journal article·2026-04Open access

Three-dimensional graphene-carbon fiber network and dual-phase high-entropy alloy for boosting mechanical responses of alumina ceramics

Yingqi Zheng, Jialin Sun, Xiao Li, Le Zhao, Shurong Ning, Jun Zhao

Abstract

The inherent brittleness significantly limits the structural applications of ceramics. Herein, three-dimensional graphene-carbon fiber (3D G/Cf) network and dual-phase AlCoCrFeNi high-entropy alloy (DHEA) were developed to enhance the mechanical performances of alumina ceramics. Initially, multiscale modeling approach integrating molecular dynamics simulations and 3D finite element simulation was developed to predict the effective interface bonding and mechanical behaviors of Al2O3-DHEA-G/Cf composites. Furthermore, 3D G/Cf network was constructed through covalently bonding via amide linkages (-CO-NH-). Finally, the high-hard and high-tough Al2O3-DHEA-G/Cf composites were fabricated employing spark plasm sintering. The toughening mechanism originates from three synergistic effects: chemical grafting at the graphene-carbon fiber interface forms a three-dimensional reinforcement network ensuring efficient stress transfer, the introduced DHEA provides additional energy dissipation, and the multi-scale architecture spanning from nano-sized graphene to micro-scale carbon fibers enables coordinated toughening.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Wang X, Zhong Y, Hu Q (2025) A review of Al2O3-based eutectic ceramics for high-temperature structural materials. J Mater Sci Technol 214:214–23210.1016/j.jmst.2024.07.012 ↗
2. Zhong Y, Yuan Y, Li H, Xu S, Xi Y, Wang X (2025) Orientation relationships of seed crystal-induced Al2O3/GdAlO3 eutectic ceramics. Acta Mater 294:12109410.1016/j.actamat.2025.121094 ↗
3. Liu Y, Su H, Shen Z, Zhao D, Guo Y, Li S, Guo M, Liu L, Fu H (2023) Effect of seed orientations on crystallographic texture control in faceted Al2O3/YAG eutectic ceramic during directional solidification. J Mater Sci Technol 146:86–10110.1016/j.jmst.2022.10.060 ↗
4. Norfauzi T, Hadzley AB, Azlan UAA, Afuza AA, Faiz MM, Naim MF (2019) Fabrication and machining performance of ceramic cutting tool based on the Al2O3-ZrO2-Cr2O3 compositions. J Mater Res Technol 8(6):5114–512310.1016/j.jmrt.2019.08.034 ↗
5. Cui X, Ji J, Guo J, Xiang D, Jiao F, Ming P (2023) Performance and reliability of Al2O3/TiC ceramic tool with multi-bionic surface microstructure in intermittent dry turning of AISI 52100 hardened steel. J Mater Res Technol 25:7219–724010.1016/j.jmrt.2023.07.132 ↗
6. Nevarez-Rascon A, Aguilar-Elguezabal A, Orrantia E, Bocanegra-Bernal M (2011) Compressive strength, hardness and fracture toughness of Al2O3 whiskers reinforced ZTA and ATZ nanocomposites: Weibull analysis. Int J Refract Met Hard Mater 29(3):333–34010.1016/j.ijrmhm.2010.12.008 ↗
7. Shi S, Sekino T, Cho S, Goto T (2020) Ti and TiC co-toughened Al2O3 composites by in-situ synthesis from reaction of Ti and MWCNT. Mater Sci Engineering: A 777:13906610.1016/j.msea.2020.139066 ↗
8. Hong D, Yin Z, Yan S, Xu W (2019) Fine grained Al2O3/SiC composite ceramic tool material prepared by two-step microwave sintering. Ceram Int 45(9):11826–1183210.1016/j.ceramint.2019.03.061 ↗
