journal article·2025-07-31

Control of turbulent boundary layer separation by a 3D printed shark skin model with passive bristling

A Bonacci, K Wong, A Lang, L M Santos

Bioinspiration & Biomimetics· Volume 20· Issue 4
Publisher page

Abstract

Abstract Turbulent boundary layer separation can be problematic in many engineering applications. However, nature may have a solution in the form of flexible shark scales found on the shortfin mako, which have been proven to passively bristle under reversing flow conditions and control flow separation. An investigation of how these shark scales interact with reversing flow in the near-wall regions of the boundary layer is of interest to better understand the fluid-shark scale interactions. Enlarging the geometry and constructing 3D printed models of shark skin is the best route forward to developing a bioinspired surface for aircraft applications. Using a rotating cylinder above a flat plate in a water tunnel setup, an adverse pressure gradient was induced, creating a separated region over a tripped turbulent boundary layer. Movable and rigid 3D printed shark scales that replicate passive bristling angles of 50∘ are constructed with crown lengths of 3.6 mm, twenty times greater than those of a real shark. In this experiment, the boundary layer grows to sizes large enough that the scale of the flow increases, making it more measurable to digital particle image velocimetry and allowing models to be sized so that they fit within the bottom 10% of the boundary layer. At low reversing flow velocities, the movable scales were seen to passively flap and mix momentum in the lower boundary layer.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Biomimetic flight and propulsion mechanisms · Fluid Dynamics and Turbulent Flows · Fluid Dynamics and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Scales of thelodont and shark-like fishes from the Ordovician of Colorado10.1038/379628a0 ↗
2. Teeth outside the mouth: the evolution and development of shark denticles10.1111/ede.12427 ↗
3. Structure, biomimetics and fluid dynamics of fish skin surfaces10.1103/PhysRevFluids.1.060502 ↗
4. Shark skin denticles: from morphological diversity to multi-functional adaptations and applications10.1002/adfm.202307121 ↗
5. Experiments with three-dimensional riblets as an idealized model of shark skin10.1007/s003480050400 ↗
6. Experiments on drag-reducing surfaces and their optimization with an adjustable geometry10.1017/S0022112096004673 ↗
7. Fluid mechanics of biological surfaces and their technological application10.1007/s001140050696 ↗
8. Bechert · 1986 · vol 2 · pp 1044
9. Hydrodynamic efficiency in sharks: the combined role of riblets and denticles10.1088/1748-3190/abf3b1 ↗
10. Hydrodynamic function of biomimetic shark skin: effect of denticle pattern and spacing10.1088/1748-3190/10/6/066010 ↗
11. Shark skin-inspired designs that improve aerodynamic performance10.1098/rsif.2017.0828 ↗
12. Relationship between skin scales and the main flow field around the shortfin mako shark Isurus oxyrinchus10.3389/fbioe.2022.742437 ↗
13. Multi-fidelity modelling of shark skin denticle flows: insights into drag generation mechanisms10.1098/rsos.220684 ↗
14. Review—a review of some phenomena in turbulent flow separation10.1115/1.3241761 ↗
15. The structure of a separating turbulent boundary layer. Part 1. Mean flow and Reynolds stresses10.1017/S002211208100339X ↗
16. Turbulent boundary-layer separation10.1146/annurev.fl.21.010189.001225 ↗
17. Bristled shark skin: a microgeometry for boundary layer control?10.1088/1748-3182/3/4/046005 ↗
18. Movable shark scales act as a passive dynamic micro-roughness to control flow separation10.1088/1748-3182/9/3/036017 ↗
19. The speedy secret of shark skin10.1063/PT.3.4460 ↗
20. Scale morphology and flexibility in the shortfin mako Isurus oxyrinchus and the blacktip shark Carcharhinus limbatus10.1002/jmor.20047 ↗
21. Passive bristling of mako shark scales in reversing flows10.1098/rsif.2018.0473 ↗
22. Passive separation control of shortfin mako shark skin in a turbulent boundary layer10.1016/j.expthermflusci.2021.110433 ↗
23. The effect of shortfin mako shark skin at the reattachment of a separated turbulent boundary layer10.1088/1748-3190/ad679c ↗
24. Effects of surface roughness on a separating turbulent boundary layer10.1017/jfm.2018.101 ↗
25. Schlichting · 2016
26. Afroz · 2014
27. Numerical study of adverse pressure gradient generation over a flat plate using a rotating cylinder10.1016/j.jfluidstructs.2016.01.010 ↗
28. Vortex shedding flow behind a slowly rotating circular cylinder10.1016/j.jfluidstructs.2008.04.005 ↗
29. Digital particle image velocimetry10.1007/BF00190388 ↗
30. Estimation of uncertainty bounds for individual particle image velocimetry measurements from cross-correlation peak ratio10.1088/0957-0233/24/6/065301 ↗
31. Anatomy and functional morphology of dermal collagen fibers in sharks10.2307/1443263 ↗
32. Direct measurement of cruising and burst swimming speeds of the shortfin mako shark (Isurus oxyrinchus) with estimates of field metabolic rate10.1111/jfb.15475 ↗
34. On negative turbulence production phenomena in the shear layer of separating and reattaching flows10.1016/j.physleta.2018.12.026 ↗