In-situ engineered three-dimensional hydrogen-bonded co-binder network to boost lithium–sulfur batteries
Source abstract
Abstract
The development of cathodes with high sulfur loading is essential for practical high-energy lithium–sulfur batteries. The binder functions as a polymeric framework that integrates active materials and conductive agents, while preserving electrode integrity and influencing electrochemical behavior. In lithium–sulfur systems, binders with polar functional groups that interact strongly with lithium polysulfides are crucial to suppress the shuttle effect and enhance cycling stability. Here, we design a multifunctional binder, poly(amic acid)–dextrin copolymer (PDB), which incorporates amide, carboxyl, hydroxyl, and imide groups within a three-dimensional network. This architecture provides mechanical robustness, immobilizes polysulfides, accelerates redox kinetics, and improves interfacial contact among electrode components. As a result, lithium–sulfur cells with PDB deliver a specific capacity of 590 mAh g− 1 after 100 cycles at 0.5 C, and maintain 357 mAh g− 1 under a high sulfur loading of 9.0 mg cm− 2 after 100 cycles at 0.2 C. This work demonstrates that multifunctional binder systems play a pivotal role in advancing lithium–sulfur batteries toward scalable, high-performance, and cost-effective energy storage technologies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Emrani A, Berrada A (2024) A comprehensive review on techno-economic assessment of hybrid energy storage systems integrated with renewable energy. J Energy Storage 84:111010. https://doi.org/10.1016/j.est.2024.11101010.1016/j.est.2024.111010 ↗
2. Elalfy DA, Gouda E, Kotb MF, Bureš V, Sedhom BE (2024) Comprehensive review of energy storage systems technologies, objectives, challenges, and future trends. Energy Strategy Rev 54:101482. https://doi.org/10.1016/j.esr.2024.10148210.1016/j.esr.2024.101482 ↗
3. Liu Y, Li M, Zabrian D, Baek DH, Kim HW, Kim JK, Ahn JH (2025) Elevating lithium and sodium storage performance through the synergistic integration of ZnS and sulfurized polyacrylonitrile hybrid anode materials. Energy Environ Mater 8:e70001. https://doi.org/10.1002/eem2.7000110.1002/eem2.70001 ↗
4. Nathan MGT, Yeon SY, Lee JS, Jo MS, Hwang GC, Kim HI, Wu F, Kim GT, Liu Y, Kim JH, Cho JS, Kim JK (2024) Yolk-shell vanadium pentoxide integrated electrode for high-performance stretchable lithium metal battery. J Energy Storage 98:113047. https://doi.org/10.1016/j.est.2024.11304710.1016/j.est.2024.113047 ↗
5. Fan C, Yang R, Huang Y, Mao L, Yang Y, Gong L, Dong X, Yan Y, Zou Y, Zhong L, Xu Y (2023) Graphene quantum dots as sulfiphilic and lithiophilic mediator toward high stability and durable life lithium-sulfur batteries. J Energy Chem 85:254–266. https://doi.org/10.1016/j.jechem.2023.06.03010.1016/j.jechem.2023.06.030 ↗
6. Nguyen VP, Qureshi Y, Shim HC, Yuk JM, Kim JH, Lee SM (2024) Intercalation-conversion hybrid cathode enabled by MXene-driven TiO2/TiS2 heterostructure for high-energy-density Li-S battery. Small Struct 5:2400196. https://doi.org/10.1002/sstr.20240019610.1002/sstr.202400196 ↗
7. Saroha R, Ka HS, Park GD, Cho C, Kang DW, Cho JS (2024) Long-term stability of lithium-sulfur batteries via synergistic integration of nitrogen-doped graphitic carbon-coated cobalt selenide nanocrystals within porous three-dimensional graphene-carbon nanotube microspheres. J Power Sources 592:233893. https://doi.org/10.1016/j.jpowsour.2023.23389310.1016/j.jpowsour.2023.233893 ↗
8. Wang R, Ma C, Li C, Zhang W, Zhang C, Wang J, Xiao L, Lv B, Guo S, Yao S (2025) Keggin-type potassium phosphotungstate modified functionalization of carbon nanotubes hybrid materials for capture and boost conversion of polysulfides in lithium sulfur batteries. J Energy Storage 109:115168. https://doi.org/10.1016/j.est.2024.11516810.1016/j.est.2024.115168 ↗
