journal article·2017-02

The impact of monomer sequence and stereochemistry on the swelling and erosion of biodegradable poly(lactic-co-glycolic acid) matrices

Michael A. Washington, Devin J. Swiner, Kerri R. Bell, Morgan V. Fedorchak, Steven R. Little, Tara Y. Meyer

Biomaterials· Volume 117
Publisher page

Abstract

Monomer sequence is demonstrated to be a primary factor in determining the hydrolytic degradation profile of poly(lactic-co-glycolic acid)s (PLGAs). Although many approaches have been used to tune the degradation of PLGAs, little effort has been expended in exploring the sequence-control strategy exploited by nature in biopolymers. Cylindrical matrices and films prepared from a series of sequenced and random PLGAs were subjected to hydrolysis in a pH 7.4 buffer at 37 °C. Swelling ranged from 107% for the random racemic PLGA with a 50:50 ratio of lactic (L) to glycolic (G) units to 6% for the sequenced alternating copolymer poly LG. Erosion followed an inverse trend with the random 50:50 PLGA showing an erosion half-life of 3-4 weeks while poly LG required ca. >10 weeks. Stereosequence was found to play a large role in determining swelling and erosion; stereopure analogs swelled less and were slower to lose mass. Molecular weight loss followed similar trends and increases in dispersity correlated with the onset of significant swelling. The relative proportion of rapidly cleavable G-G linkages relative to G-L/L-G (moderate) and L-L (slow) correlates strongly with the degree of swelling observed and the rate of erosion. The dramatic sequence-dependent variation in swelling, in the absence of a parallel hydrophilicity trend, suggest that osmotic pressure, driven by the differential accumulation of degradation products, plays an important role.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Advanced Drug Delivery Systems · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. An overview of poly(lactic-co-glycolic) acid (PLGA)-based biomaterials for bone tissue engineering10.3390/ijms15033640 ↗
2. A novel controlled release formulation for the anticancer drug paclitaxel (Taxol®): PLGA nanoparticles containing Vitamin E TPGS10.1016/S0168-3659(02)00320-6 ↗
3. Paclitaxel-loaded PLGA nanoparticles: preparation, physicochemical characterization and in vitro anti-tumoral activity10.1016/S0168-3659(02)00212-2 ↗
4. Encapsulation of 9-nitrocamptothecin, a novel anticancer drug, in biodegradable nanoparticles: factorial design, characterization and release kinetics10.1016/j.ejpb.2006.09.004 ↗
5. Biomedical applications of biodegradable polymers10.1002/polb.22259 ↗
6. Self-reinforced poly(lactide)/poly(glycolide) 80/20 screws take more than 1½ years to resorb in rabbit cranial bone10.1002/jbm.b.30013 ↗
7. Poly(lactide-co-glycolide) porous scaffolds for tissue engineering and regenerative medicine10.1098/rsfs.2011.0123 ↗
8. FDA's regulatory science program for generic PLA/PLGA-based drug products
9. Poly(lactic-co-glycolic acid) (PLGA) as biodegradable controlled drug delivery carrier10.3390/polym3031377 ↗
10. A “tool box” for rational design of degradable controlled release formulations10.1039/C0JM01668C ↗
11. Sequence-controlled polymers10.1126/science.1238149 ↗
12. Lutz · 2014 · 408
13. Sequence control in polymer synthesis10.1039/b806413j ↗
14. Microstructure control: an underestimated parameter in recent polymer design10.1002/macp.201200475 ↗
15. Sequence matters: modulating electronic and optical properties of conjugated oligomers via tailored sequence10.1021/ma400123r ↗
16. Periodic incorporation of pendant hydroxyl groups in repeating sequence PLGA copolymers10.1002/marc.201000608 ↗
17. Synthesis of repeating sequence copolymers of lactic, glycolic, and caprolactic acids10.1002/pola.24610 ↗
18. Sequence-controlled copolymers prepared via entropy-driven ring-opening metathesis polymerization10.1021/acsmacrolett.5b00528 ↗
19. Sequence effects in conjugated donor–acceptor trimers and polymers10.1002/marc.201600086 ↗
20. Synthesis, structure and properties of poly(l-lactide-co-epsilon-caprolactone) statistical copolymers10.1016/j.jmbbm.2012.01.003 ↗
21. In vitro degradation studies and mechanical behavior of poly(epsilon-caprolactone-co-delta-valerolactone) and poly(epsilon-caprolactone-co-L-lactide) with random and semi-alternating chain microstructures10.1016/j.eurpolymj.2015.09.001 ↗
22. Effects of repeat unit sequence distribution and residual catalyst on thermal degradation of poly(L-lactide/epsilon-caprolactone) statistical copolymers10.1016/j.polymdegradstab.2013.04.003 ↗
23. Effects of chain microstructures on mechanical behavior and aging of a poly(L-lactide-co-epsilon-caprolactone) biomedical thermoplastic-elastomer10.1016/j.jmbbm.2012.03.008 ↗
24. Tensile behavior and dynamic mechanical analysis of novel poly(lactide/delta-valerolactone) statistical copolymers10.1016/j.jmbbm.2014.03.013 ↗
25. Effects of chain microstructures and derived crystallization capability on hydrolytic degradation of poly(L-lactide/epsilon-caprolactone) copolymers10.1016/j.polymdegradstab.2012.12.014 ↗
26. New insights into poly(lactic-co-glycolic acid) microstructure: using repeating sequence copolymers to decipher complex NMR and thermal behavior10.1021/ja102670n ↗
