Layer-wise compaction 3D printing: void reduction and interfacial enhancement for continuous carbon fiber–reinforced thermoplastics
Source abstract
Abstract
This study incorporated a heating roller into a 3D printer based on fused filament fabrication to develop a layer-wise compaction 3D printer. The heating roller facilitates heat compaction during 3D printing to reduce voids and enhance the interface. Coupon specimens were 3D-printed using a continuous carbon fiber-reinforced nylon composite, and the effects of the process on the microstructure and mechanical properties were analyzed. The porosity was measured using X-ray computed tomography, which demonstrated an effective reduction due to the heat-compaction process. The enhanced mode-I interlaminar fracture toughness was assessed using a double-cantilever beam test. The reduced voids and improved interface led to enhanced bending properties of the composite. The bending fracture surface exhibited a reduced compression failure area as a result of the heat compaction process, indicating an improvement in the compression load-bearing capacity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nihon University
Yamato University
Tokyo University of Science
University of Bretagne Sud
Funding
Adaptable and Seamless Technology Transfer Program through Target-Driven R and D
References (32)
Show source-provided references
1. 10.4236/ojcm.2016.6100310.4236/ojcm.2016.61003 ↗
2. 10.1016/j.compositesb.2022.10962610.1016/j.compositesb.2022.109626 ↗
3. 10.1016/j.compositesb.2023.11057210.1016/j.compositesb.2023.110572 ↗
4. 10.1016/j.compscitech.2018.05.03210.1016/j.compscitech.2018.05.032 ↗
5. 10.1016/j.compositesa.2019.03.02010.1016/j.compositesa.2019.03.020 ↗
6. 10.1080/09243046.2019.165032310.1080/09243046.2019.1650323 ↗
7. 10.1080/09243046.2021.193049710.1080/09243046.2021.1930497 ↗
8. 10.1016/j.addma.2018.04.03910.1016/j.addma.2018.04.039 ↗
9. 10.1016/j.jmrt.2021.10.10810.1016/j.jmrt.2021.10.108 ↗
10. 10.1080/09243046.2023.226023310.1080/09243046.2023.2260233 ↗
11. 10.1016/j.addma.2020.10177510.1016/j.addma.2020.101775 ↗
12. 10.1080/09243046.2017.136884010.1080/09243046.2017.1368840 ↗
13. 10.1016/j.addma.2020.10163410.1016/j.addma.2020.101634 ↗
14. 10.1016/j.compositesa.2021.10653210.1016/j.compositesa.2021.106532 ↗
15. 10.1002/app.5333010.1002/app.53330 ↗
16. 10.1016/j.jmatprotec.2017.04.02710.1016/j.jmatprotec.2017.04.027 ↗
17. 10.1016/j.addma.2019.10092210.1016/j.addma.2019.100922 ↗
18. 10.1002/pc.2529410.1002/pc.25294 ↗
19. Omuro R, Ueda M, Matsuzaki R, et al. Mechanical testing of a 3D-printed continuous carbon fiber reinforced polylactic acid composite by in-nozzle impregnation fused-deposition modelling. Sampe J. 2018;54(5):12–20.
20. 10.1016/j.compositesa.2020.10598510.1016/j.compositesa.2020.105985 ↗
21. 10.3390/ma1302047110.3390/ma13020471 ↗
22. 10.1016/j.addma.2022.10277310.1016/j.addma.2022.102773 ↗
23. 10.1177/2634983323115839510.1177/26349833231158395 ↗
24. 10.1016/j.compositesa.2023.10756210.1016/j.compositesa.2023.107562 ↗
25. 10.3390/polym1417347110.3390/polym14173471 ↗
26. 10.1016/j.matdes.2017.10.02110.1016/j.matdes.2017.10.021 ↗
27. 10.3390/polym1403050610.3390/polym14030506 ↗
28. Markforged material data sheet REV 5.2–1/20/2022 [internet]. Available from: https://markforged.com/jp/datasheets
29. RepRap [Internet]. RepRap. [cited 2025 Jan 10].Available from: https://reprap.org
30. 10.1080/20550340.2019.171002310.1080/20550340.2019.1710023 ↗
31. 10.1108/RPJ-08-2018-019210.1108/RPJ-08-2018-0192 ↗
32. 10.1007/s10973-015-4670-510.1007/s10973-015-4670-5 ↗