Mechanical evaluation of implanted calcium phosphate cement incorporated with PLGA microparticles
Source abstract
Abstract
In this study, the mechanical properties of an implanted calcium phosphate (CaP) cement incorporated with 20wt% poly (dl-lactic-co-glycolic acid) (PLGA) microparticles were investigated in a rat cranial defect. After 2, 4 and 8 weeks of implantation, implants were evaluated mechanically (push-out test) and morphologically (Scanning Electron Microscopy (SEM) and histology). The results of the push-out test showed that after 2 weeks the shear strength of the implants was 0.44+/-0.44MPa (average+/-sd), which increased to 1.34+/-1.05MPa at 4 weeks and finally resulted in 2.60+/-2.78MPa at 8 weeks. SEM examination showed a fracture plane at the bone-cement interface at 2 weeks, while the 4- and 8-week specimens created a fracture plane into the CaP/PLGA composites, indicating an increased strength of the bone-cement interface. Histological evaluation revealed that the two weeks implantation period resulted in minimal bone ingrowth, while at 4 weeks of implantation the peripheral PLGA microparticles were degraded and replaced by deposition of newly formed bone. Finally, after 8 weeks of implantation the degradation of the PLGA microparticles was almost completed, which was observed by the bone ingrowth throughout the CaP/PLGA composites. On basis of our results, we conclude that the shear strength of the bone-cement interface increased over time due to bone ingrowth into the CaP/PLGA composites. Although the bone-cement contact could be optimized with an injectable CaP cement to enhance bone ingrowth, still the mechanical properties of the composites after 8 weeks of implantation are insufficient for load-bearing purposes.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Periodontal Regeneration and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Orbital floor reconstruction using calcium phosphate cement paste: an animal study10.1097/01.PRS.0000143579.68771.55 ↗
2. Injectable calcium phosphate cement for bone repair and implant fixation10.1016/j.ocl.2004.06.014 ↗
3. Injectable calcium-phosphate bone cement (Norian) for reconstruction of a large mandibular defect: a case report10.1016/j.joms.2002.12.005 ↗
4. Enhancement of initial stability of press-fit femoral stems using injectable calcium phosphate cement: an in vitro study in dog bones10.1016/j.biomaterials.2003.10.067 ↗
5. In vivo behavior of three different injectable hydraulic calcium phosphate cements10.1016/j.biomaterials.2003.08.073 ↗
6. Evaluation of an injectable calcium phosphate cement as an autograft substitute for transpedicular lumbar interbody fusion: a controlled, prospective study in the sheep model10.1007/s00586-002-0471-1 ↗
7. An injectable calcium phosphate cement as a bone-graft substitute in the treatment of displaced lateral tibial plateau fractures10.1016/S0020-1383(02)00105-5 ↗
8. Injectable calcium phosphate cement as a filler for bone defects around oral implants: an experimental study in goats10.1034/j.1600-0501.2002.130311.x ↗
9. Augmentation of femoral neck fracture fixation with an injectable calcium–phosphate bone mineral cement10.1002/jor.1100140516 ↗
10. In vivo bone response to porous calcium phosphate cement10.1002/jbm.a.10432 ↗
11. Engineering structurally organized cartilage and bone tissues10.1023/B:ABME.0000007799.60142.78 ↗
12. In vitro modeling of the bone/implant interface10.1002/(SICI)1097-0185(199606)245:2<426::AID-AR21>3.0.CO;2-Q ↗
13. Preliminary report on the biocompatibility of a moldable, resorbable, composite bone graft consisting of calcium phosphate cement and poly(lactide-co-glycolide) microspheres10.1016/S0736-0266(01)00140-1 ↗
14. Biocompatibility and degradation of poly(dl-lactic-co-glycolic acid)/calcium phosphate cement composites10.1002/jbm.a.30341 ↗
