Hot embossing for micropatterned cell substrates
Source abstract
Abstract
This paper reports the development of a technique for preparing microtextured polymer substrates for cell growth and studies the response of osteoblast cells grown on these surfaces. The surfaces were manufactured with hot embossing, where a silicon micromachined printing master was pressed into a thermoplastic polymer substrate at elevated temperature, forming a regular microgroove pattern in the polymer. The grooves were approximately 5 microm deep, 4 microm wide, and had a periodicity of 34 microm. The polymer substrate was polyimide, which can be spincast and printed in its uncured form, and is mechanically rigid and chemically nonreactive after full cure. Osteoblast cells were grown on the textured polymer substrate and their responses to grooved and smooth surfaces were observed with fluorescence microscopy. Alignment and aspect ratio were analyzed for the cell body, cell nucleus, and focal adhesions. Cell membrane body, cell nucleus, and focal adhesions all strongly aligned with the microgrooves, while only the cell body shape changed on the microgrooved surface. This novel substrate preparation technique offers the opportunity for low-cost and rapid manufacture of microtextured surfaces that can be used to control cell shape and alignment.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofabrication and Lithography Techniques · Advanced Surface Polishing Techniques · Advancements in Photolithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Imprint lithography with 25-nanometer resolution10.1126/science.272.5258.85 ↗
2. Imprint lithography with sub-10nm feature size and high throughput10.1016/S0167-9317(96)00097-4 ↗
3. Nanoimprint lithography for a large area pattern replication10.1016/S0167-9317(99)00094-5 ↗
4. Nanoscale silicon field effect transistors fabricated using imprint lithography10.1063/1.119426 ↗
5. Nanoscale patterning of magnetic islands by imprint lithography using a flexible mold10.1063/1.1501763 ↗
6. Microfabricated plastic chips by hot embossing methods and their applications for DNA separation and detection10.1016/S0925-4005(00)00745-0 ↗
7. Experiments on cell and axon orientation in vitro10.1002/jez.1401000305 ↗
8. The influence of micro-topography on cellular response and the implications for silicone implants10.1163/156856295X00698 ↗
9. Topographical control of cells10.1016/S0142-9612(97)00144-0 ↗
10. Underlying mechanisms at the bone-biomaterial interface10.1002/jcb.240560310 ↗
11. Behaviour of fibroblast-like cells on grooved surfaces10.1016/S0014-4827(71)80066-6 ↗
12. Effect of titanium surface roughness on proliferation, differentiation, and protein synthesis of human osteoblast-like cells (MG63)10.1002/jbm.820290314 ↗
13. The titanium surface texture effects adherence and growth of human gingival keratinocytes and human maxillar osteoblast-like cells in vitro10.1016/S0142-9612(01)00024-2 ↗
14. Effect of surface processing on the attachment, orientation, and proliferation of human gingival fibroblasts on titanium10.1002/jbm.820261006 ↗
15. Formation of mineralizing osteoblast cultures on machined, titanium oxide grit-blasted, and plasma-sprayed titanium surfaces
16. The cultivation of tissues in extraneous media as a method of morphogenetic study10.1002/ar.1090060404 ↗
17. Effects of synthetic micro-and nano-structured surfaces on cell behavior10.1016/S0142-9612(98)00209-9 ↗
18. Topographical control of cell behaviour10.1242/dev.99.3.439 ↗
19. Topographical control of cell behaviour
20. Macrophage response to microtextured silicone10.1016/0142-9612(92)90138-E ↗
21. The sequence of alignment of microtubules, focal contacts and actin filaments in fibroblasts spreading on smooth and grooved titanium substrata10.1242/jcs.106.1.343 ↗
22. Influence of silicone (PDMS) surface texture on human skin fibroblast proliferation as determined by cell cycle analysis10.1002/(SICI)1097-4636(199821)43:1<1::AID-JBM1>3.0.CO;2-T ↗
23. Alignment and proliferation of MC3T3-E1 osteoblasts in microgrooved silicone substrata subjected to cyclic stretching10.1016/S0021-9290(00)00013-0 ↗
24. Cell adhesion to textured silicone surfaces10.1089/ten.1999.5.223 ↗
25. Contact guidance of rat fibroblasts on various implant materials10.1002/(SICI)1097-4636(199911)47:2<204::AID-JBM10>3.0.CO;2-H ↗
26. Microscale three-dimensional polymeric platforms for in vitro cell culture systems10.1163/156856201753113105 ↗
27. Analysis of connective tissue progenitor cell behavior on polydimethylsiloxane smooth and channel micro-textures10.1023/A:1020950022074 ↗
28. Soft tissue response to microtextured silicone and poly-L-lactic acid implants
29. Microtextured substrata alter gene expression, protein localization and the shape of cardiac myocytes10.1016/S0142-9612(02)00644-0 ↗
30. The attachment and growth behavior of osteoblast-like cells on microtextured surfaces10.1016/S0142-9612(03)00085-1 ↗
31. Fibroblasts on micromachined substrata orient hierarchically to grooves of different dimensions10.1016/0014-4827(86)90450-7 ↗
32. Effects of morphological patterning on endothelial cell migration
33. Microchannel platform for the study of endothelial cell shape and function10.1023/A:1014211627166 ↗
34. Li M, Ai H, Mills D, Lvov Y, McShane M, Gale B. Using microfabrication and electrostatic layer-by-layer (LbL) self-assembly technologies to improve the growth and alignment of smooth muscle cells. Second Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology, Madison, WI, 2002.
35. Grooved titanium surfaces orient growth and migration of cells from human gingival explants10.1177/00220345830620100701 ↗
36. Integrin–fibronectin interactions at the cell-material interface10.1016/S0142-9612(99)00170-2 ↗
37. Micropatterned surfaces to engineer focal adhesions for analysis of cell adhesion strengthening10.1021/la025554p ↗