journal article·2002-09

In vitro behavior of silicate glass coatings on Ti6Al4V

E Saiz, M Goldman, J.M Gomez-Vega, A.P Tomsia, G.W Marshall, S.J Marshall

Biomaterials· Volume 23· Issue 17
Publisher page

Abstract

The in vitro response in simulated body fluid (SBF) of silicate glass coatings on Ti6A14V was evaluated. Glasses belonging to the SiO2-CaO-MgO-Na2O-K2O-P2O5 system were used to prepare 50-70 m thick coatings on Ti6Al4V, employing a simple enameling technique. Glasses with silica content higher than 55 wt% can be used to prepare coatings that do not crack or delaminate and exhibit good adhesion to the alloy. It has been found that coatings with silica content lower than 60 wt% are more susceptible to corrosion and precipitate carbonated hydroxyapatite on their surface during in vitro tests. However, these coatings have a higher thermal expansion than the metal and are under tension. After 2 months in SBF cracks grow in the coating that reach the glass/metal interface and initiate delamination. Glasses with silica content higher than 60 wt% are more resistant to corrosion and have lower thermal expansion. These coatings do not crack but they do not precipitate apatite even after 2 months in SBF.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Bioactive glass coatings
2. Electrochemistry of AISI-316L stainless steel in calcium phosphate and protein solutions
3. The effect of hydroxyapatite thickness on metal ion release from stainless steel substrates
4. Effect of hydroxyapatite thickness on metal ion release from Ti6Al4V substrates10.1016/0142-9612(96)89655-4 ↗
5. Glass-based coatings for titanium implant alloys10.1002/(SICI)1097-4636(19990915)46:4<549::AID-JBM13>3.0.CO;2-M ↗
6. Silicate glass coatings on Ti-based implants10.1016/S1359-6454(98)80039-6 ↗
7. Bioactive coatings on Ti and Ti6Al4V alloys for medical applications
8. Solution effects on the surface reactions of three bioactive glass compositions10.1002/jbm.820271204 ↗
9. Bioactivity of CaOSiO2-based glasses—In vitro evaluation
10. Preparation, analysis, and characterization of carbonated apatites
11. Formation of calcium phosphate films on silicate glasses10.1016/0022-3093(80)90514-1 ↗
12. Compositional dependence of bioactivity of glasses in the system Na2O–K2O–MgO–CaO–B2O3–P2O5–SiO210.1002/(SICI)1097-4636(199710)37:1<114::AID-JBM14>3.0.CO;2-G ↗
14. Early stages of calcium phosphate layer formation in bioglasses10.1016/0022-3093(89)90011-2 ↗
15. Compositional dependence of calcium phosphate layer formation in fluoride bioglasses10.1002/jbm.820260905 ↗
16. Compositional dependence of the formation of calcium phosphate films on bioglass10.1002/jbm.820140107 ↗
17. NMR investigation of the structure of some bioactive and related glasses10.1016/0022-3093(95)00188-3 ↗
18. An alternative view of the degradation of bioglass10.1007/BF00539955 ↗
19. Analysis of in vitro reaction layers formed on Bioglass(R) using thin- film X-ray diffraction and ATR-FTIR microspectroscopy10.1002/(SICI)1097-4636(199807)41:1<162::AID-JBM19>3.0.CO;2-P ↗
20. Bioceramics—simulated body fluid interfaces—pH and its influence of hydroxyapatite formation
21. Gross U, Kinne R, Schmitz HJ, Strunz V. The response of bone to surface active glass/glass–ceramics. In: Williams DF, editor. CRC critical reviews in biocompatibility. Boca Raton: CRC Press, 1988. p. 2.
22. Bioactivity of CaO SiO2 glasses added with various ions
23. Models for physical properties and bioactivity of phosphate opal glasses
24. Effects of ions in aqueous media on hydroxyapatite induction by silica gel and its relevance to bioactivity of bioactive glasses and glass-ceramics10.1002/jab.770040303 ↗