journal article·2008-01

Microscopic Evaluation and Analysis on the Tensile Strength of Hybridized Reinforcement Filament Yarns by the Commingling Process

Chathura Nalendra Herath, Bok Choon Kang, Beong Bok Hwang, Kyung Ho Min, Jung Min Seo, In Chul Lee, Jayasekara Vishara Ruchiranga, Joong Yeon Lim

Advanced Composite Materials· Volume 17· Issue 3
Publisher page

Abstract

The analysis in this paper is focused on the pattern of mixing of filaments over a cross-section of hybrid yarns according to different combinations of reinforcement and matrix filament yarns through microscopic view. The volume content of filament in hybrid yarn cross-section was maintained at 50% for both reinforcement and matrix, and the hybrid yarns count at 600 tex throughout the experiments. It was observed from the experiments that diameters of reinforcement and matrix filaments have strong effects particularly on the pattern of mixing of filaments over a cross-section of hybrid yarns such that the hybrid yarns with more or less equal diameters of reinforcement and matrix filaments showed considerably even distributions over the hybrid yarn cross-section. This paper also investigates the possibility of hybridizing carbon/aramid, carbon/glass and aramid/glass matrices through the commingling process. In the experiment, several process parameters were selected and they include pressure, yarn oversupply-rate and different nozzle types. As a result of these experiments, it was concluded that the hybridized materials show better performance than individual reinforced filament yarns in terms of mechanical properties. For small tensile forces, the carbon/glass/matrix combination turned out to be good enough for general purpose applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Mallick P. K. · 1993
2. Ashbee K. H. G. · 1987
3. Flemming M. · 199510.1007/978-3-642-57776-5 ↗
4. Lauke B. · J. Composites Part A · 1998 · 29 · 139710.1016/S1359-835X(98)00059-1 ↗
5. Herath C. N. · 2000
6. Choi B. D. · Technical Textiles · 2002 · 45 · 16
7. Choi, B. D., Diestel, O., Offermann, P., Maeder, E. and Huebner, T. Modifizierte Lufttechturiertechnik zur Herstellung fadenförmiger Halbzeuger für endlosfaserverstärkte Thermoplaste. Proc. 10th Techtextil Sympos. pp.1–6. Germany: Messe Frankfurt.
8. Choi, B. D., Diestel, O. and Offermann, P. Commingled carbon/PEEK hybrid yarns for use in textile reinforced high performance rotors. Proc. 12th Intl Conf. Compos.Mater.—ICCM—12. Paris, UK. pp.796–806.
9. Chaudhuri R. A. · J. Compos. Mater. · 1995 · 29 · 169510.1177/002199839502901302 ↗
10. Ehrenstein G. W. · 1992