journal article·2026-04-23Open access

Resin models of Drosophila strain sensors highlight mechanical pre-filtering of sensory inputs

Gesa F Dinges, Isabella M Kudyba, Nicholas S Szczecinski

Bioinspiration & Biomimetics· Volume 21· Issue 2

Abstract

Abstract Locomotion can be modified and reinforced through the utilization of sensory feedback. A type of sensory structure, commonly found in the legs of insects, is strain sensors called campaniform sensilla (CS). These are embedded in the rigid cuticle and commonly found in groups and fields, some of which contain a variety of CS sizes and orientations. The CS groups and fields on the legs are consistent across individuals of the same species, but the topography of the local cuticle and the number of sensilla may vary. In order to investigate the effect of these variations on force encoding, we utilize a previously published physical modeling approach to begin to address three questions: (i) how might the cuticular contour (i.e. deviation in elevation from the local cuticle patch) amplify and reorient the strain that CS encode? (ii) How might the absence of some CS impact the strain encoded by the remaining CS in that field? and (iii) How might these two mechanisms impact how a field encodes the direction of loading on a limb? Using 3D printed resin mechanical models of a Drosophila CS field with 11 CS, we measured the displacement at each sensillum’s location via a corresponding strain gauge rosette (i.e. nonparallel strain gauges). We 3D printed additional ‘block’ models that flattened the contour and further “reduced” models that omitted some caps from the field. Comparing the realistic, block, and reduced models revealed that, as predicted, raised cuticular contouring can rotate the directional sensitivity of a single CS. Removing some caps from the field changed the magnitude, but rarely the directional sensitivity, of cap strain. Both contour and cap removal alter the population response to different loading directions. These results suggest that inter-individual differences could greatly impact strain sensing in vivo and provide concrete hypotheses for future biological experiments. We conclude by discussing implications for motor control and robotics, as well as limitations and improvements to our method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Neurobiology and Insect Physiology Research · Biomimetic flight and propulsion mechanisms · Robotic Locomotion and Control

