journal article·2026-07-04

Influence of CuO and NiO additives on the microstructure and properties of SiCp/Al composites fabricated by pressureless infiltration

Ahmed Tijjani Murtala, Dehong Lu

Advanced Composite Materials· Volume 35· Issue 4
Publisher page

Abstract

Silicon carbide particles reinforced aluminum matrix composites (SiCp/Al) with CuO and NiO additives were prepared by pressureless infiltration in air atmosphere using Al-12Si-8 Mg aluminum alloy. The influence of CuO and NiO added to the SiC preforms on the infiltration, microstructure and thermo-mechanical properties of the obtained composites was studied. Results indicate that the enormous heat generated during the exothermic reactions between CuO, NiO and molten Al rises the melt infiltration temperature, lowers the molten aluminium fluidity and helps to accelerate the infiltration process. Compared to samples without CuO and NiO addition, the addition of CuO and NiO to the SiC performs result in shorter incubation period and infiltration time, improving the microstructure, thermal and mechanical properties of the composites. No harmful and brittle aluminum carbide (Al4C3) phase was discovered at the interfacial area of all the composite samples. However, generation of thick and stable Al2O3 layer at the surface of SiC particles for SiCp/Al composites with NiO impedes infiltration rate, subsequently affecting the composites overall thermo-mechanical properties compared to the SiCp/Al composites with CuO addition. The required interfaces can be obtained with CuO addition as shown by their better microstructure and excellent properties. SiC particles were distributed uniformly and exhibit a good interface bonding with the aluminum alloy. SiCp/Al composites with CuO addition result in shorter incubation period, infiltration time and enhanced properties compared with NiO added composites. The composite properties are: a coefficient of thermal expansion (RT to 473 K) of 7.95 × 10−6 K−1, a thermal conductivity of 251.31 W/(mK), and a bending strength of 356.86 MPa.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Kunming University of Science and Technology

National-Local Joint Engineering Research Center for Technology of Advanced Metallic Solidification Forming and Equipment

Funding

Yunnan Province Science and Technology Department · National Natural Science Foundation of China

References (70)

