Energy considerations and flow fields over whiffling-inspired wings
Source abstract
Abstract
Abstract Some bird species fly inverted, or whiffle, to lose altitude. Inverted flight twists the primary flight feathers, creating gaps along the wing’s trailing edge and decreasing lift. It is speculated that feather rotation-inspired gaps could be used as control surfaces on uncrewed aerial vehicles (UAVs). When implemented on one semi-span of a UAV wing, the gaps produce roll due to the asymmetric lift distribution. However, the understanding of the fluid mechanics and actuation requirements of this novel gapped wing were rudimentary. Here, we use a commercial computational fluid dynamics solver to model a gapped wing, compare its analytically estimated work requirements to an aileron, and identify the impacts of key aerodynamic mechanisms. An experimental validation shows that the results agree well with previous findings. We also find that the gaps re-energize the boundary layer over the suction side of the trailing edge, delaying stall of the gapped wing. Further, the gaps produce vortices distributed along the wingspan. This vortex behavior creates a beneficial lift distribution that produces comparable roll and less yaw than the aileron. The gap vortices also inform the change in the control surface’s roll effectiveness across angle of attack. Finally, the flow within a gap recirculates and creates negative pressure coefficients on the majority of the gap face. The result is a suction force on the gap face that increases with angle of attack and requires work to hold the gaps open. Overall, the gapped wing requires higher actuation work than the aileron at low rolling moment coefficients. However, above rolling moment coefficients of 0.0182, the gapped wing requires less work and ultimately produces a higher maximum rolling moment coefficient. Despite the variable control effectiveness, the data suggest that the gapped wing could be a useful roll control surface for energy-constrained UAVs at high lift coefficients.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Biomimetic flight and propulsion mechanisms · Aerodynamics and Fluid Dynamics Research · Wind Energy Research and Development
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Protean defence by prey animals10.1007/BF00815496 ↗
2. A goose-watching visit to northern Iceland
3. Inverted flight in Canada geese10.2307/1366095 ↗
4. Canada geese whiffling
5. The flight of birds: II. Wing function in relation to flight speed10.1242/jeb.30.1.90 ↗
6. The role of passive avian head stabilization in flapping flight10.1098/rsif.2015.0508 ↗
7. Empirical power consumption model for UAVs10.1109/VTCFall.2018.8690666 ↗
8. A critical review on unmanned aerial vehicles power supply and energy management: solutions, strategies, and prospects10.1016/j.apenergy.2019.113823 ↗
9. Optimal flight speed of birds10.1098/rstb.1995.0082 ↗
10. A dynamic power consumption estimation method of electro-mechanical actuator for UAV modeling and simulation10.1007/s42405-021-00417-4 ↗
11. Development of a sizing and analysis tool for electrohydrostatic and electromechanical actuators for the more electric aircraft10.2514/6.2013-4282 ↗
12. Avian whiffling-inspired gaps provide an alternative method for roll control10.1088/1748-3190/ac7303 ↗
13. Active control of aircraft using spoilers
14. Wind-tunnel investigation at low speed of the lateral control characteristics of an unswept untapered semi-span wing of aspect ratio 3.13 equipped with various 25-percent-chord plain ailerons
15. Computational validation that whiffling-inspired gaps require less work for roll control than conventional ailerons at high rolling moment coefficients10.1115/SMASIS2022-89275 ↗
16. Turbulence modeling for low-Reynolds-number flows10.2514/1.J050067 ↗
17. XFOIL vs CFD performance predictions for high lift low Reynolds number airfoils10.1016/j.ast.2016.02.031 ↗
18. Barlow · 1999
19. Anderson J D · 2007
20. Sadraey · 2013
21. Summary data from the sixth AIAA CFD drag prediction workshop: CRM cases10.2514/1.C034409 ↗
22. Data summary from second AIAA computational fluid dynamics drag prediction workshop10.2514/1.10771 ↗
23. Overview and summary of the third AIAA high lift prediction workshop10.2514/1.C034940 ↗
24. Wake development of airfoils with serrated trailing edges10.2514/6.2016-2817 ↗
25. Aerodynamic and aeroacoustic performance of serrated airfoils10.2514/6.2015-2201 ↗
26. Measurements of fluctuating wall pressure for separated/reattached boundary layer flows10.1115/1.3269343 ↗
27. Direct numerical simulation of turbulent flow over a backward-facing step10.1017/S0022112096003941 ↗
28. Design and experimental evaluation of a high-lift, mild-stall airfoil
29. Aerodynamic performance analysis of slotted airfoils for application to wind turbine blades10.1016/j.jweia.2016.01.011 ↗
30. Computational investigation of the conformal vortex generator10.2514/6.2019-2138 ↗
31. Vortical structures and wakes of a sphere in homogeneous and density stratified fluid10.1007/s42241-021-0032-x ↗
32. An experimental and numerical investigation of propeller-rudder-hull interaction in the presence of tip vortex cavitation (TVC)10.1016/j.oceaneng.2020.108024 ↗
33. Laminar separation, transition, and turbulent reattachment near the leading edge of airfoils10.2514/3.50815 ↗
34. Aerodynamic and aeroelastic characteristics of wings with conformal control surfaces for morphing aircraft10.2514/2.3062 ↗
35. Distribution of pressure over model of the upper wing and aileron of a Fokker D-VII Airplane
36. Numerical and experimental transition results evaluation for a morphing wing and aileron system10.1017/aer.2018.15 ↗
37. Bioinspired morphing wings for extended flight envelope and roll control of small drones10.1098/rsfs.2016.0092 ↗
38. Sigrest · Figshare · 202310.6084/m9.figshare.c.6284877.v5 ↗