journal article·2005-12

Biomimetic deposition of apatite coating on surface-modified NiTi alloy

Y.W. Gu, B.Y. Tay, C.S. Lim, M.S. Yong

Biomaterials· Volume 26· Issue 34
Publisher page

Abstract

TiO(2) coatings were prepared on NiTi alloy by heat treatment in air at 300, 400, 600 and 800 degrees C. The heat-treated NiTi alloy was subsequently immersed in a simulated body fluid for the biomimetic deposition of the apatite layer onto the surface of TiO(2) coating. The apatite coatings as well as the surface oxide layer on NiTi alloy were characterized using scanning electron microscopy equipped with energy dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy. Results showed the samples heat-treated at 600 degrees C produced a layer of anatase and rutile TiO(2) on the surface of NiTi. No TiO(2) was detected on the surface of NiTi after heat treatment at 300 and 400 degrees C by X-ray diffraction, while rutile was formed on the surface of the 800 degrees C heat-treated sample. It was found that the 600 degrees C heat-treated NiTi induced a layer consisted of microcrystalline carbonate containing hydroxyapatite on its surface most effectively, while 300 and 400 degrees C heat-treated NiTi did not form apatite. This was due to the presence of anatase and/or rutile in the 600 and 800 degrees C heat-treated NiTi which could provide atomic arrangements in their crystal structures suitable for the epitaxy of apatite crystals, and anatase had better apatite-forming ability than rutile. XPS and Raman results revealed that this apatite layer was a carbonated and non-stoichiometric apatite with Ca/P ratio of 1.53, which was similar to the human bone. The formation of apatite on 600 degrees C heat-treated NiTi following immersion in SBF for 3 days indicated that the surface modified NiTi possessed excellent bioactivity.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Mechanical and X-ray characterization of the assisted two-way shape memory effect in NiTi10.1179/cmq.2000.39.2.217 ↗
2. TiNi shape memory clamps with optimized structure parameters10.1007/BF00123404 ↗
3. Electric resistance phenomena in porous Ni-Ti shape-memory alloys produced by SHS10.1016/S1359-6462(00)00653-9 ↗
4. Behavior of Nitinol in osteoblast-like ROS-17 cell cultures10.1016/S0142-9612(01)00143-0 ↗
5. Characteristics of porous nickel-titanium alloys for medical applications
6. Hard, soft tissue and in vitro cell response to porous nickel-titanium: a biocompatibility evaluation
7. Studies and applications of NiTi shape memory alloys in the medical field in China10.3233/BME-1996-6402 ↗
8. Mechanical properties and shape memory of porous nitinol10.1016/1044-5803(94)90087-6 ↗
9. Study on the formation of an apatite layer on NiTi shape memory alloy using a chemical treatment method10.1016/S0257-8972(03)00733-3 ↗
10. Bone modeling and cell–material interface responses induced by nickel–titanium shape memory alloy after periosteal implantation10.1016/S0142-9612(99)00032-0 ↗
11. Van Humbeeck · 1998 · 73
12. Local induction of calcium phosphate formation on TiO2 coatings on titanium via surface treatment with a CO2 laser10.1002/jbm.a.10434 ↗
13. Preparation and characterization of nanocrystalline calcium phosphate/Al2O3-Ti biocomposite
14. Ti-SiC composite and TiC ceramic layer formation on Ti6Al4V surface by laser alloying of pre-placed SiC coating10.1023/A:1008778013183 ↗
15. Optimising the bioactivity of alkaline-treated titanium alloy10.1016/S0928-4931(02)00022-X ↗
16. Surface oxidation of NiTi shape memory alloy10.1016/S0142-9612(02)00244-2 ↗
18. Solutions able to reproduce in vivo surface structure changes in bioactive glass-ceramic A–W10.1002/jbm.820240607 ↗
19. Ca,P-rich layer formed on high-strength bioactive glass-ceramic A–W10.1002/jbm.820240306 ↗
20. Bonding mechanism of bioactive glass-ceramic A–W to living bone
21. Lee · 1999
22. Synthesis of nanocrystalline TiO2 at 100°C10.1016/j.matlet.2004.02.021 ↗
23. Novel bioactive materials with different mechanical properties10.1016/S0142-9612(03)00044-9 ↗
24. A comparative study of in vitro apatite deposition on heat-, H2O2-, and NaOH-treated titanium surfaces
25. Structural dependence of apatite formation on titania gels in a simulated body fluid10.1002/jbm.a.10414 ↗
26. Analysis of surface layers on bioactive glasses10.1016/0142-9612(94)90044-2 ↗
27. Characterization of surface oxide films on titanium and bioactivity10.1023/A:1014737831371 ↗
28. Osteoclast adhesion and activity synthetic hydroxyapatite, carbonated hydroxyapatite, and natural calcium carbonate: Relationship to surface energies10.1002/(SICI)1097-4636(199905)45:2<140::AID-JBM9>3.0.CO;2-I ↗