journal article·2025-10Open access

Tribo-driven evolution of specific nano-heterostructures to achieve exceptional wear resistance in composites

Shuai Yang, Siyang Gao, Weihai Xue, Bi Wu, Deli Duan

Abstract

A novel NiAlTa/cBN composite produced by spark plasma sintering exhibited exceptional wear resistance, which is attributed to the tribo-layers with special nano-heterostructures. At room temperature, an extremely low wear rate (10−7 mm3·N−1·m−1) and a low coefficient of friction (0.252) of the composite were attributed to the nanoscale amorphous tribo-layer. Amorphization was synergistically controlled by the solid-state amorphization and oxidation processes. The amorphous tribo-layer accommodated the sliding-induced elastic–plastic deformation and virtually eliminated wear. At high temperatures, the plastic incompatibility and strain localization of the subsurface nanocrystalline layer increased the wear rate. The formation of an amorphous tribo-oxide layer and oxidative cleaving effect reduced the fracture toughness of cBN particles and increased the tendency of crack nucleation and growth. Multiple deformation pathways synergistically increased the microplastic deformability of cBN particles and reduced the wear rate. Ta3N5 nanoparticles generated by tribo-chemical reactions played a load-supporting and stress-transferring role in sliding wear. A strategy to achieve exceptional wear resistance by regulating the evolution of specific nano-heterostructures on the composite surfaces was proposed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Lou M et al (2021) Temperature–induced wear transition in ceramic–metal composites. Acta Mater 205:11654510.1016/j.actamat.2020.116545 ↗
2. Cheng Q et al (2022) Microstructure evolution and wear mechanism of in situ prepared Ti–TiN cermet layers at high temperature. Compos Part B-Eng 242:11002810.1016/j.compositesb.2022.110028 ↗
3. Liu YD et al (2021) Microstructural evolution and mechanical properties of NiCrAlYSi+ NiAl/cBN abrasive coating coated superalloy during cyclic oxidation. J Mater Sci Technol 71:44–5410.1016/j.jmst.2020.08.043 ↗
4. Davenport JR et al (2014) Material needs for turbine sealing at high temperature. Mater Sci Tech 30:1877–188310.1179/1743284714Y.0000000527 ↗
5. Luo ZC et al (2019) Microstructure and wear properties of TiC–strengthened high–manganese steel matrix composites fabricated by hypereutectic solidification. Wear 432:20297010.1016/j.wear.2019.202970 ↗
6. Onuoha CC et al (2016) The effects of TiC grain size and steel binder content on the reciprocating wear behaviour of TiC–316L stainless steel cermets. Wear 350:116–12910.1016/j.wear.2016.01.008 ↗
7. Yi YL et al (2021) Influence of Al2O3 particles on the tribological properties of CoCrAlYTa coating produced by laser–induction hybrid cladding. Ceram Int 47:19434–1944210.1016/j.ceramint.2021.03.280 ↗
8. Yang S et al (2023) Investigations on microstructure, oxidation, and tribological behavior of NiCoCrAlYTa/Y2O3 blade tip protective coating produced by electro spark deposition over a wide temperature range. Tribol Int 180:10827410.1016/j.triboint.2023.108274 ↗
9. Lou M et al (2023) Achieving exceptional wear resistance in cemented carbides using B2 intermetallic binders. Compos Part B-Eng 249:11040010.1016/j.compositesb.2022.110400 ↗
10. Hu W et al (2018) Microstructural characterization and mechanical properties of a novel TiC–based cermet bonded with Ni3(Al, Ti) and NiAl duplexalloy. Mater Charact 135:295–30210.1016/j.matchar.2017.11.003 ↗
11. Feng KL et al (2021) The evolution mechanism of tribo–oxide layer during high temperature dry sliding wear for nickel–based superalloy. Wear 476:20374710.1016/j.wear.2021.203747 ↗
12. Hou G et al (2015) Effect of alumina dispersion on oxidation behavior as well as friction and wear behavior of HVOF–sprayed CoCrAlYTaCSi coating at elevated temperature up to 1000 °C. Acta Mater 95:164–17510.1016/j.actamat.2015.05.025 ↗
13. Stott FH et al (1973) The structure and mechanism of formation of the “glaze” oxide layers produced on nickel–based alloys during wear at high temperatures. Corros Sci 13:449–46910.1016/0010-938X(73)90030-9 ↗
14. Stott FH et al (1987) The sliding wear of in–situ formed oxides on iron and nickel–base alloys. In Corrosion–Erosion of Materials at Elevated Temperatures. pp. 263–277. Published by The National Association of Corrosion Engineers, Houston, Texas.
15. Stott FH et al (1983) The influence of oxides in high temperature wear. In High Temperature Corrosion. pp. 406–412. Published by The National Association of Corrosion Engineers, Houston, Texas.
16. Liang F et al (2023) A novel wear–resistant Ni–based superalloy via high Cr–induced subsurface nanotwins and heterogeneous composite glaze layer at elevated temperatures. Tribol Int 183:10838310.1016/j.triboint.2023.108383 ↗
