Lignin-based epoxy composite vitrimers with light-controlled remoldability
Source abstract
Abstract
Abstract Vitrimers open new possibilities in the reprocess of epoxy and other thermosets. However, direct heating is not practical on many occasions, and the waste vitrimers would cause great harm to the environment. In this work, we propose to use kraft lignin (KL) to fabricate vitrimer with reprocessability and environmental friendliness. The lignin-based epoxy vitrimer was fabricated by blending epoxy-modified KL and poly(ethylene glycol) bis(carboxymethyl) ether (PEG-DCM). The obtained lignin-based epoxy vitrimer (EML/PEG-DCM) showed good light-to-heat capability. Under the infrared radiation (808 nm, 1 W cm-2) for only 30 s, the surface temperature of EML/PEG-DCM was over ∼148 °C, and reached the maximum at ∼231 °C for 5 min. This good light-to-heat effect can activate the dynamic 3D crosslinking networks and repair the vitrimer. The energy consumption of the light-controlled remolding process is only one-thousandth of the conventional hot-press. This study not only helps to explore the natural characteristics of lignins, promoting their functional and intelligent utilization but also provides a new raw material platform for the development of green vitrimer materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lignin and Wood Chemistry · Polymer composites and self-healing · Oxidative Organic Chemistry Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Hu W, Huang J, Zhang X, Zhao S, Pei L, Zhang C, Liu Y, Wang Z (2020) A mechanically robust and reversibly wettable benzoxazine/epoxy/mesoporous TiO2 coating for oil/water separation. Appl Surf Sci 507:145168. https://doi.org/10.1016/j.apsusc.2019.14516810.1016/j.apsusc.2019.145168 ↗
2. Li X, Zhao S, Hu W, Zhang X, Pei L, Wang Z (2019) Robust superhydrophobic surface with excellent adhesive properties based on benzoxazine/epoxy/mesoporous SiO2. Appl Surf Sci 481:374–378. https://doi.org/10.1016/j.apsusc.2019.03.11410.1016/j.apsusc.2019.03.114 ↗
3. Zhu Q, Zhao Y, Miao B, Abo-Dief HM, Qu M, Pashameah RA, Xu BB, Huang M, Algadi H, Liu X, Guo Z (2022) Hydrothermally synthesized ZnO-RGO-PPy for water-borne epoxy nanocomposite coating with anticorrosive reinforcement. Prog Org Coat 172:107153. https://doi.org/10.1016/j.porgcoat.2022.10715310.1016/j.porgcoat.2022.107153 ↗
4. Guo J, Chen Z, El-Bahy ZM, Liu H, Abo-Dief HM, Abdul W, Abualnaja KM, Alanazi AK, Zhang P, Huang M, Hu G, Zhu J (2022) Tunable negative dielectric properties of magnetic CoFe2O4/graphite-polypyrrole metacomposites. Adv Compos Hybrid Mater 5(2):899–906. https://doi.org/10.1007/s42114-022-00485-410.1007/s42114-022-00485-4 ↗
5. Guo J, Chen Z, Xu X, Li X, Liu H, Xi S, Abdul W, Wu Q, Zhang P, Xu BB, Zhu J, Guo Z (2022) Enhanced electromagnetic wave absorption of engineered epoxy nanocomposites with the assistance of polyaniline fillers. Adv Compos Hybrid Mater 5(3):1769–1777. https://doi.org/10.1007/s42114-022-00417-210.1007/s42114-022-00417-2 ↗
6. Pan D, Yang G, Abo-Dief HM, Dong J, Su F, Liu C, Li Y, Bin XuB, Murugadoss V, Naik N, El-Bahy SM, El-Bahy ZM, Huang M, Guo Z (2022) Vertically aligned silicon carbide nanowires/boron nitride cellulose aerogel networks enhanced thermal conductivity and electromagnetic absorbing of epoxy composites. Nano-Micro Lett 14(1):118. https://doi.org/10.1007/s40820-022-00863-z10.1007/s40820-022-00863-z ↗
