Protein and bacterial fouling characteristics of peptide and antibody decorated surfaces of PEG-poly(acrylic acid) co-polymers
Source abstract
Abstract
The potential for base poly(ethylene glycol) graft poly(acrylic acid) PEG-g-PA copolymers and surface-modified PEG-g-PA materials to inhibit random protein fouling and bacterial adhesion are investigated. PEG-g-PA co-polymers were synthesized that inhibited non-specific protein and cellular adhesion. PEG-g-PA co-polymers were then covalently modified with either cell adhesion peptides (YRGDS, YEILDV) or fragments of antibodies to monocyte/macrophage integrin receptors (Anti-VLA4, Anti-beta1, Anti-beta2, and Anti-CD64) known to enhance macrophage adhesion and, perhaps, modulate their activation. Materials produced in this work were characterized using: hydrophobicity by contact angle; angle-resolved X-ray Photoelectron Spectroscopy to confirm the presence of PEG in the bulk material and the surface; degree of hydration; differential scanning calorimetry; and thermal gravimetric analysis. To evaluate the non-fouling efficacy of the various modified surfaces, three proteins, human serum albumin, human fibronectin (Fraction I) and human immunoglobulin were 125I labeled. Samples of base PEG-g-PA and PEG-g-PA, modified with various peptides, were exposed to solutions containing either 2 or 200 microg/ml of one of the labeled proteins at 37 degrees C for 24 h. PEG-g-PA substrata modified with directly bound peptides exhibited protein adsorption that varied depending upon the surface bounded peptide. PEG-g-PA modified with peptides linked by linear PEG tethers reduced protein adsorption at 24 h by approximately 45% in comparison to PEG-g-PA. Peptides linked by way of StarPEO and StarlikePEO tethers further decreased protein adsorption in comparison to PEG-g-PA. The ability of peptide:PEOtethers to inhibit protein adsorption appeared to be a function of type and surface coverage of the PEO tether and not influenced by the amount or molecular structure the tethered peptide. Peptides directly coupled to the PEG-g-PA increased the amount of protein fouling relative to controls and there appeared to be some dependency of the amount of protein adsorption on which peptide was tethered. Two 14C-labeled pathogens, Staphylococcus epidermidis and Pseudomonas aeruginosa, were used to quantify the degree of bacterial adhesion using two types of laminar flow cell chambers; one that provided invasive sampling of the target substrata and one that provided non-invasive microscopic surveillance of adhering bacterial cells. Attachment of both species to PEG-g-PA and peptide-modified PEG-g-PA was reduced compared to the basic poly(acrylic acid). Presence of peptides on the surface, whether directly bound or bound by the PEO tether did not influence adhesion of P. aeruginosa relative to controls. S. epidermidis adhesion rates increased slightly for those materials where peptides were directly bound to the surface but were reduced relative to base PEG-g-PA when peptides were bound by PEO tethers. All PEG-g-PA surfaces modified with fragments of monoclonal antibodies dramatically enhanced bacterial initial adhesion rates and maximum extent of attachment.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Surface Interaction Studies · 3D Printing in Biomedical Research · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Bioartificial Organs as Outcomes of Tissue Engineering10.1111/j.1749-6632.1997.tb52179.x ↗
2. New ideas in biomaterials science—a path to engineered biomaterials10.1002/jbm.820270702 ↗
3. Biomaterials in tissue engineering
4. Analysis of phase mixing in aged polymer networks of poly(ethylene glycol) and poly(trimethylolpropane triacrylate)10.1016/0032-3861(95)93122-3 ↗
5. Evaluation of protein-modulated macrophage behavior on biomaterials10.1016/S0142-9612(99)00152-0 ↗
6. Monocyte/macrophage interactions with base and linear- and star-like PEG modified PEG-Poly(acrylic acid) co-polymers10.1002/jbm.a.10516 ↗
7. Wagner V. Modulating macrophage-bacterial interactions at biomaterial interfaces. Ph.D. Dissertation, Department of Chemical Engineering, University of Connecticut, Storrs, CT, 2001.
8. Murine macrophage behavior on peptide-grafted polyethyleneglycol-containing networks10.1002/(SICI)1097-0290(19980705)59:1<2::AID-BIT2>3.0.CO;2-G ↗
9. Human endothelial cell interactions with surface-coupled adhesion peptides on a nonadhesive glass substrate and two polymeric biomaterials10.1002/jbm.820250209 ↗
10. Hermanson · 1996
11. Comparison of tethered star and linear polyethylene oxide) for control of biomaterials surface properties10.1002/(SICI)1097-4636(19980605)40:3<498::AID-JBM21>3.0.CO;2-E ↗
12. Leucocyte adhesion under flow conditions10.1016/0142-9612(96)85572-4 ↗
13. Mechanisms of phagocytosis in macrophages10.1146/annurev.immunol.17.1.593 ↗
14. Resolution of cutaneous inflammation after local elimination of macrophages10.1038/71908 ↗
15. Problems and approaches in covalent attachment of peptides and proteins to inorganic surfaces for biosensor applications10.1007/BF01583997 ↗
16. Radiohalogenation of proteins10.1021/bc00018a001 ↗
17. Fibrinogen mediates acute inflammatory response to biomaterials10.1084/jem.178.6.2147 ↗
18. Surface modification of polymeric biomaterials with poly(ethylene oxide), albumin, and heparin for reduced thrombogenicity10.1163/156856293X00537 ↗
19. Plasma-deposited membranes for the controlled release of antibiotic to prevent bacterial adhesion and biofilm formation10.1002/(SICI)1097-4636(200005)50:2<160::AID-JBM10>3.0.CO;2-M ↗
20. Bryers · 2000
21. Polymer networks with grafted cell adhesion peptides for highly biospecific cell adhesive substrates10.1006/abio.1994.1506 ↗
22. Human serum albumin and fibrinogen interactions with an adsorbed RGD-containing peptide10.1002/(SICI)1097-4636(19990905)46:3<355::AID-JBM7>3.0.CO;2-O ↗
23. Poly(ethylene oxide) grafted to silicon surfaces10.1021/ma971016l ↗
24. Chain dimensions in dilute polymer solutions10.1021/ma00195a058 ↗
25. Pooled human immunoglobulins reduce adhesion of Pseudomonas aeruginosa in a parallel plate flow chamber10.1002/(SICI)1097-4636(200008)51:2<224::AID-JBM11>3.0.CO;2-G ↗
26. Analogies in the two-dimensional spatial arrangement of adsorbed proteins and adhering bacteria10.1163/156856292X00097 ↗
27. Fine particle deposition in laminar flow through parallel-plate and cylindrical channels10.1016/0021-9797(76)90317-9 ↗
28. Jang LK, Yen TF. A theoretical model of convective diffusion of motile and non-motile bacteria toward solid surfaces. In: Zajic N and Donaldson TD, editors. Microbes and oil recovery. Int Bioresour J 1985;1:226–46.
29. Biological responses to polyethylene oxide modified polyethylene terephthalate surfaces10.1002/jbm.820250704 ↗
30. Phase-mixed poly(ethylene glycol)/poly(trimethylolpropane triacrylate) semi-intepenetrating polymer networks obtained by rapid network formation10.1002/pola.1994.080321412 ↗
31. Johnston EE. Surface, biological properties of biofouling-resistant PEO-like plasma deposited films. Ph.D. Dissertation, University of Washington, Seattle, WA, 1997.
32. Effects of cloud-point grafting, chain length, and density of PEG layers on competitive adsorption of ocular proteins10.1016/S0142-9612(01)00334-9 ↗