9. Zhao G, Huang C, Liu H, Zou B, Zhu H, Wang J (2013) Preparation of in-situ growth TaC whiskers toughening Al2O3 ceramic matrix composite. Int J Refract Met Hard Mater 36:122–12510.1016/j.ijrmhm.2012.08.003 ↗
10. Al-Dheylan KA (2004) The low velocity impact loading of Al2O3/SiC whisker reinforced ceramic composite. J Mater Process Technol 155–156:1986–199410.1016/j.jmatprotec.2004.04.398 ↗
11. Dai P, Li A, Tu T, Yang L, Luo X, Wang C, Lv X (2023) Insight of novel CoCrFeMnNi-Al2O3p high entropy alloy matrix composites by mechanical alloying and spark plasma sintering. J Mater Res Technol 26:4871–488610.1016/j.jmrt.2023.08.233 ↗
12. Wang B, Wang Q, Lu N, Liang X, Shen B (2022) Enhanced high-temperature strength of HfNbTaTiZrV refractory high-entropy alloy via Al2O3 reinforcement. J Mater Sci Technol 123:191–20010.1016/j.jmst.2022.01.025 ↗
13. Rogal Ł, Kalita D, Litynska-Dobrzynska L (2017) CoCrFeMnNi high entropy alloy matrix nanocomposite with addition of Al2O3. Intermetallics 86:104–10910.1016/j.intermet.2017.03.019 ↗
14. Wu TT, Wang HM, Li GR, Chou SS, Zhao BW (2025) Study on the microstructure and performance of FeCoNiCrMn high-entropy alloy-based composites reinforced by nano-Al2O3 particles. J Mater Res Technol 35:3751–376210.1016/j.jmrt.2025.02.048 ↗
15. Rogal Ł, Kalita D, Tarasek A, Bobrowski P, Czerwinski F (2017) Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy. J Alloys Compd 708:344–35210.1016/j.jallcom.2017.02.274 ↗
16. Bai C, Tu J, Yang L, Luo H, Liu J, Gu Y, Du Y, Liang Y (2025) Synergistic enhancement of strength-ductility through multi-phase heterogeneous structure induced by SiC particle addition in CoCrFeNi high entropy alloy. Mater Sci Engineering: A 924:14775310.1016/j.msea.2024.147753 ↗
17. Jia J, Liu D, Gao C, Ji G, Guo T (2018) Preparation and mechanical properties of short carbon fibers reinforced α-Al2O3-based composites. Ceram Int 44(16):19345–1935110.1016/j.ceramint.2018.07.163 ↗
18. Chae HG, Newcomb BA, Gulgunje PV, Liu Y, Gupta KK, Kamath MG, Lyons KM, Ghoshal S, Pramanik C, Giannuzzi L, Şahin K, Chasiotis I, Kumar S (2015) High strength and high modulus carbon fibers. Carbon 93:81–8710.1016/j.carbon.2015.05.016 ↗
19. Cao JJ, Chen HH, Du F, Zhao HC, Fan L (2013) Preliminary study of in situ transformed carbon fibers/Al2O3 ceramic matrix composites. Ceram Int 39(6):7037–704210.1016/j.ceramint.2013.02.042 ↗
20. Lee C, Wei X, Kysar JW, Hone J (2008) Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321(5887):385–38810.1126/science.1157996 ↗
21. Cui E, Zhao J, Wang X (2019) Determination of microstructure and mechanical properties of graphene reinforced Al2O3-Ti(C, N) ceramic composites. Ceram Int 45(16):20593–2059910.1016/j.ceramint.2019.07.041 ↗
22. Li Z, Zhao J, Sun J, Gong F, Ni X (2017) Reinforcement of Al2O3/TiC ceramic tool material by multi-layer graphene. Ceram Int 43(14):11421–1142710.1016/j.ceramint.2017.05.353 ↗
23. Zhang RL, Gao B, Ma QH, Zhang J, Cui HZ, Liu L (2016) Directly grafting graphene oxide onto carbon fiber and the effect on the mechanical properties of carbon fiber composites. Mater Design 93:364–36910.1016/j.matdes.2016.01.003 ↗