7. Montarnal D, Capelot M, Tournilhac F, Leibler L (2011) Silica-like malleable materials from permanent organic networks. Science 334(6058):965–968. https://doi.org/10.1126/science.121264810.1126/science.1212648 ↗
8. Capelot M, Unterlass MM, Tournilhac F, Leibler L (2012) Catalytic control of the vitrimer glass transition. ACS Macro Lett 1(7):789–792. https://doi.org/10.1021/mz300239f10.1021/mz300239f ↗
9. Capelot M, Montarnal D, Tournilhac F, Leibler L (2012) Metal-catalyzed transesterification for healing and assembling of thermosets. J Am Chem Soc 134(18):7664–7667. https://doi.org/10.1021/ja302894k10.1021/ja302894k ↗
10. Wu J, Yu X, Zhang H, Guo J, Hu J, Li M-H (2020) Fully biobased vitrimers from glycyrrhizic acid and soybean oil for self-healing, shape memory, weldable, and recyclable materials. ACS Sustain Chem Eng 8(16):6479–6487. https://doi.org/10.1021/acssuschemeng.0c0104710.1021/acssuschemeng.0c01047 ↗
11. Zhang W, Wu J, Gao L, Zhang B, Jiang J, Hu J (2021) Recyclable, reprocessable, self-adhered and repairable carbon fiber reinforced polymers using full biobased matrices from camphoric acid and epoxidized soybean oil. Green Chem 23(7):2763–2772. https://doi.org/10.1039/d1gc00648g10.1039/d1gc00648g ↗
12. Hong G, Sun Y, Wang M, Wang Z, Han G, Jin L, Lin P, Xia Y, Zhang K (2020) Mechanically Robust and reprocessable acrylate vitrimers with hydrogen-bond-integrated networks for photo-3D printing. ACS Appl Mater Interfaces 13(1):1581–1591. https://doi.org/10.1021/acsami.0c1952010.1021/acsami.0c19520 ↗
13. Niu W, Cao X, Wang Y, Yao B, Zhao Y, Cheng J, Wu S, Zhang S, He X (2021) Photonic vitrimer elastomer with self-healing, high toughness, mechanochromism, and excellent durability based on dynamic covalent bond. Adv Func Mater 31(13):2009017. https://doi.org/10.1002/adfm.20200901710.1002/adfm.202009017 ↗
14. Liu R, Dai L, Si C, Zeng Z (2018) Antibacterial and hemostatic hydrogel via nanocomposite from cellulose nanofibers. Carbohyd Polym 195:63–70. https://doi.org/10.1016/j.carbpol.2018.04.08510.1016/j.carbpol.2018.04.085 ↗
15. Dai L, Liu R, Hu L-Q, Zou Z-F, Si C-L (2017) Lignin nanoparticle as a novel green carrier for the efficient delivery of resveratrol. ACS Sustain Chem Eng 5(9):8241–8249. https://doi.org/10.1021/acssuschemeng.7b0190310.1021/acssuschemeng.7b01903 ↗
16. Zhang M, Du H, Liu K, Nie S, Xu T, Zhang X, Si C (2021) Fabrication and applications of cellulose-based nanogenerators. Adv Compos Hybrid Mater 4(4):865–884. https://doi.org/10.1007/s42114-021-00312-210.1007/s42114-021-00312-2 ↗
17. Liu K, Liu W, Li W, Duan Y, Zhou K, Zhang S, Ni S, Xu T, Du H, Si C (2022) Strong and highly conductive cellulose nanofibril/silver nanowires nanopaper for high performance electromagnetic interference shielding. Adv Compos Hybrid Mater 5(2):1078–1089. https://doi.org/10.1007/s42114-022-00425-210.1007/s42114-022-00425-2 ↗
18. Liu H, Xu T, Liang Q, Zhao Q, Zhao D, Si C (2022) Compressible cellulose nanofibrils/reduced graphene oxide composite carbon aerogel for solid-state supercapacitor. Advanced Composites and Hybrid Materials 5(2):1168–1179. https://doi.org/10.1007/s42114-022-00427-010.1007/s42114-022-00427-0 ↗
19. Sun Z, Fridrich B, De Santi A, Elangovan S, Barta K (2018) Bright side of lignin depolymerization: toward new platform chemicals. Chem Rev 118(2):614–678. https://doi.org/10.1021/acs.chemrev.7b0058810.1021/acs.chemrev.7b00588 ↗
