journal article·2002-03

Using mixed solvent to synthesize temperature sensitive poly(N-isopropylacrylamide) gel with rapid dynamics properties

Xianzheng Zhang, Renxi Zhuo, Yiyan Yang

Biomaterials· Volume 23· Issue 5
Publisher page

Abstract

A novel technique to prepare a fast response poly(N-isopropylacrylamide) (PNIPA) gel is proposed by using water/acetone as a mixed solvent during the polymerization/crosslinking reaction. Gels produced in this way can absorb a large amount of water at room temperature and exhibit rapid response rate as the external temperature gets changed. We suggest that, during the polymerization in the mixed solvent, the polymer chains get widely expanded. which leads to an expanded structure and a large swelling ratio (SR) of the gel in water at room temperature. From the standpoint of entropy, the expanded structure may decrease the total entropy of gel system (including the polymer chains and water molecules around them) at the swollen state, which makes this gel system yearn to collapse and undergo phase separation as the temperature gets increased. On the other hand, due to the macroporous matrix of the expanded gel, the water can diffuse out/in easily and quickly during the shrinking/reswelling process as the temperature cycles around the lower critical solution temperature (LCST).
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogels: synthesis, properties, applications · Advanced Sensor and Energy Harvesting Materials · Advanced Materials and Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Graft copolymers that exhibit temperature-induced phase transitions over a wide range of pH10.1038/373049a0 ↗
2. Polymerized colloidal crystal hydrogel films as intelligent chemical sensing materials10.1038/39834 ↗
3. A reversibly antigen-responsive hydrogel10.1038/21619 ↗
4. Volume phase transition in a nonionic gel10.1063/1.447548 ↗
5. Transfection efficiency increases by incorporating hydrophobic monomer units into polymeric gene carriers10.1016/S0168-3659(00)00246-7 ↗
6. Gene expression control by temperature with thermo-responsive polymeric gene carriers10.1016/S0168-3659(00)00297-2 ↗
7. Thermo-sensitive polymers as on–off switches for drug release10.1002/marc.1987.030081002 ↗
8. Hydrogel microspheres III. Temperature-dependent adsorption of proteins on poly-N-isopropylacrylamide hydrogel microspheres10.1007/BF00656929 ↗
9. Synthesis of thermal phase separating reactive polymers and their applications in immobilized enzymes10.1295/polymj.25.561 ↗
10. Synthesis of fast response, temperature-sensitive poly(N-isopropylacrylamide) gel
11. Synthesis and characterization of thermally reversible macroporous poly(N-isopropylacrylamide) hydrogels10.1002/pola.1992.080301005 ↗
12. Synthesis and characterization of a novel thermosensitive gel with fast response10.1007/s003960050493 ↗
13. Dynamic properties of temperature sensitive poly(N-isopropylacrylamide) gel crosslinked through siloxane linkage10.1021/la000170p ↗
14. Comb-type grafted hydrogels with rapid de-swelling response to temperature changes10.1038/374240a0 ↗
15. Influence of freely mobile grafted chains length on dynamic properties of comb-type grafted poly(N-isopropylacrylamide) hydrogels10.1021/ma00127a018 ↗
16. A novel method to prepare a fast responsive, thermosensitive poly(N-isopropylacrylamide) hydrogel10.1002/(SICI)1521-3927(19990401)20:4<229::AID-MARC229>3.0.CO;2-N ↗
17. Preparation of fast responsive, temperature-sensitive poly(N-isopropylacrylamide) hydrogel10.1002/(SICI)1521-3935(19991201)200:12<2602::AID-MACP2602>3.0.CO;2-T ↗
18. Preparation of fast responsive, thermally sensitive poly(N-isopropylacrylamide) gel10.1016/S0014-3057(99)00297-9 ↗
19. Solution properties of poly(N-isopropylacrylamide)10.1080/10601326808051910 ↗
20. NMR study of poly(N-isopropylacrylamide) gels near phase transition10.1021/ma00010a046 ↗
21. Thermal analysis of the volume phase transition with N-isopropylacrylamide gels10.1021/ma00203a049 ↗
22. Computer experiments on aqueous solution. I. Monte Carlo calculation on the hydration of methanol in an infinitely dilute aqueous solution with a new water–methanol pair potential10.1063/1.444525 ↗
23. Solvent deuteration enhancement of hydrophobicity10.1021/j100173a063 ↗
24. Preparation of films exhibiting a balanced temperature dependence permeatin by aqueous solutions—a study of lower consolute behavior
25. Effect of comonomer hydrophilicity and ionization on the lower critical solution temperature of (N-isopropylacrylamide) copolymers10.1021/ma00062a016 ↗
26. Kinetics of discontinuous volume-phase transition of gels10.1063/1.455115 ↗
27. Preparation pressure dependence of structure inhomogeneities and dynamic fluctuations in poly(N-isopropylacrylamide) gels10.1021/ma001372v ↗
28. Polymer gels that memorize elements of molecular conformation10.1021/ma000603v ↗
29. A new thermo-sensitive hydrogel10.1002/marc.1988.030090312 ↗
30. Sigmoidal swelling profiles for temperature-responsive poly(N-isopropylacrylamide-co-butyl methacrylate) hydrogels10.1016/0376-7388(94)80108-8 ↗
31. Effect of particle size on the mechanism controlling n-hexane sorption in glassy polystyrene microspheres10.1016/0032-3861(77)90183-5 ↗
32. Synthesis of temperature-sensitive poly(N-isopropylacrylamide) hydrogel with improved surface property10.1006/jcis.1999.6654 ↗