journal article·2001-02

Preparation and performance of protein-adsorption-resistant asymmetric porous membrane composed of polysulfone/phospholipid polymer blend

Takashi Hasegawa, Yasuhiko Iwasaki, Kazuhiko Ishihara

Biomaterials· Volume 22· Issue 3
Publisher page

Abstract

To obtain protein-adsorption-resistant membrane for hemodialysis, we prepared a polymer blend composed of polysulfone and 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer (PSf/MPC polymer). The content of the MPC polymer in the PSf was 7 and 15 wt%. The asymmetric porous membrane was obtained by the dry/wet membrane processing method. The surface characterization of the PSf/MPC polymer membrane by X-ray photoelectron spectroscopy revealed that the MPC polymer located at the surface. The mechanical strength of the PSf/MPC polymer membrane did not change compared with that of the PSf membrane. On the other hand, the permeability of solute below a molecular weight (Mw) of 2.0 x 10(4) through the PSf membrane increased with the addition of the MPC polymer, which is considered to be an effect of the hydrophilic character of the MPC polymer. The amount of protein adsorbed on the PSf membrane from plasma was reduced by the addition of the MPC polymer. The permeability of low-molecular-weight protein (Mw = 1.2 x 10(4)) did not change even after the PSf/MPC polymer membrane was contacted with plasma protein solution for 4 h, whereas it decreased dramatically in the case of the PSf membrane. Platelet adhesion was also effectively suppressed on the PSf/MPC polymer membrane. Based on these results, the MPC polymer could serve as a doubly functional polymeric additive, that is, to generate a protein-adsorption-resistant characteristic and to render the membrane hydrophilic.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Surface Interaction Studies · Electrospun Nanofibers in Biomedical Applications · Membrane Separation Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Polymer materials for blood purification
2. Preparation of phospholipid polymers and their properties as hydrogel membrane10.1295/polymj.22.355 ↗
3. Preparation of 2-methacryloyloxyethyl phosphorylcholine copolymers with alkyl methacrylates and their blood compatibility10.1295/polymj.24.1259 ↗
4. Reduced thrombogenicity of polymers having phospholipid polar group10.1002/jbm.820240809 ↗
5. Hemocompatibility of polymer having phospholipid polar groups evaluated by monoclonal antibody method10.1016/0142-9612(92)90040-U ↗
6. Hemocompatibility on graft copolymers composed of poly(2-methacryloyloxyethyl phosphorylcholine) side chain and poly(n-butyl methacrylate) backbone10.1002/jbm.820280213 ↗
7. Synthesis of phospholipid polymers having a urethane bond in the side chain as coating material on segmented polyurethane and their platelet adhesion-resistant properties10.1016/0142-9612(95)94150-J ↗
8. Hemocompatibility of human whole blood on polymers with a phospholipid polar group and its mechanism10.1002/jbm.820261202 ↗
9. Phospholipid coating for the prevention of membrane fouling10.1002/jctb.280630112 ↗
10. Improvement of blood compatibility on cellulose dialysis membrane. 1. Grafting of 2-methacryloyloxyethyl phosphorylcholine on to a cellulose membrane surface10.1016/0142-9612(92)90062-S ↗
11. Modification of polysulfone with phospholipid polymer for improvement of the blood compatibility – Part 1
12. Modification of polysulfone with phospholipid polymer for improvement of the blood compatibility – Part 2. Protein adsorption and platelet adhesion10.1016/S0142-9612(98)00206-3 ↗
13. Protein adsorption from human plasma is reduced on phospholipid polymer10.1002/jbm.820251107 ↗
14. Biocompatible surface using methacryloyloxyethylphosphoryl–choline laurylmethacrylate copolymer10.1097/00002480-199407000-00118 ↗
15. Blood-compatible materials based on cell membrane mimicry for intravascular sensors
16. Adhesion and cytokine production by monocytes on poly(2-methacryloyloxyethyl phosphorylcholine-co-alkyl methacrylate)-coated polymers10.1002/jbm.820290403 ↗
17. Surface modified polymer microspheres obtained by the emulsion copolymerization of 2-methacryloyloxyethyl phosphorylcholine with various vinyl monomers10.1295/polymj.26.561 ↗
18. Preparation and biocompatibility of polyetherurethaneureas with poly[2-(methacryloyloxy)ethyl phosphorylcholine-co-butyl methacrylate] side chain10.1295/koron.53.496 ↗
19. Platelet adhesion to novel phospholipid materials: modified phosphatidylcholine covalently immobilized to silica, polypropylene, and PTEFE materials10.1002/(SICI)1097-4636(199610)32:2<237::AID-JBM13>3.0.CO;2-G ↗
20. The effect of surface modification on leukocyte adhesion to polyurethane surface
21. A photochemical method for the surface modification of poly(etherurethanes) with phosphorylcholine-containing compounds to improve hemocompatibility10.1002/(SICI)1097-4636(199711)37:2<282::AID-JBM19>3.0.CO;2-G ↗
22. Cytomimetic biomaterials 1. In situ polymerization of phospholipids on an alkylated surface10.1021/ma970481f ↗
23. Protein adsorption resistible membrane for biosensor composed of polymer with phospholipid polar group10.1002/pola.1992.080300524 ↗
24. Static protein adsorption, ultrafiltration behavior and cleanability of hydrophilized polysulfone membranes10.1016/S0376-7388(99)00028-9 ↗