20. Xu J, Li C, Dai L, Xu C, Zhong Y, Yu F, Si C (2020) Biomass fractionation and lignin fractionation towards lignin valorization. Chemsuschem 13(17):4284–4295. https://doi.org/10.1002/cssc.20200149110.1002/cssc.202001491 ↗
21. Zhu E-Q, Xu G-F, Ye X-Y, Yang J, Yang H-Y, Wang D-W, Shi Z-J, Deng J (2021) Preparation and characterization of hydrothermally pretreated bamboo powder with improved thermoplasticity by propargyl bromide modification in a heterogeneous system. Adv Compos Hybrid Mater 4(4):1059–1069. https://doi.org/10.1007/s42114-021-00316-y10.1007/s42114-021-00316-y ↗
22. Xie Z, Tian Z, Liu S, Ma H, Ji X-X, Si C (2022) Effects of different amounts of cellulase on the microstructure and soluble substances of cotton stalk bark. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-021-00400-310.1007/s42114-021-00400-3 ↗
23. Zakzeski J, Bruijnincx PCA, Jongerius AL, Weckhuysen BM (2010) The catalytic valorization of lignin for the production of renewable chemicals. Chem Rev 110(6):3552–3599. https://doi.org/10.1021/cr900354u10.1021/cr900354u ↗
24. Calvo-Flores FG, Dobado JA (2010) Lignin as renewable raw material. Chemsuschem 3(11):1227–1235. https://doi.org/10.1002/cssc.20100015710.1002/cssc.201000157 ↗
25. Chen J, Qi J, He J, Yan Y, Jiang F, Wang Z, Zhang Y (2022) Biobased composites with high lignin content and excellent mechanical properties toward the ingenious photoresponsive actuator. ACS Appl Mater Interfaces 14(10):12748–12757. https://doi.org/10.1021/acsami.2c0219510.1021/acsami.2c02195 ↗
26. Zhao X, Huang C, Xiao D, Wang P, Luo X, Liu W, Liu S, Li J, Li S, Chen Z (2021) Melanin-inspired design: preparing sustainable photothermal materials from lignin for energy generation. ACS Appl Mater Interfaces 13(6):7600–7607. https://doi.org/10.1021/acsami.0c2125610.1021/acsami.0c21256 ↗
27. Yang H, Wang D, Bi H, Ren Z, Xu M, Huang Z, Cai L (2021) Photo-assisted shape memory lignin/cellulose acetate composites for information encryption. J Appl Polym Sci 139(16):51997. https://doi.org/10.1002/app.5199710.1002/app.51997 ↗
28. Wang Y, Hou J, Huang Y, Fu Y (2021) Structure-controlled lignin complex for PLA composites with outstanding antibacterial, fluorescent and photothermal conversion properties. Int J Biol Macromol 194(1):1002–1009. https://doi.org/10.1016/j.ijbiomac.2021.11.15910.1016/j.ijbiomac.2021.11.159 ↗
29. Xue Y, Liang W, Li Y, Wu Y, Peng X, Qiu X, Liu J, Sun R (2016) Fluorescent pH-sensing probe based on biorefinery wood lignosulfonate and its application in human cancer cell bioimaging. J Agric Food Chem 64(51):9592–9600. https://doi.org/10.1021/acs.jafc.6b0458310.1021/acs.jafc.6b04583 ↗
30. Ma M, Dai L, Xu J, Liu Z, Ni Y (2020) A simple and effective approach to fabricate lignin nanoparticles with tunable sizes based on lignin fractionation. Green Chem 22(6):2011–2017. https://doi.org/10.1039/d0gc00377h10.1039/d0gc00377h ↗
31. Ma M, Dai L, Si C, Hui L, Liu Z, Ni Y (2019) A facile preparation of super long-term stable lignin nanoparticles from black liquor. Chemsuschem 12(24):5239–5245. https://doi.org/10.1002/cssc.20190228710.1002/cssc.201902287 ↗
32. Li J, Liu W, Qiu X, Zhao X, Chen Z, Yan M, Fang Z, Li Z, Tu Z, Huang J (2021) Lignin: a sustainable photothermal block for smart elastomers. Green Chem 24(2):823–836. https://doi.org/10.1039/d1gc03571a10.1039/d1gc03571a ↗
33. Ran F, Li C, Hao Z, Zhang X, Dai L, Si C, Shen Z, Qiu Z, Wang J (2022) Combined bactericidal process of lignin and silver in a hybrid nanoparticle on E. coli. Adv Compos Hybrid Mater 1–11. https://doi.org/10.1007/s42114-022-00460-z10.1007/s42114-022-00460-z ↗
