journal article·2003-04

In vitro studies of plasma-sprayed hydroxyapatite/Ti-6Al-4V composite coatings in simulated body fluid (SBF)

Y.W Gu, K.A Khor, P Cheang

Biomaterials· Volume 24· Issue 9
Publisher page

Abstract

The bioactivity of plasma-sprayed hydroxyapatite (HA)/Ti-6Al-4V composite coatings was studied by soaking the coatings in simulated body fluid (SBF) for up to 8 weeks. This investigation was aimed at elucidating the biological behaviour of plasma-sprayed HA/Ti-6Al-4V composite coatings by analyzing the changes in chemistry, and crystallinity of the composite coating in a body-analogous solution. Phase composition, microstructure and calcium ion concentration were analyzed before, and after immersion. The mechanical properties, such as tensile bond strength, microhardness and Young's modulus were appropriately measured. Results demonstrated that the tensile bond strength of the composite coating was significantly higher than that of pure HA coatings even after soaking in the SBF solution over an 8-weeks period. Dissolution of Ca-P phases in SBF was evident after 24h of soaking, and, a layer of carbonate-apatite covered the coating surface after 2 weeks of immersion. The mechanical properties were found to diminish with soaking duration. However, slight variation in mechanical properties was found after supersaturation of the calcium ions was attained with the precipitation of the calcium phosphate layers.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Bone formation process in porous calcium carbonate and hydroxyapatite10.1002/jbm.820260705 ↗
2. Coating of implants with hydroxyapatite material connections between bone and metal10.1002/(SICI)1527-2648(199910)1:2<95::AID-ADEM95>3.0.CO;2-P ↗
3. Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants10.1557/JMR.1998.0015 ↗
4. Structural evolution of sol–gel-derived hydroxyapatite10.1016/S0142-9612(01)00295-2 ↗
5. Hydroxyapatite coating on Ti6A14V alloy using a sol–gel derived precursor10.1016/S0254-0584(01)00474-6 ↗
6. Characterization of calcium phosphate bioceramic films using ion beam analysis techniques10.1016/S0257-8972(01)01519-5 ↗
7. Electron beam deposition of thin bioceramic film for biomedical implants10.1016/S0040-6090(01)01385-2 ↗
8. Structural characterization of pulsed laser deposited hydroxyapatite film on titanium substrate10.1016/S0142-9612(97)00024-0 ↗
9. Plasma-sprayed hydroxyapatite (HA) coatings with flame-spheroidized feedstock10.1016/S0142-9612(99)00275-6 ↗
10. Physicochemical study of plasma-sprayed hydroxyapatite-coated implants in humans10.1002/1097-4636(20010315)54:4<480::AID-JBM30>3.0.CO;2-T ↗
11. Hydroxyapatite-coated Ti-6Al-4V Part 110.1016/S0142-9612(01)00321-0 ↗
12. Structure and immersion behaviour of plasma sprayed apatite-matrix coatings10.1016/S0142-9612(00)00247-7 ↗
14. Solutions able to reproduce in vivo surface structure changes in bioactive glass-ceramic A-W10.1002/jbm.820240607 ↗
15. Ca,P-rich layer formed on high-strength bioactive glass-ceramic A-W10.1002/jbm.820240306 ↗
16. An in vitro investigation of plasma sprayed hydroxyapatite (HA) coatings produced with flame-spheroidized feedstock10.1016/S0142-9612(01)00183-1 ↗
17. Biomimetic hydroxyapatite coating on metal implants10.1111/j.1151-2916.2002.tb00126.x ↗
18. Acceleration of bone-like crystal growth on polarized plasma sprayed HAp in SBF10.4028/www.scientific.net/KEM.218-220.145 ↗
19. Comparison of plasma-sprayed hydroxyapatite coatings and hydroxyapatite/tricalcium phosphate composite coatings10.1002/1097-4636(20010605)55:3<360::AID-JBM1040>3.0.CO;2-Q ↗
20. Hydroxyapatite coated total hip prostheses10.4028/www.scientific.net/KEM.218-220.491 ↗
21. Deposition of layered bioceramic hydroxyapatite/TiO2 coatings on titanium alloys using a hybrid technique of micro-arc oxidation and electrophoresis10.1016/S0257-8972(99)00612-X ↗
22. Loss of hydroxyapatite coating on retrieved total hip components10.1016/S0883-5403(06)80037-9 ↗
23. Osseointegration of sintered porous-surfaced and plasma spray-coated implants10.1002/(SICI)1097-4636(199911)47:2<127::AID-JBM3>3.0.CO;2-C ↗
24. Developments of plasma-sprayed biomedical coatings
25. Investigation of composite hydroxyapatite powder for plasma spraying bioceramic coatings10.1081/AMP-120003528 ↗
26. Plasma-sprayed hydroxyapatite coating on titanium alloy with ZrO2 second phase and ZrO2 intermediate layer10.1016/S0257-8972(01)01532-8 ↗
27. Khor KA, Gu YW, Quek CH, Cheang P. Plasma spraying of hydroxyapatite/Ti-6Al-4V composite coatings: preparation and characterization, submitted for publication.
28. Bonding mechanism of bioactive glass-ceramic A-W to living bone
29. Elastic response of thermal spray deposits under indentation tests10.1111/j.1151-2916.1997.tb03093.x ↗
30. A simple method for determining elastic-modulus-to hardness ratios using Knoop indentation measurements10.1111/j.1151-2916.1982.tb10357.x ↗
31. The role of amorphous phase in nucleating bone-like apatite on plasma sprayed hydroxyapatite coatings in simulated body fluid10.1023/A:1018529924527 ↗
32. In vitro changes of hydroxyapatite coatings
33. In vitro calcium phosphate formation on SiO2-Na2O-CaO-P2O5 glass reinforced hydroxyapatite composite10.1007/BF00121258 ↗
34. Bonelike hydroxyapatite induction by a gel-derived titania on a titanium substrate10.1111/j.1151-2916.1994.tb05407.x ↗
35. Plasma spraying induced changes of calcium phosphate ceramic characteristics and the effect on in vitro stability10.1007/BF00702942 ↗
36. Plasma sprayed coatings of calcium phosphate
37. Plasma spraying of zirconia-reinforced hydroxyapatite composite coatings on titanium, Part II. Dissolution behaviour in simulated body fluid and bonding degradation10.1023/A:1018535606393 ↗
38. Sidney SWK. Thermal spraying of bioceramic (hydroxyapatite) coatings. Master of Engineering thesis, Nanyang Technological University, Singapore, 2000.