journal article·2003-11

A removal torque of the laser-treated titanium implants in rabbit tibia

Sung-Am Cho, Sang-Kyoo Jung

Biomaterials· Volume 24· Issue 26
Publisher page

Abstract

The purpose of the present study is to evaluate the significance of different surface textures by comparison of the removal forces for laser-treated and machined titanium screw 8 weeks after the installation in rabbit tibia. A total of 14 screw shaped, commercially pure titanium implants with a length of 5 mm, a diameter of 3.75 mm were grouped as follows: Group A: seven implants left as-machined; Group B: seven implants treated with laser method (CSM implant, CSM company, Daegu, Korea) Topographic evaluation was performed with scanning electron microscope (Hitachi S-4200, Japan) to compare the surface structure of laser-treated and machined ones. Installation procedures were done according to Branemark protocol after pre-threading, machined implants were inserted in right tibia metaphysics and laser-treated surface implants were inserted in left ones. Eight weeks post surgically seven rabbits were sacrificed. The implant sites were exposed, and the bone and soft tissues that had formed on top of the implants were carefully removed. Subsequently, the force needed to unscrew the implants (n=14) was measured using a digital torque gauge (Mark-10 corporation, USA). Scanning electron micrographs of the laser-treated and machined control groups demonstrated created a deep and regular honey-comb pattern with small pore, while machined treatment created the typical microscopically grooved and relatively smooth surface characteristic. Eight weeks after implant placement, the average removal torque was 23.58+/-3.71 N cm for the machined implants, 62.57+/-10.44 N cm for the laser-treated implants. The torque measurements yielded statistically significant differences between the machined group and the laser-etched group (p=0.00055) (Wilcoxon's signed-rank test). The laser-treated group achieved higher removal torque values compared to the machined control group.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Tailored surface modification by ion implantation and laser treatment10.1126/science.226.4675.615 ↗
2. Scanning electron microscopical analysis of laser-treated titanium implants surfaces—a comparative study10.1016/S0142-9612(00)00002-8 ↗
3. A removal torque and historphometric study of commercially pure niobium and titanium implants in rabbit bone10.1034/j.1600-0501.1991.020103.x ↗
4. Osseous adaptation to continuous loading of rigid endosseous implants10.1016/0002-9416(84)90301-4 ↗
5. Removal torque and histomorphometric investigation of 4 different titanium surfaces
6. The role of implants surface characteristics in the healing of bone10.1177/10454411960070040301 ↗
7. Role of material surfaces in regulating bone and cartilage cell response10.1016/0142-9612(96)85758-9 ↗
8. Attachment and growth of periodontal cells on smooth and rough titanium
9. The effects of implant surface topography on the behavior of cells
10. The effect of surface macrotexture and hydroxylapatite coating on the mechanical strengths and histologic profiles of titanium implant materials10.1002/jbm.820211205 ↗
11. Influence of surface characteristics on bone integration of titanium imlants, a histomorphometric study in miniature pigs10.1002/jbm.820250708 ↗
12. Integration of screw implants in the rabbit
13. Torque and histomorphometric evaluation of c.p. titanium screws blasted with 25-μm and 75-μm sized particles of A12O310.1002/(SICI)1097-4636(199602)30:2<251::AID-JBM16>3.0.CO;2-P ↗
14. Sul YT. On the bone response to oxidized titanium implants. Ph.D. thesis, Department of Biomaterials/Handicap Research, University of Gothenburg, Sweden; 2002.
15. Mustafa K, Wennerberg A, Wroblewski J, Hultenby K, Lope BS, Arvidson K. Determining optimal surface roughness of TiO (2) blasted titanium implant material for attachment, proliferation and differentiation of cells derived from human mandibular alveolar bone. Clin Oral Implant Res 2001;12:515–25.10.1034/j.1600-0501.2001.120513.x ↗
16. Pore diameter of more than 100μm is not requisite for bone ingrowth in rabbits10.1002/jbm.1069 ↗
17. The improvement of adhesion of polymer of titanium surface after treatment with TEA-CO2 laser irradiation
18. Surface hardening treatment of pure titanium by carbon dioxide laser10.1023/A:1006720306017 ↗