34. Adrian M, Mohammad M, Mika HS (2021) Catalyst-free synthesis of lignin vitrimers with tunable mechanical properties: circular polymers and recoverable adhesives. ACS Appl Mater Interfaces 13(48):57952–57961. https://doi.org/10.1021/acsami.1c1741210.1021/acsami.1c17412 ↗
35. Adler E (1977) Lignin chemistry—past, present and future. Wood Sci Technol 11:169–218. https://doi.org/10.1007/bf0036561510.1007/bf00365615 ↗
36. Brianna MU, Andrea MK (2015) Strategies for the conversion of lignin to high-value polymeric materials: review and perspective. Chem Rev 116(4):2275–2306. https://doi.org/10.1021/acs.chemrev.5b0034510.1021/acs.chemrev.5b00345 ↗
37. Xu X-Q, Wang Z, Li R, He Y, Wang Y (2018) A degradable and recyclable photothermal conversion polymer. Chem A Eur J 24(39):9769–9772. https://doi.org/10.1002/chem.20180165410.1002/chem.201801654 ↗
38. Xue B, Tang R, Xue D, Guan Y, Sun Y, Zhao W, Tan J, Li X (2021) Sustainable alternative for bisphenol A epoxy resin high-performance and recyclable lignin-based epoxy vitrimers. Industrial Crops Products 168(15):113583. https://doi.org/10.1016/j.indcrop.2021.11358310.1016/j.indcrop.2021.113583 ↗
39. Mohd A, Haruo K, Shiro S (2011) Gas- and solid/liquid-phase reactions during pyrolysis of softwood and hardwood lignins. J Anal Appl Pyrol 92(2):417–425. https://doi.org/10.1016/j.jaap.2011.08.00310.1016/j.jaap.2011.08.003 ↗
40. Chen Y, Yin Q, Zhang X, Zhang W, Jia H, Ji Q, Yang F, Rui X (2019) Rational design of multifunctional properties for styrene-butadiene rubber reinforced by modified Kevlar nanofibers. Compos B Eng 166:196–203. https://doi.org/10.1016/j.compositesb.2018.11.13210.1016/j.compositesb.2018.11.132 ↗
41. Dai L, Liu R, Si C (2018) A novel functional lignin-based filler for pyrolysis and feedstock recycling of poly(l-lactide). Green Chem 20(8):1777–1783. https://doi.org/10.1039/c7gc03863a10.1039/c7gc03863a ↗
42. Tang R, Xue B, Tan J, Guan Y, Wen J, Li X, Zhao W (2022) Regulating lignin-based epoxy vitrimer performance by fine-tuning the lignin structure. ACS Appl Polym Mater 4(2):1117–1125. https://doi.org/10.1021/acsapm.1c0154110.1021/acsapm.1c01541 ↗
43. Jung HS, Verwilst P, Sharma A, Shin J, Sessler JL, Kim JS (2018) Organic molecule-based photothermal agents: an expanding photothermal therapy universe. Chem Soc Rev 47(7):2280–2297. https://doi.org/10.1039/c7cs00522a10.1039/c7cs00522a ↗
44. Xu Y, Karin O, Minna H (2019) One-pot synthesis of lignin thermosets exhibiting widely tunable mechanical properties and shape memory behavior. ACS Sustain Chem Eng 7(15):13456–13463. https://doi.org/10.1021/acssuschemeng.9b0292110.1021/acssuschemeng.9b02921 ↗
45. Liu W, Fang C, Wang S, Huang J, Qiu X (2019) High-Performance Lignin-Containing Polyurethane Elastomers with Dynamic Covalent Polymer Networks. Macromolecules 52(17):6474–6484. https://doi.org/10.1021/acs.macromol.9b0141310.1021/acs.macromol.9b01413 ↗
46. Gong X, Liu T, Yu S, Meng Y, Lu J, Cheng Y, Wang H (2020) The preparation and performance of a novel lignin-based adhesive without formaldehyde. Industrial Crops Products 153:112593. https://doi.org/10.1016/j.indcrop.2020.11259310.1016/j.indcrop.2020.112593 ↗
47. Wen J-L, Sun S-L, Xue B-L, Sun R-C (2013) Recent advances in characterization of lignin polymer by solution-state nuclear magnetic resonance (NMR) methodology. Materials 6(1):359–39110.3390/ma6010359 ↗