Pulsed light sintering of silver nanoparticles for large deformation of printed stretchable electronics
Source abstract
Abstract
Growth of printed electronics has increased the interest in the nanoparticle inks. Research on flexible electronics has expanded not only due to inherent benefits of producing flexible products but also for its high-throughput manufacturability, such as roll-to-toll (R2R) process. Conventional sintering methods cause microcracks and voids in the sintered nanoink film, which lead to subpar performance, and are not suitable for the high-throughput R2R production. Furthermore, these methods are incompatible with many polymer substrates used in flexible electronics due to their low thermal budget. In this study, we present an alternative method utilizing an intense pulsed light (IPL) with a xenon flash lamp to sinter silver nanoink on a polymer substrate. The IPL method is capable of selectively sintering the silver nanoink in milliseconds without damaging the polymer substrates. The silver nanoink was stencil printed on a polydimethylsiloxane (PDMS) specimen. Samples were prepared using five different sintering conditions and tested under uniaxial strain. Three IPL sintering conditions were compared against a non-sintered (NS) and an oven-sintered (OS) conditions. The IPL-sintered samples show a significant improvement in tensile test over NS and OS samples. Samples sintered at 20 J/cm2 of flash energy density and 10 ms of duration were stretched up to 27% strain before losing electrical conductivity. Scanning electron microscopy (SEM) confirms these results showing a reduction in porosity of the sintered nanoink as compared to NS and OS samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Zenou M et al (2014) Laser sintering of copper nanoparticles. J Phys D Appl Phys 47(2):02550110.1088/0022-3727/47/2/025501 ↗
2. Li Y, Wu Y, Ong BS (2005) Facile synthesis of silver nanoparticles useful for fabrication of high-conductivity elements for printed electronics. J Am Chem Soc 127(10):3266–326710.1021/ja043425k ↗
3. Singh M et al (2010) Inkjet printing—process and its applications. Adv Mater 22(6):673–68510.1002/adma.200901141 ↗
4. Lyu H et al (2016) Carbon composite spun fibers with in situ formed multicomponent nanoparticles for a lithium-ion battery anode with enhanced performance. J Mater Chem A 4(25):9881–988910.1039/C6TA02083F ↗
5. Mizukami M et al (2006) Flexible AM OLED panel driven by bottom-contact OTFTs. IEEE Electron Device Letters 27(4):249–25110.1109/LED.2006.870413 ↗
6. Cheng Y-J, Yang S-H, Hsu C-S (2009) Synthesis of conjugated polymers for organic solar cell applications. Chem Rev 109(11):5868–592310.1021/cr900182s ↗
7. Lin YY et al (1997) Stacked pentacene layer organic thin-film transistors with improved characteristics. IEEE Electron Device Letters 18(12):606–60810.1109/55.644085 ↗
8. Hasegawa T, Takeya J (2009) Organic field-effect transistors using single crystals. Sci Technol Adv Mater 10(2):02431410.1088/1468-6996/10/2/024314 ↗
9. Choi D et al (2016) Micro-capacitor with vertically grown silver nanowires and bismuth ferric oxide composite structures on silicon substrates. J Compos Mater. https://doi.org/10.1177/002199831665676710.1177/0021998316656767 ↗
10. Dasgupta S et al (2011) Inkjet printed, high mobility inorganic-oxide field effect transistors processed at room temperature. ACS Nano 5(12):9628–963810.1021/nn202992v ↗
11. Homenick CM et al (2016) Fully printed and encapsulated SWCNT-based thin film transistors via a combination of R2R gravure and inkjet printing. ACS Appl Mater Interfaces 8(41):27900–2791010.1021/acsami.6b06838 ↗
12. Liu J et al (2011) Nanoparticle dispersion and aggregation in polymer nanocomposites: insights from molecular dynamics simulation. Langmuir 27(12):7926–793310.1021/la201073m ↗