24. Wu Q, Yang X, He J, Ye Z, Liu Q, Bai H, Zhu J (2022) Improved interfacial adhesion of epoxy composites by grafting porous graphene oxide on carbon fiber. Appl Surf Sci 573:15160510.1016/j.apsusc.2021.151605 ↗
25. Ma Y, Yan C, Xu H, Liu D, Shi P, Zhu Y, Liu J (2018) Enhanced interfacial properties of carbon fiber reinforced polyamide 6 composites by grafting graphene oxide onto fiber surface. Appl Surf Sci 452:286–29810.1016/j.apsusc.2018.04.274 ↗
26. Xiong M, Xiong L, Xiong K, Liu F (2023) A new strategy for improvement of interface and mechanical properties of carbon fiber/epoxy composites by grafting graphene oxide onto carbon fiber with hyperbranched polymers via thiol-ene click chemistry. Polym Compos 44(9):5490–549810.1002/pc.27503 ↗
27. Qiao W, Shi M, Ban T, Hou B, Zhang W, Kong X (2024) Using graphene oxide to enhance the bonding properties between carbon fibers and cement matrix to improve the mechanical properties of cement-based composites. Constr Build Mater 453:13899210.1016/j.conbuildmat.2024.138992 ↗
28. Roy MMKER, M MA, Hassan SBA, Masihadas A (2022) Effect of EPD coated silanized graphene oxide on carbon fiber reinforced plastic: an emphasis on mechanical properties at cryogenic temperatures. Surf Coat Technol 451:12904310.1016/j.surfcoat.2022.129043 ↗
29. Yuan X, Zhu B, Cai X, Qiao K, Zhao S, Yu J (2018) Influence of different surface treatments on the interfacial adhesion of graphene oxide/carbon fiber/epoxy composites. Appl Surf Sci 458:996–100510.1016/j.apsusc.2018.06.161 ↗
30. Yuan X, Zhu B, Cai X, Qiao K, Zhao S, Zhang M, Yu J (2018) Micro-configuration controlled interfacial adhesion by grafting graphene oxide onto carbon fibers. Compos Part A: Appl Sci Manufac 111:83–9310.1016/j.compositesa.2018.05.010 ↗
31. Jiang J, Yao X, Xu C, Su Y, Zhou L, Deng C (2017) Influence of electrochemical oxidation of carbon fiber on the mechanical properties of carbon fiber/graphene oxide/epoxy composites. Compos Part A: Appl Sci Manufac 95:248–25610.1016/j.compositesa.2017.02.004 ↗
32. Han W, Zhao G, Zhang X, Zhou S, Wang P, An Y, Xu B (2015) Graphene oxide grafted carbon fiber reinforced siliconborocarbonitride ceramics with enhanced thermal stability. Carbon 95:157–16510.1016/j.carbon.2015.08.028 ↗
33. Wang Z, Bai E, Liu C, Ren B, Zhang J (2024) Strength, toughness and interface modification of graphene oxide grafted carbon fiber modified concrete. Constr Build Mater 428:13633610.1016/j.conbuildmat.2024.136336 ↗
34. Yan F, Liu L, Li K, Jin L, Zhang M, Liu Y, Xiao L, Ao Y (2021) A novel π bridging method to graft graphene oxide onto carbon fiber for interfacial enhancement of epoxy composites. Compos Sci Technol 201:10848910.1016/j.compscitech.2020.108489 ↗
35. Wang C, Li J, Yu J, Sun S, Li X, Xie F, Jiang B, Wu G, Yu F, Huang Y (2017) Grafting of size-controlled graphene oxide sheets onto carbon fiber for reinforcement of carbon fiber/epoxy composite interfacial strength. Compos Part A: Appl Sci Manufac 101:511–52010.1016/j.compositesa.2017.07.015 ↗
