journal article·2010-08

Towards ultraporous poly(l-lactide) scaffolds from quaternary immiscible polymer blends

N. Virgilio, P. Sarazin, B.D. Favis

Biomaterials· Volume 31· Issue 22
Publisher page

Abstract

Ultraporous poly(l-lactide) (PLLA) scaffolds were prepared by melt-processing quaternary ethylene propylene diene rubber/poly(epsilon-caprolactone)/polystyrene/poly(l-lactide) (EPDM/PCL/PS/PLLA) 45/45/5/5 %vol. polymer blends modified with a PS-b-PLLA diblock copolymer. The morphology consists of a PS+PLLA+copolymer sub-blend layer forming at the interface of the EPDM and PCL phases. Quiescent annealing and interfacial modification using the block copolymer are used to control the blend microstructure. The ultraporous structure is subsequently obtained by selectively extracting the EPDM, PS and PCL phases. The PLLA scaffolds modified with the PS-b-PLLA copolymer present themselves as fully interconnected porous networks with asymmetric channel walls, one side being smooth while the other is covered with an array of submicron-sized PLLA droplets. They are prepared with a high degree of control over the pore size, with averages ranging from 5microm to over 100microm and a specific surface from 9.1 to 23.1m(2)/g of PLLA, as annealing is carried out from 0 to 60min. The void volume reaches values as high as 95% and in all cases the shape and dimensions of the scaffolds are maintained with a high level of integrity. The proposed method represents a comprehensive approach towards the design and generation of porous PLLA scaffolds based on complex morphologies from melt-processed multiphase polymer systems.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials · Chemical Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. From material to tissue: biomaterial development, scaffold fabrication, and tissue engineering10.1002/aic.11610 ↗
2. The design of scaffolds for use in tissue engineering. Part1. Traditional factors10.1089/107632701753337645 ↗
3. Biomimetic materials for tissue engineering10.1016/j.addr.2007.08.041 ↗
4. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
5. Controlled preparation and properties of porous poly(l-lactide) obtained from a co-continuous blend of two biodegradable polymers10.1016/j.biomaterials.2004.01.065 ↗
6. Morphology control in co-continuous poly(l-lactide)/polystyrene blends: a route towards highly structured and interconnected porosity in poly(l-lactide) materials10.1021/bm030034+ ↗
7. Influence of the porous morphology on the in vitro degradation and mechanical properties of poly(l-lactide) disks10.1002/app.23185 ↗
8. Macroporous poly(l-lactide) of controlled pore size derived from the annealing of co-continuous polystyrene/poly(l-lactide) blends10.1016/j.biomaterials.2003.08.060 ↗
9. Favis BD, Sarazin P, Li J; Yuan Z. US. Patent Appl, 10/552,357 and WIPO (PCT) WO 2004/087797; 2004.
10. Ultraporous nanosheath materials by layer-by-layer deposition onto co-continuous polymer-blend templates10.1002/adma.200501210 ↗
11. Roy X, Sarazin P, Favis BD. U.S. Patent Appl., 12/093,712 and WIPO (PCT) WO 2007/053955; 2007.
12. Three-phase interactions in shear and electrical fields10.1016/0021-9797(70)90073-1 ↗
13. Prediction and manipulation of the phase morphologies of multiphase polymer blends: 1. Ternary systems10.1016/S0032-3861(96)00571-X ↗
14. Core-shell structure and segregation effects in composite droplet polymer blends10.1002/aic.690490418 ↗
15. Factors influencing encapsulation behavior in composite droplet-type polymer blends10.1016/S0032-3861(02)00684-5 ↗
16. Control of the subinclusion microstructure in HDPE/PS/PMMA ternary blends10.1021/ma991954g ↗
17. Ultralow percolation thresholds in ternary cocontinuous polymer blends10.1021/ma0716480 ↗
18. Dependence of phase morphology and mechanical properties of PS/SBR/PE ternary blends on composition: transition from core-shell to triple-phase continuity structures10.1016/S0032-3861(99)00514-5 ↗
19. Morphology development through an interfacial reaction in ternary immiscible polymer blends10.1021/ma9615258 ↗
20. Novel self-assembling close-packed droplet array at the interface in ternary polymer blends10.1021/ma802544q ↗
21. In situ measure of interfacial tensions in ternary and quaternary immiscible polymer blends demonstrating partial wetting10.1021/ma9005507 ↗
22. High contrast imaging of interphases in ternary polymer blends using focused ion beam preparation and atomic force microscopy10.1021/ma0482664 ↗
23. Co-continuous and encapsulated three phase morphologies in uncompatibilized and reactively compatibilized polyamide 6/polypropylene/polystyrene ternary blends using two reactive precursors10.1016/j.polymer.2005.10.022 ↗
24. On the instability of a cylindrical thread of a viscous liquid surrounded by another viscous fluid
25. Interfacial tension reduction and coalescence suppression in compatibilized polymer blends10.1002/aic.690450419 ↗
26. In situ compatibilization of PS/EPDM blends during ultrasonic extrusion10.1002/macp.200500311 ↗
27. Stability of the co-continuous morphology during melt mixing for poly(ε-caprolactone)/polystyrene blends10.1002/polb.21078 ↗
28. Sarazin, P. Substrats Poreux Biodégradables Préparés à partir de Phases Co-Continues dans les Mélanges de Polymères Immiscibles. Ph.D. thesis, École Polytechnique de Montréal: Montréal; 2003.
29. Role of block copolymer on suppression of droplet coalescence10.1021/ma020754t ↗
30. Drop breakup and coalescence in polymer blends: the effects of concentration and compatibilization10.1021/ma00112a009 ↗
31. Hudson · 1999