journal article·2009-10

Mixed-mode fracture of human cortical bone

Elizabeth A. Zimmermann, Maximilien E. Launey, Holly D. Barth, Robert O. Ritchie

Biomaterials· Volume 30· Issue 29
Publisher page

Abstract

Although the mode I (tensile opening) fracture toughness has been the focus of most fracture mechanics studies of human cortical bone, bones in vivo are invariably loaded multiaxially. Consequently, an understanding of mixed-mode fracture is necessary to determine whether a mode I fracture toughness test provides the appropriate information to accurately quantify fracture risk. In this study, we examine the mixed-mode fracture of human cortical bone by characterizing the crack-initiation fracture toughness in the transverse (breaking) orientation under combined mode I (tensile opening) plus mode II (shear) loading using samples loaded in symmetric and asymmetric four-point bending. Whereas in most structural materials, the fracture toughness is increased with increasing mode-mixity (i.e., where the shear loading component gets larger), in the transverse orientation of bone the situation is quite different. Indeed, the competition between the maximum applied mechanical mixed-mode driving force and the weakest microstructural paths in bone results in a behavior that is distinctly different to most homogeneous brittle materials. Specifically, in this orientation, the fracture toughness of bone is markedly decreased with increasing mode-mixity.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Bone health and osteoporosis research · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. The true toughness of human cortical bone measured with realistically short cracks10.1038/nmat2221 ↗
2. Mechanistic aspects of fracture and R-curve behavior in human cortical bone10.1016/j.biomaterials.2004.02.017 ↗
3. Fracture toughness of human bone under tension10.1016/0021-9290(94)00069-G ↗
4. Rising crack-growth-resistance behavior in cortical bone: implications for toughness measurements10.1016/j.jbiomech.2003.11.003 ↗
5. Analysis of stresses and strains near the end of a crack traversing a plate10.1115/1.4011547 ↗
6. Mixed mode fatigue crack growth: a literature survey10.1016/S0013-7944(96)00071-9 ↗
7. Fracture toughness of polycrystalline ceramics in combined mode I and mode II loading10.1111/j.1151-2916.1989.tb05957.x ↗
8. Mixed-mode fracture toughness of ceramic materials10.1111/j.1151-2916.1990.tb05189.x ↗
9. When does a crack grow under mode II conditions?10.1007/BF00034020 ↗
10. Kinking of a crack out of an interface10.1115/1.3176078 ↗
11. Interfacial fracture toughness of a copper/alumina system and the effect of the loading phase angle10.1016/0167-6636(94)00063-8 ↗
12. Effects of non-planarity on the mixed mode fracture resistance of biomaterial interfaces10.1016/0001-6160(89)90017-5 ↗
13. Mixed-mode fracture: the four-point shear specimen10.1016/0956-7151(90)90037-H ↗
14. Mechanics and mechanisms of crack growth at or near ceramic–metal interfaces: interface engineering strategies for promoting toughness10.1016/0921-5093(93)90325-9 ↗
15. Martin · 1989
16. Currey · 2002
17. Morphology of the osteonal cement line in human bone10.1002/ar.1092170302 ↗
18. Composition of the cement line and its possible mechanical role as a local interface in human compact bone10.1016/0021-9290(88)90132-7 ↗
19. Scanning-electron microscopy studies of ‘ground substance’ in cement lines, resting lines, hypercalcified rings and reversal lines of human cortical bone10.1159/000145373 ↗
20. Cement lines of secondary osteons in human bone are not mineral-deficient: new data in a historical perspective10.1002/ar.a.20214 ↗
21. Resistance to crack growth in human cortical bone is greater in shear than in tension10.1016/0021-9290(96)00009-7 ↗
22. Orientation and loading condition dependence of fracture toughness in cortical bone10.1016/S0928-4931(00)00142-9 ↗
23. Asymmetric four-point crack specimen10.1115/1.321168 ↗
24. Tada · 1985
25. Anderson · 1995
26. Calculation of stress intensity factors for combined mode bend specimens
27. X-ray tomographic microscopy (XTM) using synchrotron radiation10.1146/annurev.ms.22.080192.001005 ↗
28. Software tools for quantification of X-ray microtomography at the UGCT10.1016/j.nima.2007.05.073 ↗
29. Fracture of wood under mixed mode loading: II. Experimental investigation of Picea abies10.1016/S0013-7944(00)00128-4 ↗
30. Mixed-mode fracture of ceramics in asymmetric four-point bending: effect of crack-face grain interlocking/bridging10.1111/j.1151-2916.1996.tb09037.x ↗