36. Song H, Yang Y, Yang R, Yang J, Zhang Y (2025) Investigation on heat transfer performance of graphene origami/paraffin nanocomposites using molecular dynamics. Compos Commun 58:10253210.1016/j.coco.2025.102532 ↗
37. Song H, Yang R, Yang J, Zhang Y (2026) Interfacial thermal conductance of ZnO/hBN vdW heterostructures. Int J Therm Sci 224:11074410.1016/j.ijthermalsci.2026.110744 ↗
38. Xu Y, Jiang W, Li Q, Niu Y, Yu L, Li G, Fan Z (2024) Significantly improved bonding strength of Al/Mg bimetallic interface by compound casting via FeCoNiCrCu high entropy alloy coating. J Mater Res Technol 30:6870–687610.1016/j.jmrt.2024.05.097 ↗
39. Chu L, Luo L, Fwa TF (2019) Effects of aggregate mineral surface anisotropy on asphalt-aggregate interfacial bonding using molecular dynamics (MD) simulation. Constr Build Mater 225:1–1210.1016/j.conbuildmat.2019.07.178 ↗
40. Wang X, Xie W, Ren J, Zhu J, Li L-Y, Xing F (2021) Interfacial binding energy between calcium-silicate-hydrates and epoxy resin. A Molecular Dynamics Study, Polymers
41. Cao G, Deng C, Chen Y, Wang X, Yu C, Ding J, Zhu H, Peng N (2020) Influence of sintering process and interfacial bonding mechanism on the mechanical properties of MgO-C refractories. Ceram Int 46(10):16860–16866 Part B)10.1016/j.ceramint.2020.03.263 ↗
42. Wang X, Zhao J, Cui E, Tian X, Sun Z (2021) Effect of interfacial structure on mechanical properties of graphene reinforced Al2O3-WC matrix ceramic composite. Nanomaterials10.3390/nano11061374 ↗
43. Munitz A, Salhov S, Hayun S, Frage N (2016) Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy. J Alloys Compd 683:221–23010.1016/j.jallcom.2016.05.034 ↗
44. Chou H-P, Chang Y-S, Chen S-K (2009) Yeh, Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys. Mater Sci Engineering: B 163(3):184–18910.1016/j.mseb.2009.05.024 ↗
45. Swiler TP, Loehman RE (2000) Molecular dynamics simulations of reactive wetting in metal–ceramic systems. Acta Mater 48(18):4419–442410.1016/S1359-6454(00)00228-7 ↗
46. Zhang J, Qian L, Yang W, Wang J, Yang X-S (2025) Dislocation nucleation and shear sliding at dual-phase high-entropy alloy semi-coherent interface with atomic complexity. Acta Mater 293:12111810.1016/j.actamat.2025.121118 ↗
47. Cao T, Zhang Q, Wang L, Wang L, Xiao Y, Yao J, Liu H, Ren Y, Liang J, Xue Y, Li X (2023) Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys. Acta Mater 260:11934310.1016/j.actamat.2023.119343 ↗
48. Chen S, Wang T, Li X, Cheng Y, Zhang G, Gao H (2022) Short-range ordering and its impact on thermodynamic property of high-entropy alloys. Acta Mater 238:11820110.1016/j.actamat.2022.118201 ↗
49. Farkas D, Caro A (2020) Model interatomic potentials for Fe-Ni-Cr-Co-Al high-entropy alloys. J Mater Res 35(22):3031–304010.1557/jmr.2020.294 ↗
50. Dhaliwal G, Nair PB, Singh CV (2019) Uncertainty analysis and estimation of robust AIREBO parameters for graphene. Carbon 142:300–31010.1016/j.carbon.2018.10.020 ↗
51. Stuart SJ, Tutein AB, Harrison JA (2000) A reactive potential for hydrocarbons with intermolecular interactions. J Chem Phys 112(14):6472–648610.1063/1.481208 ↗
