Boosting the mechanical and biological performance of decellularized plant-derived scaffolds via alkali-mediated mercerization
Source abstract
Abstract
Abstract Tissue engineering aims to develop functional biomimetic constructs to restore, maintain, or replace damaged tissues. Recently, decellularized plant-based scaffolds have emerged as sustainable, cost-effective, and ethically favorable alternatives to animal-derived matrices due to their preserved three-dimensional architecture. Despite their many advantages, the clinical translation of plant-derived scaffolds remains limited by two major challenges: insufficient mechanical strength and poor cell-material interactions. Here, we introduce alkali-mediated mercerization as a simple, one-step post-decellularization modification strategy to simultaneously enhance the mechanical properties and cellular response of plant-derived scaffolds. First, spinach leaves were chemically decellularized and subsequently subjected to sodium hydroxide treatments with varying concentrations and exposure durations. The effects of mercerization were then evaluated through morphological, chemical, structural, physicochemical, mechanical, and biological characterizations. Mercerization was supported by evidence of cellulose structural and crystalline reorganization, along with morphological densification of the fibrillar network. These modifications resulted in a pronounced enhancement in surface hydrophilicity, with water contact angles decreasing to 0° within seconds, indicating rapid surface hydration. The physicochemical improvements translated into substantial mechanical reinforcement. The ultimate tensile strength increased from 0.62 ± 0.06 MPa in untreated scaffolds to 3.11 ± 0.20 MPa in mercerized scaffolds (∼5-fold increase), while the elastic modulus increased from 38.53 ± 17.73 MPa to 110.00 ± 37.20 MPa (∼3-fold increase), demonstrating significantly improved stiffness and load-bearing capacity. Finally, biological evaluations showed that all alkali-treated scaffolds were non-cytotoxic. Importantly, mercerized scaffolds supported a more favorable cellular response, as indicated by up to a 3.0-fold increase in metabolic activity after 7 d compared to untreated spinach controls, together with improved cellular coverage. Overall, this study provides a comprehensive and quantitative demonstration that alkali-mediated mercerization enables simultaneous mechanical strengthening and improved cellular response in plant-derived scaffolds through a simple, cost-effective, and sustainable post-processing modification strategy, highlighting its translational potential for tissue engineering applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tissue Engineering and Regenerative Medicine · Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Izmir Institute of Technology
Graduate School of Education, Izmir Institute of Technology
Funding
Scientific Research Projects Coordination Unit of İzmir Institute of Technology · Research Universities Support Program · Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
References (100+)
Show source-provided references
1. Tissue engineering10.1126/science.8493529 ↗
2. Cell-scaffold interactions in the bone tissue engineering triad10.22203/eCM.v026a09 ↗
3. Fibroblast response is enhanced by poly(L-lactic acid) nanotopography edge density and proximity10.2147/IJN.S2.2.201 ↗
4. Electrospinning of poly(glycerol sebacate)-based nanofibers for nerve tissue engineering10.1016/j.msec.2016.03.035 ↗
5. Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants10.1016/j.biotechadv.2011.06.004 ↗
6. Synthetic polymers for skin biomaterials
7. Synthetic polymers for cell-based therapies
8. Hybrid scaffolds based on PLGA and silk for bone tissue engineering10.1002/term.1989 ↗
9. Silver nitrate-assisted photo-crosslinking for enhancing the mechanical properties of an alginate/silk fibroin-based 3D scaffold10.1088/1758-5090/ad3d8b ↗
