In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM
Source abstract
Abstract
This study evaluated the effect of multiple consecutive adhesive resin coatings of adhesive bonded to human dentin on nanoleakage and resin-dentin bond strength. Resin bonded dentin specimens were prepared using a total-etch adhesive (One-Step Plus) applied as multiple consecutive coating, or using two self-etch adhesive systems (iBond or Fluoro Bond). For the total-etch adhesive, resin application and air evaporation were performed 1, 2, 3, or 4 times. The self-etch adhesives were applied according to manufacturers' instructions. Resin-dentin bonded beams were prepared and immersed in water (control) or ammoniacal silver nitrate. After storage, microtensile bond strengths were measured. The fractured surfaces were examined by scanning and transmission electron microscopy (SEM and TEM), and energy-dispersive X-ray spectrometry (EDX). No significant differences in bond strength were found between water and silver nitrate storage groups. Several types of silver depositions (spotted, reticular, or water trees) were found in adhesive joints. The bond strengths of the single coated specimens of the total-etch adhesive were significantly lower than those receiving 2-4 coatings. Single coats produced more nanoleakage than multiple coats. However, no correlation was found between the bond strengths and nanoleakage between the different adhesives (total-etch adhesive with different conditions or self-etch adhesives).
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Dental Anxiety and Anesthesia Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Microporous dentin zone beneath resin-impregnated layer
2. Nanoleakage
3. Comparative SEM and TEM observations of nanoleakage within the hybrid layer
4. Nanoleakage at the composite–dentin interface
5. Long-term durability of resin dentin interface
6. Relationship between nanoleakage and long-term durability of dentin bonds
7. The effect of thermocycling regimens on the nanoleakage of dentin bonding systems10.1016/S0109-5641(01)00081-1 ↗
8. The effect of load cycling on the nanoleakage of dentin bonding systems10.1016/S0109-5641(01)00029-X ↗
9. Two modes of nanoleakage expression in single-step adhesives10.1177/154405910208100708 ↗
10. Reversal of compromised bonding in bleached enamel10.1177/154405910208100709 ↗
11. Water-treeing
12. Aging affects two modes of nanoleakage expression in bonded dentin10.1177/154405910308200710 ↗
13. Submicron hiati in acid-etched dentin are artifacts of desiccation10.1016/S0109-5641(02)00007-6 ↗
14. Aging affects two modes of nanoleakage expression in bonded dentin10.1177/154405910308200710 ↗
15. How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simultaneously?
16. The long-term durability of bond strength to dentin
17. Quantitative contribution of the collagen network in dentin hybridization
18. Tensile properties of resin-infiltrated demineralized human dentin10.1177/00220345950740041001 ↗
19. Dentin bond durability after three years using a dentin bonding agent with and without priming10.1016/S0109-5641(96)80038-8 ↗
20. A tensile test to facilitate identification of defects in dentin bonded specimens10.1016/S0300-5712(97)00021-3 ↗
21. Unprotected protein at the dentin–adhesive interface
22. A novel approach to AFM characterization of adhesive tooth–biomaterials interfaces10.1002/(SICI)1097-4636(199910)47:1<85::AID-JBM12>3.0.CO;2-H ↗
23. Effect of etchant variation on wet and dry dentin bonding primed with 4-META/acetone10.1016/S0109-5641(00)00017-8 ↗
24. Interfacial chemistry of the dentin/adhesive bond10.1177/00220345000790070501 ↗
25. The extent to which resin can infiltrate dentin by acetone-based adhesives10.1177/002203450208100116 ↗
26. Over-etching effects on micro-tensile bond strength and failure patterns for two dentin bonding systems10.1016/S0300-5712(02)00004-0 ↗
27. Degradation of resin–dentin bonds using NaOCl storage10.1016/S0109-5641(02)00083-0 ↗
28. Effect of long-term water storage on dentin bonding
29. Long-term durability of dentin bonds made with a self-etching primer, in vivo10.1177/00220345990780041101 ↗
30. The influence of storage on dentin bond durability of resin cement10.1016/S0109-5641(99)00061-5 ↗
31. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years10.1177/00220345000790060601 ↗
32. Resin-tooth adhesive interfaces after long-term function
33. SEM and TEM analysis on water degradation of human dentinal collagen10.1002/jbm.b.10560 ↗
34. Micromorphological changes in resin-dentin bonds after 1 year of water storage10.1002/jbm.10208 ↗
35. Degradation patterns of different adhesives and bonding procedures10.1002/jbm.b.10010 ↗
36. In vitro degradation of resin–dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy10.1016/S0142-9612(03)00262-X ↗
37. Four-year water degradation of total-etch adhesives bonded to dentin10.1177/154405910308200212 ↗
38. Field emission SEM comparison of four postfixation drying techniques for human dentin10.1002/jbm.820290911 ↗
39. Nanoleakage at the dentin adhesive interface vs. μ-Tensile bond strength
40. Relationship between bond strengths and nanoleakage
41. Adhesive phase separation at the dentin interface under wet bonding conditions10.1002/jbm.10364 ↗
42. Hybridization efficiency of the adhesive/dentin interface with wet bonding10.1177/154405910308200213 ↗
43. Quantifying adhesive penetration in adhesive/dentin interface using confocal Raman microscopy10.1002/jbm.1215 ↗
44. Effect of changing application times on adhesive systems bond strength