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Mechanosensation and adaptive motor control in insects10.1016/j.cub.2016.06.070 ↗
2. Reflex reversal in the walking systems of mammals and arthropods
3. Motor control on the move: from insights in insects to general mechanisms10.1152/physrev.00009.2024 ↗
4. Sensory pathways and their modulation in the control of locomotion10.1016/S0959-4388(98)80115-3 ↗
5. Signals from load sensors underlie interjoint coordination during stepping movements of the stick insect leg10.1152/jn.01271.2003 ↗
6. The exoskeleton and insect proprioception. I. Responses of tibial campaniform sensilla to external and muscle-generated forces in the American Cockroach, Periplaneta Americana10.1242/jeb.91.1.1 ↗
7. The exoskeleton and insect proprioception: III. Activity of tribal campaniform sensilla during walking in the American Cockroach, Periplaneta Americana10.1242/jeb.94.1.57 ↗
8. Load sensing and control of posture and locomotion10.1016/j.asd.2004.05.005 ↗
9. Activity and directional sensitivity of leg campaniform sensilla in a stick insect10.1007/BF00217109 ↗
10. Anatomy and physiology of trochanteral campaniform sensilla in the stick insect, Cuniculina impigra10.1111/j.1365-3032.1982.tb00317.x ↗
11. An overview of campaniform sensilla arrangement and location on hexapod legs10.1016/j.asd.2025.101477 ↗
12. Force encoding in stick insect legs delineates a reference frame for motor control10.1152/jn.00274.2012 ↗
13. Force sensors in hexapod locomotion10.1177/0278364905055381 ↗
14. Location and arrangement of campaniform sensilla in Drosophila melanogaster10.1002/cne.24987 ↗
15. Projections of leg proprioceptors within the CNS of the fly Phormia in relation to the generalized insect ganglion10.1002/cne.903220103 ↗
16. Localization of choline acetyltransferase-expressing neurons in Drosophila nervous system10.1002/(SICI)1097-0029(19990415)45:2<65::AID-JEMT2>3.0.CO;2-0 ↗
17. Campaniform sensilla of Calliphora vicina (Insecta, Diptera): I10.1007/BF00312005 ↗
18. Proprioception in insects. I. A new type of mechanical receptor from the palps of the cockroach10.1242/jeb.15.1.101 ↗
19. Proprioception in Insects II. The action of the campaniform sensilla on the legs
20. Ultrastructural organization of NompC in the mechanoreceptive organelle of Drosophila campaniform mechanoreceptors10.1073/pnas.1819371116 ↗
21. Directional sensitivity and mechanical coupling dynamics of campaniform sensilla during chordwise deformations of the fly wing10.1242/jeb.169.1.221 ↗
22. Directional specificity and encoding of muscle forces and loads by stick insect tibial campaniform sensilla, including receptors with round cuticular caps10.1016/j.asd.2013.10.001 ↗
23. Location and arrangement of campaniform sensilla in Drosophila melanogaster10.1002/cne.24987 ↗
24. Mechanics to pre-process information for the fine tuning of mechanoreceptors10.1007/s00359-019-01355-z ↗
25. Intraspecific variation in the placement of campaniform sensilla on the wings of the hawkmoth Manduca Sexta10.1093/iob/obae007 ↗
26. Mechanical modeling of mechanosensitive insect strain sensors as a tool to investigate exoskeletal interfaces10.1088/1748-3190/ad1db9 ↗
27. Range fractionation in the locust metathoracic femoral chordotonal organ10.1007/BF00191466 ↗
28. A neurodevelopmental origin of behavioral individuality in the Drosophila visual system10.1126/science.aaw7182 ↗
29. Temporal differences between load and movement signal integration in the sensorimotor network of an insect leg10.1152/jn.00399.2021 ↗
30. A novel strain sensor based on the campaniform sensillum of insects10.1098/rsta.2001.0929 ↗
31. Response characteristics of single trochanteral campaniform sensilla in the stick insect, Cuniculina impigra10.1111/j.1365-3032.1986.tb00386.x ↗
32. Identification of the origin of force-feedback signals influencing motor neurons of the thoraco-coxal joint in an insect10.1007/s00359-019-01334-4 ↗
33. Distributed processing of load and movement feedback in the premotor network controlling an insect leg joint10.1152/jn.00090.2021 ↗
34. A computational model of insect campaniform sensilla predicts encoding of forces during walking10.1088/1748-3190/ac1ced ↗
35. Ultra high-resolution biomechanics suggest that substructures within insect mechanosensors decisively affect their sensitivity10.1098/rsif.2022.0102 ↗
36. A parametric finite element model of leg campaniform sensilla in Drosophila to study campaniform sensilla location and arrangement10.1098/rsif.2024.0559 ↗
37. Finite element analysis of strains in a Blaberus cockroach leg during climbing
38. Sensory signals of unloading in insects are tuned to distinguish leg slipping from load variations in gait: experimental and modeling studies10.1152/jn.00285.2022 ↗
39. Gere · 2001
40. Tough 1500 Resin
41. Load feedback from a dynamically scaled robotic model of carausius morosus middle leg
42. Experimental accuracy of two dimensional strain measurements using Digital Image Correlation10.1016/j.engstruct.2012.08.018 ↗
43. Biomimetics of campaniform sensilla: measuring strain from the deformation of holes10.1016/S1672-6529(07)60015-8 ↗
44. Unusual uses of holes—With input from biology10.1016/j.jmbbm.2010.10.002 ↗
45. A biomimetic fruit fly robot for studying the neuromechanics of legged locomotion10.1088/1748-3190/ad80ec ↗
46. Mantisbot is a robotic model of visually guided motion in the praying mantis10.1016/j.asd.2017.03.001 ↗
47. What is morphological computation? On how the body contributes to cognition and control10.1162/ARTL_a_00219 ↗
48. Towards a theoretical foundation for morphological computation with compliant bodies10.1007/s00422-012-0471-0 ↗
49. Fabrication of cost effective and high sensitivity resistive strain gauge using DIW technique10.1016/j.sna.2017.03.003 ↗
50. 3D printing by direct ink writing (DIW) of UV-curable elastomers with embedded sensors for soft robotic and flexible electronic applications10.1088/2058-8585/ade5b8 ↗
51. tuning printability and adhesion of a silver-based ink for high-performance strain gauges manufactured via direct ink writing10.1021/acsomega.4c09042 ↗