52. Rappe AK, Casewit CJ, Colwell KS, Goddard WA, Skiff WM (1992) UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations. J Am Chem Soc 114(25):10024–1003510.1021/ja00051a040 ↗
53. Parvandar Asadollahi B, Pour Panah M, Javdani A (2022) Experimental investigation and molecular dynamics simulation of contributing variables on abrasive water jet on aluminum alloy 7075 reinforced with Al2O3, graphite and silicon carbide. Arab J Sci Eng 47(12):15303–1532110.1007/s13369-022-06585-z ↗
54. Barman S, Gupta KK, Dey S (2025) Molecular dynamics-based explanation of the reinforcement geometry effects on CNT/graphene-reinforced Al0.3CoCrFeNi high-entropy alloys. Sci Rep 15(1):2498410.1038/s41598-025-06470-3 ↗
55. Cao Z, Sun J, Zhang K, Zhao W, Yu Z (2024) Crack propagation and mechanical properties simulation of G/(HfNbTaTiZr)C-Al2O3 gradient composites. Eur J Mech A Solids 103:10516510.1016/j.euromechsol.2023.105165 ↗
56. Sun Z, Zhao J (2020) Nano-graphene toughened Al2O3 ceramic materials: 3D simulation of the fracture behaviour. Ceram Int 46(18):28569–2857710.1016/j.ceramint.2020.08.014 ↗
57. Liu B, Sun J, Ning S, Cao Z, Li X, Yu H, Zhao J (2025) Mechanical responses of hybrid graphene-CNT reinforced Al2O3 through three-dimensional simulation. J Alloys Compd 1013:17862010.1016/j.jallcom.2025.178620 ↗
58. Zheng Y, Sun J, Ning S, Li X, Zhao J (2025) Determination of optimal graphene configuration on the mechanical responses and machining performance of ceramic cutting tool. Ceram Int 51(29):60542–60554 Part A)10.1016/j.ceramint.2025.10.251 ↗
59. Ji W, Zhang J, Wang W, Wang H, Zhang F, Wang Y, Fu Z (2015) Fabrication and properties of TiB2-based cermets by spark plasma sintering with CoCrFeNiTiAl high-entropy alloy as sintering aid. J Eur Ceram Soc 35(3):879–88610.1016/j.jeurceramsoc.2014.10.024 ↗
60. Ocak BC, Goller G (2021) Investigation the effect of FeNiCoCrMo HEA addition on properties of B4C ceramic prepared by spark plasma sintering. J Eur Ceram Soc 41(13):6290–630110.1016/j.jeurceramsoc.2021.06.003 ↗
61. Cui E, Zhao J, Wang X, Sun J, Huang X, Wang C (2018) Microstructure and toughening mechanisms of Al2O3/(W, Ti)C/graphene composite ceramic tool material. Ceram Int 44(12):13538–1354310.1016/j.ceramint.2018.04.185 ↗
62. Sun J, Zhao J, Chen M, Zhou Y, Ni X, Li Z, Gong F (2017) Multilayer graphene reinforced functionally graded tungsten carbide nano-composites. Mater Design 134:171–18010.1016/j.matdes.2017.08.041 ↗
63. Jialin S, Jun Z, Yuan C, Li W, Xialun Y, Zhifu H (2022) Macro-micro-nano multistage toughening in nano-laminated graphene ceramic composites. Mater Today Phys 22:10059510.1016/j.mtphys.2021.100595 ↗
64. Shah WA, Luo X, Rabiu BI, Huang B, Yang YQ (2021) Toughness enhancement and thermal properties of graphene-CNTs reinforced Al2O3 ceramic hybrid nanocomposites. Chem Phys Lett 781:13897810.1016/j.cplett.2021.138978 ↗
65. Shah WA, Luo X, Yang YQ (2021) Microstructure, mechanical, and thermal properties of graphene and carbon nanotube-reinforced Al2O3 nanocomposites. J Mater Sci: Mater Electron 32(10):13656–13672
66. Sun J, Chen Y, Zhai P, Zhou Y, Zhao J, Huang Z (2022) Tribological performance of binderless tungsten carbide reinforced by multilayer graphene and SiC whisker. J Eur Ceram Soc 42(12):4817–482410.1016/j.jeurceramsoc.2022.05.021 ↗