15. rhBMP-2 release from injectable poly(dl-lactic-co-glycolic acid)/calcium–phosphate cement composites10.2106/00004623-200300003-00013 ↗
16. Biodegradation and biocompatibility of PLA and PLGA microspheres10.1016/S0169-409X(97)00048-3 ↗
17. Novel polymer-synthesized ceramic composite-based system for bone repair: an in vitro evaluation10.1002/jbm.a.30051 ↗
18. Synergistic reinforcement of in situ hardening calcium phosphate composite scaffold for bone tissue engineering10.1016/S0142-9612(03)00608-2 ↗
19. Self-hardening calcium phosphate cement–mesh composite: reinforcement, macropores, and cell response10.1002/jbm.a.20124 ↗
20. Self-hardening calcium phosphate composite scaffold for bone tissue engineering
21. Preparation and characterization of a highly macroporous biodegradable composite tissue engineering scaffold10.1002/jbm.a.30173 ↗
22. Development and cell response of a new biodegradable composite scaffold for guided bone regeneration10.1023/B:JMSM.0000021113.88702.9d ↗
23. Biological response to pre-mineralized starch based scaffolds for bone tissue engineering10.1007/s10856-005-6689-9 ↗
24. Fast setting calcium phosphate–chitosan scaffold: mechanical properties and biocompatibility10.1016/j.biomaterials.2004.04.043 ↗
25. Injectable biodegradable materials for orthopedic tissue engineering10.1016/S0142-9612(00)00108-3 ↗
26. Osteoinduction in porous hydroxyapatite implanted in heterotopic sites of different animal models10.1016/0142-9612(96)80752-6 ↗
27. Implantation of recombinant human bone morphogenetic proteins with biomaterial carriers: a correlation between protein pharmacokinetics and osteoinduction in the rat ectopic model10.1002/(SICI)1097-4636(200005)50:2<227::AID-JBM18>3.0.CO;2-2 ↗
28. Regulation of bone cell function by acid–base balance10.1079/PNS2003268 ↗
29. Viable bone formation in porous hydroxyapatite: marrow cell-derived in vitro bone on the surface of ceramics
30. Reaction of bone to HA, carbonate-HA, hydroxyapatite+calcium orthophosphate and to hydroxyapatite+calcium ortho- and pyrophosphate
31. Mechanical strength of calcium phosphate cement in vivo and in vitro10.1016/S0142-9612(97)00121-X ↗
32. Influence of the in vitro culture period on the in vivo performance of cell/titanium bone tissue-engineered constructs using a rat cranial critical size defect model10.1002/jbm.a.10126 ↗
33. In vivo evaluation of gene therapy vectors in ex vivo-derived marrow stromal cells for bone regeneration in a rat critical-size calvarial defect model10.1089/104303403322611719 ↗
34. A finite element analysis of the push-out test: influence of test conditions10.1002/jbm.820260111 ↗
35. A mechanical investigation of fluorapatite, magnesiumwhitlockite, and hydroxylapatite plasma-sprayed coatings in goats10.1002/jbm.820251002 ↗
36. Habraken WJEM, Wolke JGC, Mikos AG, Jansen JA. Injectable PLGA microsphere/calcium phosphate cements: physical properties and degradation characteristics. J Biomater Sci Polym Ed, accepted for publication.
37. Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone10.1016/0142-9612(96)85762-0 ↗
38. Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress10.1016/0142-9612(95)98272-G ↗
39. Properties of osteoconductive biomaterials: calcium phosphates
40. Theoretical model to determine the effects of geometrical factors on the resorption of calcium phosphate bone substitutes10.1016/j.biomaterials.2003.10.032 ↗
41. Pore diameter of more than 100μm is not requisite for bone ingrowth in rabbits10.1002/jbm.1069 ↗
42. Biomechanical and histological evaluation of a calcium phosphate cement10.2106/00004623-199808000-00004 ↗
43. Trabecular bone response to injectable calcium phosphate (Ca-P) cement10.1002/jbm.10029 ↗
44. Histological evaluation of the bone response to calcium phosphate cement implanted in cortical bone10.1016/S0142-9612(02)00438-6 ↗
45. Resorbable calcium phosphate bone substitute10.1002/(SICI)1097-4636(199824)43:4<399::AID-JBM7>3.0.CO;2-J ↗