9. Lan Y, Wang Y, Wang Y, Lu G, Liu L, Tang T, Li M, Cheng Y, Xiao J, Li X (2024) Chip-inspired design of high-performance lithium-sulfur batteries by integrating monodisperse sulfur nanoreactors on graphene. ACS Nano 18:15638–15650. https://doi.org/10.1021/acsnano.4c0126410.1021/acsnano.4c01264 ↗
10. Liu Y, Lee DJ, Cho KK, Zou Y, Ahn HJ, Ahn JH (2023) Promoting long cycle life with honeycomb-like tri-modal porous carbon for stable lithium-sulfur polymer batteries. J Alloys Compd 932:167704. https://doi.org/10.1016/j.jallcom.2022.16770410.1016/j.jallcom.2022.167704 ↗
11. Razaq R, Din MMU, Småbråten DR, Eyupoglu V, Janakiram S, Sunde TO, Allahgoli N, Rettenwander D, Deng L (2024) Synergistic effect of bimetallic MOF modified separator for long cycle life lithium-sulfur batteries. Adv Energy Mater 14:2302897. https://doi.org/10.1002/aenm.20230289710.1002/aenm.202302897 ↗
12. Li J, Wu X, Jian C, Qiao X, Wan F, Wu Z, Zhong B, Chen Y, Guo X (2024) GO-CoNiP new composite material modified separator for long cycle lithium-sulfur batteries. Small 20:2307912. https://doi.org/10.1002/smll.20230791210.1002/smll.202307912 ↗
13. Liu Y, Meng Q, Yang R, Zou Y, Li M, Kim HW, Kim JK, Ahn JH (2025) Anchoring polysulfides with ternary Fe3O4/graphitic carbon/porous carbon fiber hierarchical structures for high-rate lithium-sulfur batteries. J Energy Storage 105:114591. https://doi.org/10.1016/j.est.2024.11459110.1016/j.est.2024.114591 ↗
14. Zuo X, Zhen M, Liu D, Fu L, Qiu Y, Liu H, Zhang Y (2024) Hollow and porous N-doped carbon framework as lithium-sulfur battery interlayer for accelerating polysulfide redox kinetics. Adv Funct Mater 34:2405486. https://doi.org/10.1002/adfm.20240548610.1002/adfm.202405486 ↗
15. Liu Y, Han J, Baek DH, Kim HW, Ahn JH, Kim JK (2024) Unlocking high-energy solid-state lithium-sulfur batteries with an innovative double-layer hybrid solid electrolyte. Chem Eng J 496:153647. https://doi.org/10.1016/j.cej.2024.15364710.1016/j.cej.2024.153647 ↗
16. Li Z, Yang ZJ, Moloney J, Yu CP, Chhowalla M (2024) Quasi-solid-state electrolyte induced by metallic MoS2 for lithium-sulfur batteries. ACS Nano 18:16041–16050. https://doi.org/10.1021/acsnano.4c0500210.1021/acsnano.4c05002 ↗
17. Ma D, Wen Y, Lin X, Li J, Zhu Z, Wang S, Liu H, Xu X (2025) Covalent and non-covalent cross-linked based polymer binders for high-sulfur-loading lithium-sulfur batteries. Chem Eng J 511:162095. https://doi.org/10.1016/j.cej.2025.16209510.1016/j.cej.2025.162095 ↗
18. Wen Y, Lin X, Sun X, Wang S, Wang J, Liu H, Xu X (2024) A biomass-rich, self-healable, and high-adhesive polymer binder for advanced lithium-sulfur batteries. J Colloid Interface Sci 660:647–656. https://doi.org/10.1016/j.jcis.2024.01.09210.1016/j.jcis.2024.01.092 ↗
19. Hou M, Liu J, Yu F, Wang L (2023) A ductile and strong-affinity network binder coupling inorganic oligomers and biopolymers for high-loading lithium-sulfur batteries. Dalton Trans 52:7602–7610. https://doi.org/10.1039/D3DT00550J10.1039/D3DT00550J ↗
20. Huang Y, Shaibani M, Gamot TD, Wang M, Jovanovic P, Cooray MCD, Mirshekarloo MS, Mulder RJ, Medhekar NV, Hill MR, Majumder M (2021) A saccharide-based binder for efficient polysulfide regulations in Li-S batteries. Nat Commun 12:5375. https://doi.org/10.1038/s41467-021-25612-510.1038/s41467-021-25612-5 ↗
21. Zhao G, Zhang R, Xu G, Jin S (2019) Poly(amic acid) lithium salt as a multi-functional binder for high performance lithium/sulfur battery cathodes. Int J Electrochem Sci 14:8772–8780. https://doi.org/10.20964/2019.09.1110.20964/2019.09.11 ↗
22. Hernández G, Lago N, Shanmukaraj D, Armand M, Mecerreyes D (2017) Polyimide-polyether binders-diminishing the carbon content in lithium-sulfur batteries. Mater Today Energy 6:264–270. https://doi.org/10.1016/j.mtener.2017.11.00110.1016/j.mtener.2017.11.001 ↗
23. Ren X, Sun Q, Zhu Y, Sun W, Li Y, Lu L (2020) Unveiling the role of hydroxyl architecture on polysulfide trapping for high-performance lithium-sulfur batteries. ACS Appl Energy Mater 3:4023–4032. https://doi.org/10.1021/acsaem.0c0044410.1021/acsaem.0c00444 ↗
