Highly elastomeric poly(glycerol sebacate)-co-poly(ethylene glycol) amphiphilic block copolymers
Source abstract
Abstract
Poly(glycerol sebacate) (PGS), a tough elastomer, has been proposed for tissue engineering applications due to its desired mechanical properties, biocompatibility and controlled degradation. Despite interesting physical and chemical properties, PGS shows limited water uptake capacity (∼2%), thus constraining its utility for soft tissue engineering. Therefore, a modification of PGS that would mimic the water uptake and water retention characteristics of natural extracellular matrix is beneficial for enhancing its utility for biomedical applications. Here, we report the synthesis and characterization of highly elastomeric poly(glycerol sebacate)-co-polyethylene glycol (PGS-co-PEG) block copolymers with controlled water uptake characteristics. By tailoring the water uptake property, it is possible to engineer scaffolds with customized degradation and mechanical properties. The addition of PEG results in almost 15-fold increase in water uptake capacity of PGS, and improves its mechanical stability under dynamic loading conditions. PGS-co-PEG polymers show elastomeric properties and can be subjected to serve deformation such as bending and stretching. The Young's modulus of PGS-co-PEG can be tuned from 13 kPa to 2.2 MPa by altering the amount of PEG within the copolymer network. Compared to PGS, more than six-fold increase in elongation was observed upon PEG incorporation. In addition, the rate of degradation increases with an increase in PEG concentration, indicating that degradation rate of PGS can be regulated. PGS-co-PEG polymers also support cell proliferation, and thus can be used for a range of tissue engineering applications.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications · Hydrogels: synthesis, properties, applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Designing materials for biology and medicine10.1038/nature02388 ↗
2. Progress in tissue engineering10.1038/scientificamerican0509-64 ↗
3. Hydrogels in regenerative medicine10.1002/adma.200802106 ↗
4. Bioinspired materials for controlling stem cell fate10.1021/ar900226q ↗
5. New class of biodegradable polymers formed from reactions of an inorganic functional group10.1021/ma300190b ↗
6. Orthopaedic applications for PLA-PGA biodegradable polymers10.1016/S0749-8063(98)70099-4 ↗
7. Elastin biosynthesis: the missing link in tissue-engineered blood vessels10.1016/j.cardiores.2006.02.021 ↗
8. Synthesis, characterization and protein adsorption behaviors of PLGA/PEG di-block co-polymer blend films10.1016/S0927-7765(99)00162-9 ↗
9. Recent advances in synthetic bioelastomers10.3390/ijms10104223 ↗
10. Functionalized synthetic biodegradable polymer scaffolds for tissue engineering10.1002/mabi.201100466 ↗
11. Advanced materials for co-delivery of drugs and genes in cancer therapy10.1002/adhm.201200109 ↗
12. Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acids10.1002/(SICI)1097-4636(1999)48:3<342::AID-JBM20>3.0.CO;2-7 ↗
13. Biodegradable polymers as biomaterials10.1016/j.progpolymsci.2007.05.017 ↗
14. In vivo degradation characteristics of poly(glycerol sebacate)10.1002/jbm.a.10534 ↗
15. Synthesis, properties and biomedical applications of poly(glycerol sebacate) (PGS): a review10.1016/j.progpolymsci.2012.02.001 ↗
16. A tough biodegradable elastomer10.1038/nbt0602-602 ↗
17. Characterisation of a soft elastomer poly(glycerol sebacate) designed to match the mechanical properties of myocardial tissue10.1016/j.biomaterials.2007.09.010 ↗
18. Spectroscopic evaluation, thermal, and thermomechanical characterization of poly(glycerol-sebacate) with variations in curing temperatures and durations10.1007/s10853-010-4259-0 ↗
19. The polycondensing temperature rather than time determines the degradation and drug release of poly(glycerol-sebacate) doped with 5-fluorouracil10.1163/092050611X562157 ↗
20. The application of poly (glycerol–sebacate) as biodegradable drug carrier10.1016/j.biomaterials.2009.06.007 ↗
21. Mechanisms for the transport of alpha, omega-dicarboxylates through the mitochondrial inner membrane10.1074/jbc.271.41.25338 ↗
22. Dicarboxylic acid, an alternate fuel substrate in parenternal nutrition:an update10.1016/S0261-5614(95)80011-5 ↗
