Interfacial behaviour of strontium-containing hydroxyapatite cement with cancellous and cortical bone
Source abstract
Abstract
The bone-bonding behaviors of various biomaterials have been extensively investigated. However, the precise mechanisms of bone bonding have not yet been clarified, and the differences in interfacial behaviors of biomaterial bonding with cancellous bone and cortical bone have not yet been understood. In this study, strontium-containing hydroxyapatite (Sr-HA) cement, in which 10% calcium ions were substituted by strontium, was performed in a rabbit hip replacement model. Six months later, the morphology and chemical composition of interfaces between Sr-HA cement with cancellous bone and cortical bone were evaluated by field emission scanning electron microscopy (FESEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Remarkable differences between these two interfaces were suggested both in morphology and chemical compositions. An apatite layer was found between Sr-HA cement and cancellous bone with a thickness of about 70 microm. However, only a very thin interface (about 1 microm) was formed with cortical bone. As for the cancellous bone/cement interface, high ions intensity of Ca, P, Sr, Na, and O were confirmed by FESEM-EDX and ToF-SIMS. Differences in morphology and chemical component between these two interfaces provided convincing evidences for the proposed dissolution-precipitation coupling mechanism in the formation of biological apatite.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Biomaterials: an interfacial approach
2. The bonding behavior of calcite to bone10.1002/jbm.820250806 ↗
3. Initial interaction of osteoblasts with the surface of a hydroxyapatite-poly(methylmethacrylate) cement10.1016/S0142-9612(00)00334-3 ↗
4. Bioactive bone cement: effect of the amount of glass-ceramic powder on bone-bonding strength10.1002/(SICI)1097-4636(199804)40:1<145::AID-JBM17>3.0.CO;2-N ↗
5. Intercalary replacement of canine femora using a new bioactive bone cement10.1302/0301-620X.78B1.0780026 ↗
6. Prosthetic replacement of the hip in dogs using bioactive bone cement10.1097/00003086-199703000-00035 ↗
7. Evaluation of bioactive bone cement in canine total hip arthroplasty10.1002/(SICI)1097-4636(200002)49:2<273::AID-JBM17>3.0.CO;2-Y ↗
8. Apatite formation on three kinds of bioactive material at an early stage in vivo: a comparative study by transmission electron microscopy10.1002/jbm.820270805 ↗
9. Differences in ceramics–bone interface between surface-active ceramics and resorbable ceramics: a study by scanning and transmission electron microscopy10.1002/jbm.820260210 ↗
10. A comparative study of ultrastructures of the interfaces between four kinds of surface-active ceramics and bone10.1002/jbm.820261103 ↗
11. Bone-bonding behavior of three types of bioactive bone cement containing bioactive glass or glass–ceramic powder
12. Ultrastructure of the interface between bioactive composite and bone: comparison of apatite and wollastonite containing glass–ceramic filler with hydroxyapatite and β-tricalcium phosphate fillers10.1002/1097-4636(200110)57:1<101::AID-JBM1147>3.0.CO;2-G ↗
13. Ultrastructure of ceramic–bone interface using hydroxyapatite and β-tricalcium phosphate ceramics and replacement mechanism of β-tricalcium phosphate in bone10.1016/S0040-8166(03)00067-3 ↗
14. Bone bonding mechanism of β-tricalcium phosphate10.1002/jbm.820251010 ↗
15. Scanning electron microscopy of the bone–bioactive implant interface10.1002/(SICI)1097-4636(19970915)36:4<429::AID-JBM1>3.0.CO;2-G ↗
16. Chemical changes in hydroxyapatite biomaterial under in vivo and in vitro biological conditions10.1007/BF02556656 ↗
17. Formation of carbonate-apatite crystal after implantation of calcium phosphate ceramics10.1007/BF02555820 ↗
18. Ultrastructural comparison of dissolution and apatite precipitation on hydroxyapatite and silicon-substituted hydroxyapatite in vitro and in vivo10.1002/jbm.a.30035 ↗
19. Effect of sintered silicate-substituted hydroxyapatite on remodeling processes at the bone-implant interface10.1016/j.biomaterials.2003.10.006 ↗
20. Effects of strontium ions on growth and dissolution of hydroxyapatite and on bone mineral detection10.1016/S8756-3282(96)00316-X ↗
21. The mechanical properties and solubility of strontium-substituted hydroxyapatite
22. A novel injectable bioactive bone cement for spinal surgery: a development and preclinical study10.1002/1097-4636(200010)52:1<164::AID-JBM21>3.0.CO;2-R ↗
23. Bioactive bone cement as a principal fixture for spinal burst fracture: an in vitro biomechanical and morphologic study10.1097/00007632-200112150-00010 ↗
24. Strengthening mechanism of bone bonding to crystalline hydroxyapatite in vivo10.1016/j.biomaterials.2003.11.017 ↗
25. Black J, Hastings G. Part I: A1, cortical bone and A2, cancellous bone. In: Handbook of biomaterial properties. New York: Chapman & Hall; 1998. p. 3–24.
26. Comparative study of tissue reactions to calcium phosphate ceramics among cancellous, cortical, and medullar bone sites in rabbits10.1002/(SICI)1097-4636(19981205)42:3<357::AID-JBM3>3.0.CO;2-I ↗
27. Strontium-containing hydroxyapatite (Sr-HA) bioactive cement for primary hip replacement: an in vivo study10.1002/jbm.b.30417 ↗
28. Nano-mechanics of bone and bioactive bone cement interfaces in a load bearing model10.1016/j.biomaterials.2005.09.044 ↗
29. Improvement on the visualization of cytoskeletal structures of protozoan parasites using high-resolution field emission scanning electron microscopy (FESEM)
30. The fine structure of fenestrated adrenocortical capillaries revealed by in-lens field-emission scanning electron microscopy and scanning transmission electron microscopy10.1002/sca.4950190503 ↗
31. Chemical gradient in plasma-sprayed HA coatings10.1016/S0142-9612(99)00273-2 ↗
32. Characterization of chemical inhomogeneity in plasma-sprayed hydroxyapatite coatings10.1016/S0142-9612(03)00061-9 ↗
33. TOF-SIMS study of bone mineralization on alkali-treated Ti alloy10.1023/B:JMSC.0000045608.64178.55 ↗
34. Formation and characteristics of the apatite layer on plasma-sprayed hydroxyapatite coatings in simulated body fluid10.1016/S0142-9612(97)00022-7 ↗