24. Iqbal A, Khalid N, Siddiqi HM, Park OO, Akhter T (2018) 4-quinolin-8-yloxy linked triphenylamine based polyimides: blue light emissive and potential hole-transport materials. J Fluoresc 28:311–321. https://doi.org/10.1007/s10895-017-2193-010.1007/s10895-017-2193-0 ↗
25. Tohry A, Dehghan R, Hatefi P, Chelgani SC (2021) A comparative study between the adsorption mechanisms of sodium co-silicate and conventional depressants for the reverse anionic hematite flotation. Sep Sci Technol 57:1–18. https://doi.org/10.1080/01496395.2021.188789310.1080/01496395.2021.1887893 ↗
26. Ahmad MB, Gharayebi Y, Salit MS, Hussein MZ, Shameli K (2011) Comparison of in situ polymerization and solution-dispersion techniques in the preparation of polyimide/montmorillonite (MMT) nanocomposites. Int J Mol Sci 12:6040–6050. https://doi.org/10.3390/ijms1209604010.3390/ijms12096040 ↗
27. Hu M, Zhou J, Jiang L, Wang Z, Bao Y, Cui S (2025) Correlation between hydrogen bond strength and temperature: a quantitative single-molecule study over a broad temperature range. J Phys Chem B 129:4547–4557. https://doi.org/10.1021/acs.jpcb.5c0096210.1021/acs.jpcb.5c00962 ↗
28. Zhang Y, Mushtaq N, Fang X, Chen G (2022) In situ FTIR analysis for the determination of imidization degree of polyimide precursors. Polymer 238:124416. https://doi.org/10.1016/j.polymer.2021.12441610.1016/j.polymer.2021.124416 ↗
29. Ansari Y, Zhang S, Wen B, Fan F, Chiang YM (2019) Stabilizing Li-S battery through multilayer encapsulation of sulfur. Adv Energy Mater 9:1802213. https://doi.org/10.1002/aenm.20180221310.1002/aenm.201802213 ↗
30. Liu Y, Lee DJ, Ahn HJ, Nam SY, Cho KK, Ahn JH (2023) Waste coffee grounds-derived carbon: nanoarchitectured pore-structure regulation for sustainable room-temperature sodium-sulfur batteries. Renew Energy 212:865–874. https://doi.org/10.1016/j.renene.2023.05.10510.1016/j.renene.2023.05.105 ↗
31. Zhao X, Liu Y, Manuel J, Chauhan GS, Ahn HJ, Kim KW, Cho KK, Ahn JH (2015) Nitrogen-doped mesoporous carbon: a top-down strategy to promote sulfur immobilization for lithium-sulfur batteries. ChemSusChem 8:3234–3241. https://doi.org/10.1002/cssc.20150074110.1002/cssc.201500741 ↗
32. She ZW, Wang H, Hsu PC, Zhang Q, Li W, Zheng G, Yao H, Cui Y (2014) Facile synthesis of Li2S-polypyrrole composite structures for high-performance Li2S cathodes. Energy Environ Sci 7:672–676. https://doi.org/10.1039/C3EE43395A10.1039/C3EE43395A ↗
33. Hou TZ, Xu WT, Chen X, Peng HJ, Huang JQ, Zhang Q (2017) Lithium bond chemistry in lithium-sulfur batteries. Angew Chem Int Ed 129:8290–8294. https://doi.org/10.1002/anie.20170432410.1002/anie.201704324 ↗
34. Liu Y, Ju HC, Cho KK, Ahn HJ, Ahn JH (2023) Grape-cluster-like hierarchical structure of FeS2 encapsulated in graphitic carbon as cathode material for high-rate lithium batteries. Appl Surf Sci 630:157458. https://doi.org/10.1016/j.apsusc.2023.15745810.1016/j.apsusc.2023.157458 ↗
35. Lu W, Cong L, Liu Y, Liu J, Mauger A, Julien CM, Sun L, Xie H (2020) Pseudocapacitance controlled fast-charging and long-life lithium-ion battery achieved via a 3D mutually embedded VPO4/rGO electrode. J Alloys Compd 812:152135. https://doi.org/10.1016/j.jallcom.2019.15213510.1016/j.jallcom.2019.152135 ↗
36. He Y, Zhou F, Zhang Y, Lv T, Chu P, Huo K (2025) High-toughness and hierarchical stress0dissipating binder based on physicochemical dual-cross-linking for high-performance silicon anodes. ACS Appl Mater Interfaces 17:21206–21214. https://doi.org/10.1021/acsami.4c2269610.1021/acsami.4c22696 ↗
37. Hua W, Li H, Pei C, Xia J, Sun Y, Zhang C, Lv W, Tao Y, Jiao Y, Zhang B, Qiao SZ, Wan Y, Yang QH (2021) Selective catalysis remedies polysulfide shuttling in lithium-sulfur batteries. Adv Mater 33:2101006. https://doi.org/10.1002/adma.20210100610.1002/adma.202101006 ↗
38. Lang S, Yu SH, Feng X, Krumov MR, Abruña HD (2022) Understanding the lithium-sulfur battery redox reactions via operando confocal Raman microscopy. Nat Commun 13:4811. https://doi.org/10.1038/s41467-022-32139-w10.1038/s41467-022-32139-w ↗