67. Anstis GR, Chantikul P, Lawn BR, Marshall DB (1981) A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements. J Am Ceram Soc 64(9):533–53810.1111/j.1151-2916.1981.tb10320.x ↗
68. Zhang RL, Gao B, Du WT, Zhang J, Cui HZ, Liu L, Ma QH, Wang CG, Li FH (2016) Enhanced mechanical properties of multiscale carbon fiber/epoxy composites by fiber surface treatment with graphene oxide/polyhedral oligomeric silsesquioxane. Compos Part A: Appl Sci Manufac 84:455–46310.1016/j.compositesa.2016.02.021 ↗
69. Kotal M, Thakur AK, Bhowmick AK (2013) Polyaniline–carbon nanofiber composite by a chemical grafting approach and its supercapacitor application. ACS Appl Mater Interfaces 5(17):8374–838610.1021/am4014049 ↗
70. Zhang RL, Gao B, Zhang J, Cui HZ, Li DW (2015) Propagation of PAMAM dendrimers on the carbon fiber surface by in situ polymerization: a novel methodology for fiber/matrix composites. Appl Surf Sci 359:812–81810.1016/j.apsusc.2015.10.204 ↗
71. Shanmugharaj AM, Yoon JH, Yang WJ, Ryu SH (2013) Synthesis, characterization, and surface wettability properties of amine functionalized graphene oxide films with varying amine chain lengths. J Colloid Interface Sci 401:148–15410.1016/j.jcis.2013.02.054 ↗
72. Zhao F, Huang Y, Liu L, Bai Y, Xu L (2011) Formation of a carbon fiber/polyhedral oligomeric silsesquioxane/carbon nanotube hybrid reinforcement and its effect on the interfacial properties of carbon fiber/epoxy composites. Carbon 49(8):2624–263210.1016/j.carbon.2011.02.026 ↗
73. Cano-Crespo R, Moshtaghioun BM, Gómez-García D, Domínguez-Rodríguez A, Moreno R (2017) Carbon nanofibers replacing graphene oxide in ceramic composites as a reinforcing-phase: Is it feasible? J Eur Ceram Soc 37(12):3791–379610.1016/j.jeurceramsoc.2017.03.027 ↗
74. Liu J, Yan H, Jiang K (2013) Mechanical properties of graphene platelet-reinforced alumina ceramic composites. Ceram Int 39(6):6215–622110.1016/j.ceramint.2013.01.041 ↗
75. Jia J, Liu D, Zhang S, Zhang B, Liu S, Ji G (2019) Effects of CNTs content on microstructure and mechanical properties of Cnt/α-Al2O3 and Cnt-Csf/α-Al2O3 composites. Ceram Int 45(16):19956–1996110.1016/j.ceramint.2019.06.253 ↗
76. Ahmad I, Islam M, Subhani T, Zhu Y (2016) Toughness enhancement in graphene nanoplatelet/SiC reinforced Al2O3 ceramic hybrid nanocomposites. Nanotechnology 27(42):42570410.1088/0957-4484/27/42/425704 ↗
77. Galusek D, Sedláček J, Švančárek P, Riedel R, Satet R, Hoffmann M (2007) The influence of post-sintering HIP on the microstructure, hardness, and indentation fracture toughness of polymer-derived Al2O3-SiC nanocomposites. J Eur Ceram Soc 27(2–3):1237–124510.1016/j.jeurceramsoc.2006.04.028 ↗
78. Zhu Z, Yin Z, Hong D, Yuan J (2020) Preparation of complex-shaped Al2O3/SiCp/SiCw ceramic tool by two-step microwave sintering. Ceram Int 46(17):27362–2737210.1016/j.ceramint.2020.07.221 ↗
79. Žmak I, Ćorić D, Mandić V, Ćurković L (2019) Hardness and indentation fracture toughness of slip cast alumina and alumina-zirconia ceramics. Materials 13(1):12210.3390/ma13010122 ↗