27. The effect of monomer order on the hydrolysis of biodegradable poly(lactic-co-glycolic acid) repeating sequence copolymers10.1021/ja306866w ↗
28. Exploiting sequence to control the hydrolysis behavior of biodegradable PLGA copolymers10.1021/ja200895s ↗
29. Episcleral drug film for better-targeted ocular drug delivery and controlled release using multilayered poly-ε-caprolactone (PCL)10.1016/j.actbio.2016.04.014 ↗
30. Effects of light exposure, pH, osmolarity, and solvent on the retinal pigment epithelial toxicity of vital dyes10.1016/j.ajo.2012.10.004 ↗
31. Controlled release of BMP-2 from a sintered polymer scaffold enhances bone repair in a mouse calvarial defect model10.1002/term.1497 ↗
32. Biodegradation and biocompatibility of PLA and PLGA microspheres10.1016/S0169-409X(97)00048-3 ↗
33. Why degradable polymers undergo surface erosion or bulk erosion10.1016/S0142-9612(02)00170-9 ↗
34. Mechanisms of polymer degradation and erosion10.1016/0142-9612(96)85755-3 ↗
35. Polymer bulk erosion10.1021/ma961627y ↗
36. Erosion of composite polymer matrices10.1016/S0142-9612(96)00151-2 ↗
37. Polymer degradation and erosion: mechanisms and applications
38. Polyanhydride degradation and erosion10.1016/S0169-409X(02)00051-0 ↗
39. Does PLGA microparticle swelling control drug release? new insight based on single particle swelling studies10.1016/j.jconrel.2015.06.039 ↗
40. Molecularly defined (L)-lactic acid oligomers and polymers: synthesis and characterization10.1002/pola.22944 ↗
41. Direct synthesis with melt polycondensation and microstructure analysis of poly(L-lactic acid-co-glycolic acid)10.1295/polymj.34.786 ↗
42. A strategy for control of “random” copolymerization of lactide and glycolide: application to synthesis of PEG-b-PLGA block polymers having narrow dispersity10.1021/ma201169z ↗
43. Microstructural analysis of poly[(L,L-lactide)-co-(glycolide)] by 1H and 13C NMR spectroscopy10.1016/0032-3861(96)81088-3 ↗
44. Polylactones, 39. Zn lactate-catalyzed copolymerization of L-lactide with glycolide or ε-caprolactone
45. Degradation of poly(lactic-co-glycolic acid) microspheres - effect of copolymer composition10.1016/0142-9612(95)93575-X ↗
46. Degradation kinetics of poly(lactic-co-glycolic) acid block copolymer cast films in phosphate buffer solution as revealed by infrared and raman spectroscopies10.1016/j.polymdegradstab.2011.07.011 ↗
47. The impact of chemical composition on the degradation kinetics of poly(lactic-co-glycolic) acid copolymers cast films in phosphate buffer solution10.1016/j.polymdegradstab.2011.12.010 ↗
48. Investigation of factors influencing the hydrolytic degradation of single PLGA microparticles10.1016/j.polymdegradstab.2015.04.025 ↗
49. Degradable polymeric materials for osteosynthesis: tutorial10.22203/eCM.v016a09 ↗
50. Bioabsorbable implants in orthopaedics: new developments and clinical applications10.5435/00124635-200109000-00001 ↗
51. Orthopaedic applications for PLA-PGA biodegradable polymers10.1016/S0749-8063(98)70099-4 ↗
52. How autocatalysis accelerates drug release from PLGA-based microparticles: a quantitative treatment10.1021/bm050228k ↗
53. Surface hydrophobicity of microparticles modulates adjuvanticity10.1039/c3tb20383b ↗
54. Synthesis and characterization of biodegradable poly(lactic-co-glycolic acid)10.1080/00222348.2014.1002325 ↗
55. The mechanisms of drug release in poly(lactic-co-glycolic acid)-based drug delivery systems - a review10.1016/j.ijpharm.2011.05.049 ↗
56. Degradable controlled-release polymers and polymeric nanoparticles: mechanisms of controlling drug release10.1021/acs.chemrev.5b00346 ↗
57. Functional aliphatic polyesters for biomedical and pharmaceutical applications10.1016/j.jconrel.2010.12.016 ↗
58. Towards developing surface eroding poly(alpha-hydroxy acids)10.1016/j.biomaterials.2005.12.006 ↗
59. Structure-property relationships in the case of the degradation of massive poly(α-hydroxy acids) in aqueous media10.1007/BF00700872 ↗
60. Hydrolytic degradation of amorphous films of L-lactide copolymers with glycolide and d-lactide10.1002/mame.200500386 ↗
61. Physiological degradation mechanisms of PLGA membrane films under oxygen plasma treatment10.1021/acs.jpcc.5b05011 ↗
62. Degradation rates of oral resorbable implants (polylactates and polyglycolates): rate modification with changes in PLA/PGA copolymer ratios10.1002/jbm.820110507 ↗
63. Non-invasive in vivo characterization of microclimate pH inside in situ forming PLGA implants using multispectral fluorescence imaging10.1016/j.jconrel.2014.01.024 ↗
64. Effect of acidic pH on PLGA microsphere degradation and release10.1016/j.jconrel.2007.05.034 ↗
65. Visual evidence of acidic environment within degrading poly(lactic-co-glycolic acid) (PLGA) microspheres10.1023/A:1007582911958 ↗
66. A simple model framework for the prediction of controlled release from bulk eroding polymer matrices10.1039/b718277e ↗
67. A unified mathematical model for the prediction of controlled release from surface and bulk eroding polymer matrices10.1016/j.biomaterials.2008.12.002 ↗
68. pH and osmotic pressure inside biodegradable microspheres during erosion10.1023/A:1018822002353 ↗