Electrical conductivity of poly(vinyl chloride) filled with PAN-based and pitch-based carbon short-fibers 1
Source abstract
Abstract
Poly(vinyl chloride) (PVC) was filled with PAN-based and pitch-based carbon and graphite short-fibers with up to 100 phr (volume fraction Φf = 0.39-0.45) by roll mixing. Carbon short-fibers were aligned in the roll direction although some fibers were broken during roll mixture. Volumetric electrical conductivities (σ) were measured for these sheets by the square four-point probe method and the two terminal method. The conductivities increased as Φf and the fiber length increased. The conductivities of specimens filled with graphite fiber were larger than those filled with carbon fibers. The larger Φf, the smaller the influence of the specimen length on σ. In order to improve mechanical properties of the materials, the influence of the coupling agent for carbon short-fibers on electrical conductivities was investigated. Since the short-fibers were covered by the coupling agent, the electrical conductivity of the filled material was lowered. The influence of orientation of short-fibers on σ was clearly detected by the two terminal method, but anisotropy was not detected by the square four-point probe method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer crystallization and properties · Recycling and Waste Management Techniques · Polymer Science and PVC
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Tanaka K. · Kobunshi Ronbunshu · 1980 · 37 · 57510.1295/koron.37.575 ↗
2. Tanaka K. · Kobunshi Ronbunshu · 1984 · 41 · 32310.1295/koron.41.323 ↗
3. Tanaka K. · Kobunshi Ronbunshu · 1988 · 45 · 90310.1295/koron.45.903 ↗
4. Tanaka K. · J. Jpn Soc. Compos. Mater. · 1990 · 16 · 5310.6089/jscm.16.53 ↗
5. Tanaka K. · Adv. Compos. Mater. · 1992 · 2 · 8510.1163/156855192X00134 ↗
6. Jana P. B. · J. Mater. Sci. · 1992 · 32 · 448
7. Polley M. H. · Rubb. Chem. Tech. · 1957 · 30 · 17010.5254/1.3542660 ↗
8. Miyasaka K. · J. Mater. Sci. · 1982 · 17 · 161010.1007/BF00540785 ↗
9. Sumita M. · Kobunshi Ronbunshu · 1983 · 40 · 20310.1295/koron.40.203 ↗
10. Sumita M. · Colloid Polym. Sci. · 1986 · 264 · 21210.1007/BF01414955 ↗
11. Pramanik P. K. · J. Mater. Sci. · 1990 · 25 · 384810.1007/BF00582450 ↗
12. Sumita M. · Polym. Bull. · 1991 · 25 · 26510.1007/BF00310802 ↗
13. Gurland J. · Trans. Metal. Sci. AIME · 1966 · 236 · 642
14. Malliaris A. · J. Appl. Phys. · 1971 · 42 · 61410.1063/1.1660071 ↗
15. Mukhopadhyay R. · J. Appl. Polym. Sci. · 1976 · 20 · 257410.1002/app.1976.070200927 ↗
16. . Nagata K. · Kobunshi Ronbunshu · 1992 · 49 · 67710.1295/koron.49.677 ↗
17. Maeda ?. · Kobunshi Ronbunshu · 1975 · 32 · 4210.1295/koron.32.42 ↗
18. Yamaki J. · E. C. L. Tech. J. NTT Jpn · 1977 · 26 · 1159
19. Yamashita M. · Jpn J. Appl. Phys. · 1984 · 23 · 149910.1143/JJAP.23.1499 ↗
20. Yamashita M. · Jpn J. Appl. Phys. · 1986 · 25 · 56310.1143/JJAP.25.563 ↗
21. Funabashi, M. and Kitano, T. Moulding of short-fiber filled epoxy resin composites using centrifugal force. Proceedings of the 67th Annual Meeting of Japan Society of Mechanical Engineering. pp.245–247.
22. Saito S. · Kobunshi High Polym. Japan · 1968 · 17 · 67210.1295/kobunshi.17.672 ↗
23. Matsuda S. · Chem. Ind. · 1982 · 46 · 148
24. Sakaguchi Y. · Chem. Ind. · 1982 · 46 · 153