Design and verification of a parallel elastic robotic leg
Source abstract
Abstract
Abstract This paper presents the design and experimental verification of a parallel elastic robotic leg mechanism that aims to capture the dynamics of the linear mass-spring-damper model. The mechanism utilizes a wrapping cam mechanism to linearize the non-linear force resulting from the elongation of the parallel elastic element. Firstly, we explain the desired dynamics of the mass-spring-damper model, including the impact transitions, and the design of the wrapping cam mechanism. We then introduce a system identification procedure to estimate the parameters of the leg mechanism corresponding to the dynamic model. The estimated parameters are tested with a cross-validation approach to evaluate the mechanism’s performance in tracking the desired model. The experimental results show that the passive dynamics of the mechanism resemble the linear model as intended. Thus, the robot provides a basis for using parallel elastic actuation while using model-based controllers that benefit the analytic solutions of the linear model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Robotic Locomotion and Control · Hydraulic and Pneumatic Systems · Prosthetics and Rehabilitation Robotics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Design principles for highly efficient quadrupeds and implementation on the MIT cheetah robot
2. An open torque-controlled modular robot architecture for legged locomotion research10.1109/LRA.2020.2976639 ↗
3. Mini cheetah: a platform for pushing the limits of dynamic quadruped control
4. ATRIAS: design and validation of a tether-free 3D-capable spring-mass bipedal robot10.1177/0278364916648388 ↗
5. ANYmal—a highly mobile and dynamic quadrupedal robot
6. Schwind · 1998
7. The dynamics of legged locomotion: models, analyses and challenges10.1137/S0036144504445133 ↗
8. Constructing predictive models of human running10.1098/rsif.2014.0899 ↗
9. The spring loaded inverted pendulum as the hybrid zero dynamics of an asymmetric hopper10.1109/TAC.2009.2024565 ↗
10. Control of underactuated planar pronking through an embedded spring-mass hopper template10.1007/s10514-010-9216-x ↗
11. Unified modeling and control of walking and running on the spring-loaded inverted pendulum10.1109/TRO.2016.2593483 ↗
12. Gait based on the spring-loaded inverted pendulum
13. Raibert · 1986
14. Vertical hopper compositions for preflexive and feedback-stabilized quadrupedal bounding, pacing, pronking and trotting10.1177/0278364918779874 ↗
15. Virtual model control of a bipedal walking robot
16. Slip running with an articulated robotic leg
17. Modeling and experiments of untethered quadrupedal running with a bounding gait: the scout II robot10.1177/0278364904050917 ↗
18. Experimental validation of a feed-forward predictor for the spring-loaded inverted pendulum template10.1109/TRO.2014.2383531 ↗
19. Passive-dynamic leg design for agile robots
20. Parallel compliance design for increasing robustness and efficiency in legged locomotion–theoretical background and applications10.1109/TMECH.2020.3019686 ↗
21. Energy-optimal hopping in parallel and series elastic one-dimensional monopeds10.1115/1.4039496 ↗
22. Parallel elastic actuators as a control tool for preplanned trajectories of underactuated mechanical systems10.1177/0278364909344002 ↗
23. A parallel-elastic actuator for a torque-controlled back-support exoskeleton10.1109/LRA.2017.2768120 ↗
24. Hybrid leg compliance enables robots to operate with sensorimotor delays and low control update frequencies
25. SpaceBok: a dynamic legged robot for space exploration
26. A switchable parallel elastic actuator and its application to leg design for running robots10.1109/TMECH.2018.2871670 ↗
27. A reconfigurable leg for walking robots10.1109/LRA.2021.3139379 ↗
28. Design of a parallel elastic hopper with a wrapping cam mechanism and template based virtually tunable damping control
29. Function generation with band mechanisms10.1016/0022-2569(66)90010-3 ↗
30. Design of non-circular pulleys for torque generation: a convex optimisation approach10.1109/LRA.2021.3056358 ↗
31. Matlab version: 9.13.0 (r2022b)