23. The biological origin of ketotic dicarboxylic aciduria. In vivo and in vitro investigations of the omega-oxidation of C6-C16-monocarboxylic acid in unstarved, starved and diabetic rats10.1016/0005-2760(81)90298-8 ↗
24. Hemocompatibility evaluation of poly (glycerol-sebacate) in vitro for vascular tissue engineering10.1016/j.biomaterials.2006.04.010 ↗
25. Tailoring the mechanical properties of 3D-designed poly (glycerol sebacate) scaffolds for cartilage applications10.1002/jbm.a.32653 ↗
26. Biocompatibility analysis of poly (glycerol sebacate) as a nerve guide material10.1016/j.biomaterials.2005.02.004 ↗
27. Retinal transplantation using surface modified poly (glycerol-co-sebacic acid) membranes10.1016/j.biomaterials.2010.07.026 ↗
28. Effect of biodegradation and de novo matrix synthesis on the mechanical properties of VIC-seeded PGS-PCL scaffolds10.1016/j.actbio.2012.11.014 ↗
29. Hybrid PGS–PCL microfibrous scaffolds with improved mechanical and biological properties10.1002/term.313 ↗
30. The influence of lactic on the properties of poly (glycerol-sebacate-lactic acid)10.1016/j.msec.2008.06.010 ↗
31. The in vitro degradation of poly(glycolic acid) sutures–effect of pH10.1002/jbm.820150604 ↗
32. Inspiration and application in the evolution of biomaterials10.1038/nature08601 ↗
33. Complexity in biomaterials for tissue engineering10.1038/nmat2441 ↗
34. Hydrogels for tissue engineering: scaffold design variables and applications10.1016/S0142-9612(03)00340-5 ↗
35. Mihaila SM, Gaharwar AK, Reis RL, Marques AP, Gomes ME, Khademhosseini A. Photocrosslinkable kappa-carrageenan hydrogels for tissue engineering applications. Adv Healthc Mater. http://dx.doi.org/10.1002/adhm201200317.
36. Preparation and properties of a novel biodegradable polyester elastomer with functional groups10.1163/092050609X12464345064325 ↗
37. Degradation behaviour of block copolymers containing poly(lactic-glycolic acid) and poly(ethylene glycol) segments10.1016/0142-9612(95)00323-1 ↗
38. Biodegradable polymers applied in tissue engineering research: a review10.1002/pi.2108 ↗
39. Flory · 1953
40. Examination of the theories of rubber elasticity using an ideal polymer network10.1021/ma201088r ↗
41. Large strain hysteresis and mullins effect of tough double-network hydrogels10.1021/ma062924y ↗
42. Myocardial stiffness derived from end-systolic wall stress and logarithm of reciprocal of wall thickness. Contractility index independent of ventricular size10.1161/01.CIR.82.4.1352 ↗
43. Biomaterials in cardiac tissue engineering: ten years of research survey10.1016/j.mser.2007.08.001 ↗
44. Comparative study of the intrinsic mechanical properties of the human acetabular and femoral head cartilage10.1002/jor.1100120306 ↗
45. Highly extensible, tough, and elastomeric nanocomposite hydrogels from poly(ethylene glycol) and hydroxyapatite nanoparticles10.1021/bm200027z ↗
46. Transparent, elastomeric and tough hydrogels from poly(ethylene glycol) and silicate nanoparticles10.1016/j.actbio.2011.07.023 ↗
47. Toxicity, biodegradation and elimination of polyanhydrides10.1016/S0169-409X(02)00052-2 ↗
48. Surface hydration: principles and applications toward low-fouling/nonfouling biomaterials10.1016/j.polymer.2010.08.022 ↗
49. Physically crosslinked nanocomposites from silicate-crosslinked PEO: mechanical properties and osteogenic differentiation of human mesenchymal stem cells10.1002/mabi.201100508 ↗
50. Assessment of using laponite® cross-linked poly(ethylene oxide) for controlled cell adhesion and mineralization10.1016/j.actbio.2010.09.015 ↗
51. Biofibres, biodegradable polymers and biocomposites: an overview10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W ↗
52. Mechanisms of polymer degradation and erosion10.1016/0142-9612(96)85755-3 ↗
53. Six Bioabsorbable polymers:in vitro acute toxicity of accumulated degradation products10.1002/jab.770050208 ↗
54. Synthesis, swelling behavior, and biocompatibility of novel physically cross-linked polyurethane-block-poly(glycerol methacrylate) hydrogels10.1021/bm0507047 ↗
55. Synthesis and characterization of polyurethane-block-poly(2-hydroxyethyl methacrylate) hydrogels and their surface modification to promote cell affinity10.1177/0883911511398713 ↗