17. Ren Y et al (2024) Wear–resistant CoCrNi multi–principal element alloy at cryogenic temperature. Sci Bull 69:227–23610.1016/j.scib.2023.12.003 ↗
18. Chen X et al (2020) Friction of stable gradient nano–grained metals. Scripta Mater 185:82–8710.1016/j.scriptamat.2020.04.041 ↗
19. Bolelli G et al (2020) Performance of wear resistant MCrAlY coatings with oxide dispersion strengthening. Wear 444:20311610.1016/j.wear.2019.203116 ↗
20. Lewis D et al (1969) Plastic deformation in tungsten carbide. J Appl Crystallogr 2:249–25210.1107/S0021889869007151 ↗
21. Yang S et al (2025) Oxidation, hot corrosion, and interdiffusion behavior of NiAlTa coating by electro–spark deposition. Rare Met 44:4988–500410.1007/s12598-024-03218-2 ↗
22. Yang S et al (2025) Evolution of nanocrystalline “glaze” layers and subsurfaces ultrafine grain layer in high–temperature sliding wear. Friction 13:9441107. https://doi.org/10.26599/FRICT.2025.944110710.26599/FRICT.2025.9441107 ↗
23. Yang S et al (2023) Microstructural evolution and elemental interdiffusion behaviour near the interface of NiAlTa alloy and single crystal superalloy DD5 at 1000 °C, 1050 °C, and 1100 °C. Surf Coat Tech 473:13003510.1016/j.surfcoat.2023.130035 ↗
24. Garshin AP et al (1992) Mechanism of oxidation of β–BN. Sov powder metall Met Ceram 31:656–66110.1007/BF00797809 ↗
25. Dub SN et al (2017) Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride. J Superhard Mater 39:88–9810.3103/S1063457617020034 ↗
26. Archard JF (1953) Contact and rubbing of flat surfaces. J Appl Phys 24:981–98810.1063/1.1721448 ↗
27. Jeong D (2003) Abrasive wear behaviour of electrodeposited nanocrystalline materials. Diss. University of Toronto.
28. Dao M et al (2007) Toward a quantitative understanding of mechanical behavior of nanocrystalline metals. Acta Mater 55:4041–406510.1016/j.actamat.2007.01.038 ↗
29. Cheng JB et al (2013) Devitrification of arc–sprayed febsinb amorphous coatings: effects on wear resistance and mechanical behavior. Surf Coat Tech 235:720–72610.1016/j.surfcoat.2013.08.054 ↗
30. Yang S et al (2023) Structural design and high temperature tribological behavior of a new turbine blade tip protective coating. Surf Coat Tech 457:12931610.1016/j.surfcoat.2023.129316 ↗
31. Meng J et al (2024) Impact of gradient microstructure on strain hardening via activation of multiple deformation mechanisms in CoCrNi medium entropy alloy. Mater Futures 3:04100210.1088/2752-5724/ad86d2 ↗
32. Hamilton GM (1983) Explicit equations for the stresses beneath a sliding spherical contact. Proc Inst Mech Eng C J Mech Eng Sci 197:53–59
33. Shetty DK et al (1985) Indentation fracture of WC–Co cermets. J Mater Sci 20:1873–188210.1007/BF00555296 ↗
34. Rau JS et al (2021) High diffusivity pathways govern massively enhanced oxidation during tribological sliding. Acta Mater 221:11735310.1016/j.actamat.2021.117353 ↗
35. Jiang J et al (1998) The role of triboparticulates in dry sliding wear. Tribol Int 31:245–25610.1016/S0301-679X(98)00027-9 ↗
36. Erdemir A (2000) A crystal–chemical approach to lubrication by solid oxides. Tribol Lett 8:97–10210.1023/A:1019183101329 ↗
37. Geng Y et al (2023) Remarkable wear resistance in a complex concentrated alloy with nanohierarchical architecture and composition undulation. Research 6:016010.34133/research.0160 ↗
38. Sachdev H et al (1997) Investigation of the c–BN/h–BN phase transformation at normal pressure. Diam Relat Mater 6:286–29210.1016/S0925-9635(96)00697-8 ↗
39. Yin C et al (2019) Formation of a self–lubricating layer by oxidation and solid–state amorphization of nano–lamellar microstructures during dry sliding wear tests. Acta Mater 166:208–22010.1016/j.actamat.2018.12.049 ↗
40. Liu C et al (2021) Reactive wear protection through strong and deformable oxide nanocomposite surfaces. Nat Commun 12:551810.1038/s41467-021-25778-y ↗
41. Ding ZH et al (2006) Raman scattering investigation of nanocrystalline δ–TiNx synthesized by solid–state reaction. J Alloy Compd 421:247–25110.1016/j.jallcom.2005.11.017 ↗
42. Stavrev M et al (1997) Crystallographic and morphological characterization of reactively sputtered Ta, TaN and TaNO thin films. Thin Solid Films 307:79–8810.1016/S0040-6090(97)00319-2 ↗
43. Hansen N (2004) Hall–Petch relation and boundary strengthening. Scripta Mater 51:801–80610.1016/j.scriptamat.2004.06.002 ↗
44. Chen X et al (2018) Microstructure evolution and deformation mechanisms during high rate and cryogenic sliding of copper. Acta Mater 161:138–14910.1016/j.actamat.2018.09.016 ↗
45. Wang C et al (2025) Resolving electrochemically triggered topological defect dynamics and structural degradation in layered oxides. P Natl Acad Sci 122:e240949412210.1073/pnas.2409494122 ↗
46. Hu GX et al (2010) Basic in materials science. Shanghai Jiaotong University Press. pp. 183