Mechanisms of decrease in fatigue crack propagation resistance in irradiated and melted UHMWPE
Source abstract
Abstract
Adhesive/abrasive wear in ultra-high molecular weight polyethylene (UHMWPE) has been minimized by radiation cross-linking. Irradiation is typically followed by melting to eliminate residual free radicals that cause oxidative embrittlement. Irradiation and subsequent melting reduce the strength and fatigue resistance of the polymer. We determined the radiation dose dependence and decoupled the effects of post-irradiation melting on the crystallinity, mechanical properties and fatigue crack propagation resistance of room temperature irradiated UHMWPE from those of irradiation alone. Stiffness and yield strength, were largely not affected by increasing radiation dose but were affected by changes in crystallinity, whereas plastic properties, ultimate tensile strength and elongation at break, were dominated at different radiation dose ranges by changes in radiation dose or crystallinity. Fatigue crack propagation resistance was shown to decrease with increase in radiation dose and with decrease in crystalline content. Morphology of fracture surfaces revealed loss of ductility with increase in radiation dose and more detrimental effects on ductility at lower radiation doses after post-irradiation melting.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Total Knee Arthroplasty Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Muratoglu OK, Kurtz S. Alternate bearing surfaces in hip replacement. In: Sinha R, editor. Hip replacement. Current trends and controversies. New York, 2002.10.1201/9780203909348.ch1 ↗
2. Osteolysis in alloarthroplasty of the hip. The role of bone cement fragmentation10.1097/00003086-199009000-00014 ↗
3. Osteolysis in alloarthroplasty of the hip: the role of ultra-high molecular weight polyethylene wear particles10.1097/00003086-199009000-00013 ↗
4. The relationship between the clinical performance and large deformation mechanical behavior of retrieved UHMWPE tibial inserts10.1016/S0142-9612(99)00178-7 ↗
5. Plasticity-induced damage layer is a precursor to wear in radiation-cross-linked UHMWPE acetabular components for total hip replacement. Ultra-high-molecular-weight polyethylene10.1016/S0883-5403(99)90086-4 ↗
6. Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE)10.1016/S0142-9612(99)00039-3 ↗
7. 1999 HAP Paul Award. A novel method of crosslinking UHMWPE to improve wear, reduce oxidation and retain mechanical properties10.1054/arth.2001.20540 ↗
8. Development of an extremely wear resistant ultra-high molecular weight polyethylene for total hip replacements10.1002/jor.1100170203 ↗
9. Perspectives in stabilisation of polyolefins10.1007/b13521 ↗
10. Crystallization behavior or ultrahigh molecular weight polyethylene as a function of in vacuo gamma-irradiation10.1021/ma0008241 ↗
11. Location of radiation-induced cross-links and damage in melt-crystallized polyethylene
12. Radiation-induced crosslinking: effect on structure of polyethylene10.1007/BF01412784 ↗
13. Thomas DE, Jahan MS, Trieu HH, Haggard WO, Conta RL, Parr JE. A study of free radicals in irradiated/aged UHMWPE materials. Wright Medical 1996.
14. Jahan MS, Thomas DE, Trieu HH, Haggard WO, Conta RL, Parr JE. Investigation of free radicals in shelf-aged polyethylene tibial components. Wright Medical 1996.
15. A study of long-lived free radicals in gamma-irradiated medical grade polyethlene10.1016/S0969-806X(01)00431-5 ↗
16. Free radicals trapped in polyethylene crystals10.1080/00222349508215534 ↗
17. In vivo UHMWPE biodegradation of retrieved prosthesis10.1016/S0142-9612(98)00013-1 ↗
18. Deformation, yielding, fracture and fatigue behavior of conventional and highly cross-linked ultra high molecular weight polyethylene10.1016/j.biomaterials.2004.03.022 ↗
19. A-tocopherol doped irradiated UHMWPE for high fatigue resistance and low wear10.1016/j.biomaterials.2003.12.048 ↗
20. Puertolas J, Urries I, Medel F, Madre M, Leiva K, Gomez-Barrena E, et al. Fatigue behavior of electron-beam irradiated UHMWPE. Transactions of the 50th annual meeting of the orthopaedic research society 2004: 211.
21. Radiation and chemical crosslinking promote strain hardening behavior and molecular alignment in ultra high molecular weight polyethylene during multi-axial loading conditions10.1016/S0142-9612(99)00038-1 ↗
22. The effect of degree of crosslinking on the fatigue crack initiation and propagation resistance of orthopedic-grade polyethylene10.1002/jbm.a.10606 ↗
23. Compression and tension fatigue resistance of medical grade ultra high molecular weight polyethylene: the effect of morphology, sterilization, aging and temperature10.1016/S0032-3861(99)00199-8 ↗
24. Bhattacharyya S, Matrisciano L, Spiegelberg S, Harris W, Muratoglu O. Mechanical elimination of residual free radicals in an irradiated UHMWPE rod: advantages over melting. In: 50th annual meeting of the orthopaedic research society, 2004. p. 1474.