10. Elastic porous microspheres/extracellular matrix hydrogel injectable composites releasing dual bio-factors enable tissue regeneration10.1038/s41467-024-45764-4 ↗
11. A comprehensive review on natural macromolecular biopolymers for biomedical applications: recent advancements, current challenges, and future outlooks10.1016/j.carpta.2024.100536 ↗
12. 3D collagen nanofiber scaffold with adipose derived stem cells for functional adipose tissue regeneration10.1038/s41598-025-04763-1 ↗
13. Osteogenic potency of dental stem cell-composite scaffolds in an animal cleft palate model10.1016/j.heliyon.2024.e36036 ↗
14. Nanostructure characteristics of three types of platelet-rich fibrin biomaterial: a histological and immunohistochemical study10.1088/2053-1591/ad2160 ↗
15. Palm readings: manicaria saccifera palm fibers are biocompatible textiles with low immunogenicity10.1016/j.msec.2019.110484 ↗
16. Preparation of 3D printed polylactic acid/bacterial cellulose composite scaffold for tissue engineering applications10.3390/polym14214756 ↗
17. Preparation and characterization of magnetically responsive bacterial polyester based nanospheres for cancer therapy10.1166/jbn.2012.1431 ↗
18. Bacterial biopolymers in tissue engineering and regenerative medicine; current applications and future perspective10.1016/j.bcab.2023.102928 ↗
19. Single stage purification of flax, hemp, and milkweed stem and their physical and morphological properties10.1080/1023666X.2017.1387688 ↗
20. A technique for production of nanocrystalline cellulose with a narrow size distribution10.1007/s10570-009-9277-1 ↗
21. Pectin as rheology modifier of a gelatin-based biomaterial ink10.3390/ma14113109 ↗
22. Novel synthesis strategies for natural polymer and composite biomaterials as potential scaffolds for tissue engineering10.1098/rsta.2010.0009 ↗
23. The latest achievements in plant cellulose-based biomaterials for tissue engineering focusing on skin repair10.1016/j.chemosphere.2021.132529 ↗
24. Biofabrication of tissue scaffolds10.5772/54125 ↗
25. Fish skin gelatin nanofibrous scaffolds spun using alternating field electrospinning and in-vitro tested with tdTomato mice fibroblasts10.1016/j.mtcomm.2022.103417 ↗
26. Additive manufacturing of cartilage-mimetic scaffolds as off-the-shelf implants for joint regeneration10.1088/1758-5090/ac41a0 ↗
27. Macro porous tannin spray-dried powder scaffolds with stem cells for bone engineering10.1016/j.matchemphys.2019.121980 ↗
28. Boosting the osteogenic and angiogenic performance of multiscale porous polycaprolactone scaffolds by in vitro generated extracellular matrix decoration10.1021/acsami.9b23100 ↗
29. Decellularization of bovine pericardium for tissue-engineering by targeted removal of xenoantigens
30. Freeze-drying as a novel biofabrication method for achieving a controlled microarchitecture within large, complex natural biomaterial scaffolds10.1002/adhm.201700598 ↗
31. An overview of tissue and whole organ decellularization processes10.1016/j.biomaterials.2011.01.057 ↗
32. Organ reengineering through development of a transplantable recellularized liver graft using decellularized liver matrix10.1038/nm.2170 ↗
33. Small intestinal submucosa: a substrate for in vitro cell growth10.1163/156856298X00208 ↗
34. Discarded human kidneys as a source of ECM scaffold for kidney regeneration technologies10.1016/j.biomaterials.2013.04.033 ↗
35. Mouse placental scaffolds: a three-dimensional environment model for recellularization10.1177/2041731419867962 ↗
36. Comparative analysis of decellularization methods for the production of decellularized umbilical cord matrix10.3390/cimb46070455 ↗
37. Immunogenicity in xenogeneic scaffold generation: antigen removal vs. decellularization10.1016/j.actbio.2014.01.028 ↗
38. Bioreactivity of decellularized animal, plant, and fungal scaffolds: perspectives for medical applications10.1039/D0TB01751E ↗
39. Plant tissues as 3D natural scaffolds for adipose, bone and tendon tissue regeneration10.3389/fbioe.2020.00723 ↗