13. Vaillancourt J et al (2008) All ink-jet-printed carbon nanotube thin-film transistor on a polyimide substrate with an ultrahigh operating frequency of over 5 GHz. Appl Phys Lett 93(24):24330110.1063/1.3043682 ↗
14. Capasso A et al (2015) Ink-jet printing of graphene for flexible electronics: an environmentally-friendly approach. Solid State Commun 224:53–6310.1016/j.ssc.2015.08.011 ↗
15. Lee H-H, Chou K-S, Huang K-C (2005) Inkjet printing of nanosized silver colloids. Nanotechnology 16(10):243610.1088/0957-4484/16/10/074 ↗
16. Kim H-S et al (2009) Intense pulsed light sintering of copper nanoink for printed electronics. Applied Physics A 97(4):791–79810.1007/s00339-009-5360-6 ↗
17. Secor EB et al (2014) Gravure printing of graphene for large-area flexible electronics. Adv Mater 26(26):4533–453810.1002/adma.201401052 ↗
18. Parashkov R et al (2005) Large area electronics using printing methods. Proc IEEE 93(7):1321–132910.1109/JPROC.2005.850304 ↗
19. Chikae M et al (2006) Direct fabrication of catalytic metal nanoparticles onto the surface of a screen-printed carbon electrode. Electrochem Commun 8(8):1375–138010.1016/j.elecom.2006.06.019 ↗
20. Kang JS et al (2011) Sintering of inkjet-printed silver nanoparticles at room temperature using intense pulsed light. J Electron Mater 40(11):2268–227710.1007/s11664-011-1711-0 ↗
21. Ryu J, Kim H-S, Hahn HT (2010) Reactive sintering of copper nanoparticles using intense pulsed light for printed electronics. J Electron Mater 40(1):42–5010.1007/s11664-010-1384-0 ↗
22. Ko SH et al (2007) All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles. Nanotechnology 18(34):34520210.1088/0957-4484/18/34/345202 ↗
23. Ryu J et al (2010) Intense pulsed light induced platinum–gold alloy formation on carbon nanotubes for non-enzymatic glucose detection. Biosens Bioelectron 26(2):602–60710.1016/j.bios.2010.07.021 ↗
24. Ryu J et al (2010) Carbon nanotubes with platinum nano-islands as glucose biofuel cell electrodes. Biosens Bioelectron 25(7):1603–160810.1016/j.bios.2009.11.019 ↗
25. Kim J et al (2016) Reinforcement of Cu nanoink sintered film with extended carbon nanofibers for large deformation of printed electronics. J Compos Mater 51(7):997–100310.1177/0021998316656394 ↗
26. Qi L, Ma J, Shen J (1997) Synthesis of copper nanoparticles in nonionic water-in-oil microemulsions. J Colloid Interface Sci 186(2):498–50010.1006/jcis.1996.4647 ↗
27. Greer JR, Street RA (2007) Mechanical characterization of solution-derived nanoparticle silver ink thin films. J Appl Phys 101(10):10352910.1063/1.2735404 ↗
28. Wiria FE et al (2007) Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering. Acta Biomater 3(1):1–1210.1016/j.actbio.2006.07.008 ↗
29. Kim D, Moon J (2005) Highly conductive ink jet printed films of nanosilver particles for printable electronics. Electrochem Solid-State Lett 8(11):J3010.1149/1.2073670 ↗
30. Wang T et al (2007) Low-temperature sintering with nano-silver paste in die-attached interconnection. J Electron Mater 36(10):1333–134010.1007/s11664-007-0230-5 ↗
31. Green S, Grant D, Kelly N (1997) Powder metallurgical processing of Ni–Ti shape memory alloy. Powder Metall 40(1):43–4710.1179/pom.1997.40.1.43 ↗
32. Kang J et al (2010) Inkjet printed electronics using copper nanoparticle ink. J Mater Sci Mater Electron 21(11):1213–122010.1007/s10854-009-0049-3 ↗
33. Zhang H et al (2006) Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content. Acta Mater 54(7):1833–184210.1016/j.actamat.2005.12.009 ↗
34. Han W-S et al (2011) Multi-pulsed white light sintering of printed Cu nanoinks. Nanotechnology 22(39):39570510.1088/0957-4484/22/39/395705 ↗
35. Kang H, Sowade E, Baumann RR (2014) Direct intense pulsed light sintering of inkjet-printed copper oxide layers within six milliseconds. ACS Appl Mater Interfaces 6(3):1682–168710.1021/am404581b ↗
36. Wünscher S et al (2014) Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices. J Mater Chem C 2(48):10232–1026110.1039/C4TC01820F ↗