Show source-provided references
1. 10.1016/S1003-6326(11)61334-410.1016/S1003-6326(11)61334-4 ↗
2. 10.1016/j.mtphys.2021.10059410.1016/j.mtphys.2021.100594 ↗
3. 10.1016/j.progpolymsci.2016.05.00110.1016/j.progpolymsci.2016.05.001 ↗
4. 10.1016/j.coco.2020.10052810.1016/j.coco.2020.100528 ↗
5. 10.1016/j.matdes.2015.11.03310.1016/j.matdes.2015.11.033 ↗
6. 10.1016/j.matchar.2008.01.01210.1016/j.matchar.2008.01.012 ↗
7. 10.1016/S1003-6326(21)65521-810.1016/S1003-6326(21)65521-8 ↗
8. 10.1016/j.msea.2015.06.02710.1016/j.msea.2015.06.027 ↗
9. 10.1016/B0-08-042993-9/00125-X10.1016/B0-08-042993-9/00125-X ↗
10. 10.1016/j.cossms.2006.02.00510.1016/j.cossms.2006.02.005 ↗
11. 10.1016/j.compscitech.2005.04.02510.1016/j.compscitech.2005.04.025 ↗
12. 10.1016/S1359-6462(02)00095-710.1016/S1359-6462(02)00095-7 ↗
13. 10.1007/BF0115930910.1007/BF01159309 ↗
14. 10.1016/j.ceramint.2011.04.13010.1016/j.ceramint.2011.04.130 ↗
15. 10.1007/s11249-011-9819-110.1007/s11249-011-9819-1 ↗
16. 10.1007/s11837-001-0139-z10.1007/s11837-001-0139-z ↗
17. 10.1007/BF0035455910.1007/BF00354559 ↗
18. Geiger AL, Jackson MJAM. Low-expansion MMCs boost avionics Advanced Materials and Process. 1989;136(1):23–30.
19. 10.1002/pssa.20042002210.1002/pssa.200420022 ↗
20. 10.1080/00150193.2020.176243210.1080/00150193.2020.1762432 ↗
21. 10.1016/j.matdes.2009.03.00910.1016/j.matdes.2009.03.009 ↗
22. 10.1007/BF0060917210.1007/BF00609172 ↗
23. 10.1007/s12598-010-0182-410.1007/s12598-010-0182-4 ↗
24. 10.1016/j.scriptamat.2004.08.02810.1016/j.scriptamat.2004.08.028 ↗
25. 10.1016/j.carbon.2015.01.01010.1016/j.carbon.2015.01.010 ↗
26. Sun Y, She XW, Tang BB, et al. Microstructure and mechanical properties of spray co-deposition SiC p/7090Al composite after solution treatment. Jinshu Rechuli/Heat Treat Met. 2011;36:60–64.
27. 10.1016/S1003-6326(21)65574-710.1016/S1003-6326(21)65574-7 ↗
28. 10.1016/j.ceramint.2008.10.02410.1016/j.ceramint.2008.10.024 ↗
29. 10.1016/j.jallcom.2009.04.07410.1016/j.jallcom.2009.04.074 ↗
30. 10.1016/j.compscitech.2005.07.02510.1016/j.compscitech.2005.07.025 ↗
31. 10.1016/j.compositesa.2009.10.00110.1016/j.compositesa.2009.10.001 ↗
32. 10.1163/156855196X0010310.1163/156855196X00103 ↗
33. 10.1016/j.powtec.2007.02.00810.1016/j.powtec.2007.02.008 ↗
34. 10.1016/S0924-0136(01)00975-X10.1016/S0924-0136(01)00975-X ↗
35. 10.1179/1743284712Y.000000015210.1179/1743284712Y.0000000152 ↗
36. Kosolapova TY. Carbides: properties, production, and applications. Springer Science & Business Media; 2012.
37. 10.1016/S1359-6462(97)00133-410.1016/S1359-6462(97)00133-4 ↗
38. 10.1080/09243046.2017.140559610.1080/09243046.2017.1405596 ↗
39. 10.1016/S1359-6454(97)00265-610.1016/S1359-6454(97)00265-6 ↗
40. 10.1016/j.ceramint.2012.11.08210.1016/j.ceramint.2012.11.082 ↗
41. 10.1016/j.ceramint.2018.03.01610.1016/j.ceramint.2018.03.016 ↗
42. 10.1023/A:100475830580110.1023/A:1004758305801 ↗
43. 10.1007/BF0238561310.1007/BF02385613 ↗
44. 10.1016/j.ceramint.2019.10.21610.1016/j.ceramint.2019.10.216 ↗
45. 10.1007/BF0335546910.1007/BF03355469 ↗
46. 10.3390/ma1707160810.3390/ma17071608 ↗
47. 10.1007/BF0281201410.1007/BF02812014 ↗
48. 10.1016/S0167-577X(02)01142-410.1016/S0167-577X(02)01142-4 ↗
49. 10.1007/BF0322227010.1007/BF03222270 ↗
50. 10.1016/S0025-5408(96)00150-X10.1016/S0025-5408(96)00150-X ↗
51. 10.1088/1757-899X/225/1/01226510.1088/1757-899X/225/1/012265 ↗
52. 10.1016/0956-7151(95)00004-F10.1016/0956-7151(95)00004-F ↗
53. 10.1016/j.apsusc.2021.15127210.1016/j.apsusc.2021.151272 ↗
54. 10.1016/j.cplett.2017.09.06610.1016/j.cplett.2017.09.066 ↗
55. 10.1016/j.ceramint.2019.09.04010.1016/j.ceramint.2019.09.040 ↗
56. 10.1016/j.ceramint.2016.10.10410.1016/j.ceramint.2016.10.104 ↗
57. 10.1007/s00231-017-2073-910.1007/s00231-017-2073-9 ↗
58. 10.1016/j.matdes.2011.04.03210.1016/j.matdes.2011.04.032 ↗
59. 10.1016/j.matdes.2015.11.02810.1016/j.matdes.2015.11.028 ↗
60. 10.1007/s12540-016-5454-610.1007/s12540-016-5454-6 ↗
61. 10.1016/j.matdes.2013.06.05610.1016/j.matdes.2013.06.056 ↗
62. 10.1063/1.35930210.1063/1.359302 ↗
63. 10.1103/RevModPhys.61.60510.1103/RevModPhys.61.605 ↗
64. 10.1016/S1875-5372(15)30066-710.1016/S1875-5372(15)30066-7 ↗
65. 10.1016/B978-0-08-036984-6.50010-710.1016/B978-0-08-036984-6.50010-7 ↗
66. 10.1080/10408436.2023.222357310.1080/10408436.2023.2223573 ↗
67. 10.1016/j.jallcom.2019.05.31710.1016/j.jallcom.2019.05.317 ↗
68. 10.1016/S1003-6326(16)64358-310.1016/S1003-6326(16)64358-3 ↗
69. 10.1016/j.msea.2010.07.04310.1016/j.msea.2010.07.043 ↗
70. 10.1016/j.msea.2015.09.02710.1016/j.msea.2015.09.027 ↗