40. Apple derived cellulose scaffolds for 3D mammalian cell culture10.1371/journal.pone.0097835 ↗
41. Biocompatibility of subcutaneously implanted plant-derived cellulose biomaterials10.1371/journal.pone.0157894 ↗
42. Crossing kingdoms: using decellularized plants as perfusable tissue engineering scaffolds10.1016/j.biomaterials.2017.02.011 ↗
43. Decellularized spinach biomaterials support physiologically relevant mechanical cyclic strain and prompt a stretch-induced cellular response10.1021/acsabm.2c00721 ↗
44. Enhancing wound regeneration potential of fibroblasts using ascorbic acid-loaded decellularized baby spinach leaves10.1007/s00289-024-05185-1 ↗
45. Decellularization and characterization of leek: a potential cellulose-based biomaterial10.1007/s10570-020-03278-4 ↗
46. Engineering aligned skeletal muscle tissue using decellularized plant-derived scaffolds10.1021/acsbiomaterials.0c00058 ↗
47. Decellularization and oxidation process of bamboo stem enhance biodegradation and osteogenic differentiation10.1016/j.msec.2020.111500 ↗
48. Development of tissue-engineered vascular grafts from decellularized parsley stems10.1039/D3SM01236K ↗
49. Current advances in the development of decellularized plant extracellular matrix10.3389/fbioe.2021.712262 ↗
50. Characterization of decellularized plant leaf as an emerging biomaterial platform10.1021/acsbiomaterials.4c01254 ↗
51. Decellularised baby spinach leaves and their potential use in tissue engineering applications: studying and promoting neovascularisation10.1177/0885328219863115 ↗
52. Tuning the efficacy of decellularized apple by coating with alginate/gelatin to behave as a bioscaffold for cultured meat production10.1016/j.foodres.2023.113907 ↗
53. Decellularized banana leaves: eco-friendly scaffolds for cell-based seafood10.3389/fsufs.2024.1341151 ↗
54. Decellularized lucky bamboo scaffolds for cartilage tissue engineering10.1088/1748-605X/adebd2 ↗
55. Creation of a contractile biomaterial from a decellularized spinach leaf without ECM protein coating: an in vitro study10.1002/jbm.a.36971 ↗
56. Improving the biocompatibility of plant-derived scaffolds for tissue engineering using heat treatment10.3390/jfb16100380 ↗
57. John Mercer and mercerization, 184410.1021/ed021p430 ↗
58. Mercerization in degassed sodium hydroxide solution10.1007/BF02908265 ↗
59. Oxidized carbonized cellulose-coated filters for environmental contaminant adsorption and detection10.1021/acs.iecr.0c01973 ↗
60. Image analysis and Fourier transform infrared light microscopy and transmission electron microscopy of mercerized cotton yarns10.1017/S1431927600017943 ↗
61. Development of pro-angiogenic wound dressings from 2-deoxy-D-ribose (2dDR)-loaded decellularized plant leaves10.1007/s10853-023-09064-4 ↗
62. Key factors in FTIR spectroscopic analysis of DNA: the sampling technique, pretreatment temperature and sample concentration10.1039/C8AY00386F ↗
63. Chemical and structural characterization of maize stover fractions in aspect of its possible applications10.3390/ma14061527 ↗
64. Mercerization of primary wall cellulose and its implication for the conversion of cellulose I→cellulose II10.1023/A:1015877021688 ↗
65. Low-bond axisymmetric drop shape analysis for surface tension and contact angle measurements of sessile drops10.1016/j.colsurfa.2010.04.040 ↗
66. 2-deoxy-d-ribose (2dDR) upregulates vascular endothelial growth factor (VEGF) and stimulates angiogenesis10.1016/j.mvr.2020.104035 ↗
67. The effects of processing methods upon mechanical and biologic properties of porcine dermal extracellular matrix scaffolds10.1016/j.biomaterials.2010.07.083 ↗
68. Heart valve tissue engineering10.1161/01.RES.0000185326.04010.9f ↗
69. Decellularized native and engineered arterial scaffolds for transplantation10.3727/000000003108747136 ↗
70. Decellularization and sterilization of porcine urinary bladder matrix for tissue engineering in the lower urinary tract10.2217/17460751.3.2.145 ↗
