geometry on flexural properties of 3D printed polylactic acid (PLA) beams10.1007/s40964-020-00146-2 ↗
6. Effective elastic properties of sandwich-structured hierarchical honeycombs: an analytical solution10.1016/j.ijmecsci.2023.108883 ↗
7. Theoretical and numerical analysis on elastic-plastic bending responses of honeycomb beams10.1016/j.compstruct.2024.117948 ↗
8. Bio-based sandwich beams made of paper honeycomb cores and flax FRP facings: flexural and shear characteristics10.1016/j.istruc.2023.05.064 ↗
9. Energy absorption characteristics of three-layered sandwich panels with graded re-entrant hierarchical honeycombs cores10.1016/j.ast.2020.106073 ↗
10. In-plane crashworthiness of re-entrant hierarchical honeycombs with negative Poisson’s ratio10.1016/j.compstruct.2019.111415 ↗
11. Study on three-point bending behavior of sandwich beams with novel auxetic honeycomb core10.1016/j.mtcomm.2023.106259 ↗
12. Research on three-point bending performance of hollow-core rod pyramidal gradient lattice sandwich beam10.1016/j.istruc.2023.105165 ↗
13. Equivalent models and mechanical properties of bio-inspired corrugated sandwich structures subjected to bending loads10.1016/j.compstruct.2020.112257 ↗
14. Optimization of a lattice structure inspired by glass sponge10.1088/1748-3190/ac9fb2 ↗
15. Biomimetics design of sandwich-structured composites10.3390/jcs7080315 ↗
16. Separating the influence of the cortex and foam on the mechanical properties of porcupine quills10.1016/j.actbio.2013.07.004 ↗
17. Flexural properties of porcupine quill-inspired sandwich panels10.1088/1748-3190/acd096 ↗
18. Axial compression of a hollow cylinder filled with foam: a study of porcupine quills10.1016/j.actbio.2012.09.004 ↗
19. Tensile deformation and failure of North American porcupine quills10.1016/j.msec.2011.08.002 ↗
20. Failure analysis of porcupine quills under axial compression reveals their mechanical response during buckling10.1016/j.jmbbm.2014.07.017 ↗
21. Virtual characterisation of porcupine quills using x-ray micro-CT10.1080/17452759.2022.2126377 ↗
22. From nature to additive manufacturing: biomimicry of porcupine quill10.1016/j.matdes.2021.110041 ↗
23. Doing topology optimization explicitly and geometrically—a new moving morphable components based framework10.1115/1.4027609 ↗
24. Explicit structural topology optimization based on moving morphable components (MMC) with curved skeletons10.1016/j.cma.2016.07.018 ↗
25. Structural topology optimization through explicit boundary evolution10.1115/1.4034972 ↗
26. Explicit structural topology optimization using moving wide Bezier components with constrained ends10.1007/s00158-021-02853-y ↗
27. An enhanced topology optimization approach based on the combined MMC and NURBS-curve boundaries10.1007/s12541-020-00353-5 ↗
28. Adaptive concurrent topology optimization of coated structures with nonperiodic infill for additive manufacturing10.1016/j.cad.2020.102918 ↗
29. Adaptive concurrent topology optimization of cellular composites for additive manufacturing10.1007/s11837-020-04158-9 ↗
30. Concurrent multiscale topology optimisation towards design and additive manufacturing of bio-mimicking porous structures10.1080/17452759.2022.2150867 ↗
31. Multiscale topology optimization for coated structures with multifarious-microstructural infill10.1007/s00158-019-02428-y ↗
32. Multiscale topological design of coated structures with layer-wise bi-material lattice infill for minimum dynamic compliance10.1016/j.compstruct.2023.117468 ↗
33. Multi-material topology optimization of coated structures using level set method10.1016/j.compstruct.2022.116074 ↗
34. Hollow structural topology optimization to improve manufacturability using three-dimensional moving morphable bars10.1016/j.advengsoft.2020.102955 ↗
35. Hollow structural design in topology optimization via moving morphable component method10.1007/s00158-019-02353-0 ↗
36. Hollow structural topology optimization considering geometrical nonlinearity using three-dimensional moving morphable bars10.1007/s00366-022-01701-x ↗
37. Multiscale topology optimization of lattice structure using 3D moving hollow morphable bars10.1007/s11837-021-04917-2 ↗
38. Bioinspired 3D printing-unravel the secret behind porcupine quill structure10.3316/informit.321599416352850 ↗
39. Efficient topology optimization in MATLAB using 88 lines of code10.1007/s00158-010-0594-7 ↗
40. Concurrent shape and build orientation optimization for FDM additive manufacturing using the principal stress lines (PSL)10.1016/j.heliyon.2023.e15022 ↗
41. Topology optimization of microlattice dome with enhanced stiffness and energy absorption for additive manufacturing10.1016/j.compstruct.2020.112889 ↗