71. Method for the decellularization of intact rat liver10.4161/org.6.2.11546 ↗
72. Xenogenic extracellular matrices as potential biomaterials for interposition grafting in urological surgery10.1016/j.juro.2010.07.038 ↗
73. Tissue-engineered trachea regeneration using decellularized trachea matrix treated with laser micropore technique10.1016/j.actbio.2017.05.010 ↗
74. An edible, decellularized plant derived cell carrier for lab grown meat10.3390/app12105155 ↗
75. Decellularized lotus petioles integrated microfluidic chips for neural cell alignment monitoring10.1016/j.compositesb.2023.110621 ↗
76. Enhanced liver cancer cellular response to a drug on a 3D nanostructured matrix of decellularized eggplant leaves10.1016/j.mtcomm.2024.109318 ↗
77. Decellularized Persian walnut leaf (juglans regia) as a potential wound dressing scaffold: an experimental study10.3389/fbioe.2025.1524956 ↗
78. Compelling DNA intercalation through ‘anion–anion’ anti-coulombic interactions: boron cluster self-vehicles as promising anticancer agents10.1039/D4TB01177E ↗
79. Characterization of cellulosic fibers by FTIR spectroscopy for their further implementation to building materials10.4236/ajac.2018.96023 ↗
80. Plant-based scaffolds for tissue engineering: a review10.3390/polym17192705 ↗
81. Animal-derived products in science and current alternatives10.1016/j.bioadv.2023.213428 ↗
82. Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibres10.1016/j.compositesa.2011.03.008 ↗
83. Transitional properties of cotton fibers from cellulose I to cellulose II structure10.15376/biores.8.4.6460-6471 ↗
84. Influence of alkali treatment on mechanical and morphological properties of ananas comosus and saccharum officinarum fibers10.1088/2053-1591/ae3c61 ↗
85. Effect of alkaline concentration treatments on the chemical, physical and thermal characteristics of cellulose from tapioca solid waste10.55043/jfpc.v1i2.57 ↗
86. An integrated approach to optimizing cellulose mercerization10.3390/polym12071559 ↗
87. The effect of repeated alkali pretreatments on the morphological characteristics of cellulose from oil palm empty fruit bunch fiber-reinforced epoxy adhesive composite10.1016/j.ijadhadh.2022.103095 ↗
88. Retain strength, gain ductility: tough and transparent nanopapers by mercerisation10.1007/s10570-023-05714-7 ↗
89. Effect of alkali treatment and silane functionalization on cellulose fibers: experimental investigation, mechanism and molecular dynamics simulation10.1016/j.apsusc.2025.164716 ↗
90. Modifications of alfa fibers by alkali and hydrothermal treatment10.1007/s10570-018-2181-9 ↗
91. Extraction and characterization of biofunctional lignocellulosic fibers from pulicaria undulata plant and the effect of alkali treatment on their bio-physicochemical properties10.1016/j.carpta.2024.100542 ↗
92. Comparative study on material properties of wood-ash alkali and commercial alkali treated Sterculia fiber10.1007/s10570-022-04610-w ↗
93. Structural and thermal properties of cellulose microfiber isolated from typha Australis by sequential alkali-oxidative treatment10.1080/15440478.2021.1994094 ↗
94. FTIR analysis of cellulose treated with sodium hydroxide and carbon dioxide10.1016/j.carres.2004.11.027 ↗
95. Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of x-ray diffraction and FTIR spectroscopy10.1016/j.carres.2005.08.007 ↗
96. Pressure-mediated reconstruction of hydrogen bonding networks under ambient temperature towards high-strength cellulosic bulk materials10.1007/s10570-024-05936-3 ↗
97. Polymorphic transformation of cellulose I to cellulose II by alkali pretreatment and urea as an additive10.1016/j.carbpol.2013.02.012 ↗
98. A brief review on the effect of alkali treatment on mechanical properties of various natural fiber reinforced polymer composites10.1016/j.matpr.2020.12.117 ↗
99. Cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performance10.1186/1754-6834-3-10 ↗
100. Reference materials for the study of polymorphism and crystallinity in cellulosics10.1017/S0885715612000930 ↗