journal article·2019-10-18Open access

Development of Mixed Flow Fans with Bio-Inspired Grooves

Jinxin Wang, Toshiyuki Nakata, Hao Liu

Biomimetics· Volume 4· Issue 4

Abstract

Mixed flow fan is a kind of widely used turbomachine, which has faced problems of further performance improvement in traditional design methods in recent decades. Inspired by the microgrooves such as riblets and denticles on bird feathers and shark skins, we here propose biomimetic designs of various blades with the bio-inspired grooves, aiming at the improvement of the aeroacoustic performance. Based on a systematic study with computational fluid dynamic analyses, we found that these designs had the potential in noise suppression even with macroscopic grooves. Our best design can suppress turbulence kinetic energy by approximately 38% at the blade leading edge with aerodynamic efficiency loss of only 0.3 percentage points. This improvement is achieved by passive flow control. The vortical structures are changed in a favorable way at the leading edge due to the grooves. We believe that these biomimetic designs could provide a promising future of enhancing the performance of mixed flow fans by making grooves of ideal flow passages on the suction faces of blades in accord with the theory of pump design.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Turbulent Flows · Biomimetic flight and propulsion mechanisms · Aerodynamics and Acoustics in Jet Flows

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Graduate School of Science and Engineering, Chiba University, Chiba 263-8522, Japan

Shanghai Jiao Tong University and Chiba University International Cooperative Research Center, Dongchuan Road 800, Shanghai 200240, China

Funding

Japan Society for the Promotion of Science

References (43)

Show source-provided references
1. Evolution of water lifting devices (Pumps) over the centuries worldwide
2. Modern pumps theory and design
3. Influence of tip clearance on pressure fluctuations in an axial flow pump10.1007/s12206-016-0315-2 ↗
4. Analyzing the shape parameter effects on the performance of the mixed-flow fan using CFD & Factorial design10.1007/s12206-016-0219-1 ↗
5. Role of blade rotational angle on energy performance and pressure fluctuation of a mixed-flow pump10.1177/0957650917689948 ↗
6. Symmetrical and unsymmetrical tip clearances on cavitation performance and radial force of a mixed flow pump as turbine at pump mode10.1016/j.renene.2018.04.072 ↗
7. Tip clearance on pressure fluctuation intensity and vortex characteristic of a mixed flow pump as turbine at pump mode10.1016/j.renene.2018.06.032 ↗
8. Numerical analysis for the effect of tip clearance in a low specific speed mixed-flow pump10.1177/1687814019832222 ↗
9. Flow control
10. Modern developments in flow control10.1115/1.3101931 ↗
11. Three-dimensional suction flow control and suction jet length optimization of NACA 0012 wing10.1007/s11012-015-0100-9 ↗
12. Numerical study of blowing and suction slot geometry optimization on NACA 0012 airfoil10.1007/s12206-014-0119-1 ↗
13. Passive flow control on low-pressure turbine airfoils10.1115/1.1626685 ↗
14. Experiments with three-dimensional passive flow control devices on low-pressure turbine airfoils10.1115/1.2137743 ↗
15. Passive manipulation of separation-bubble transition using surface modifications10.1115/1.2978997 ↗
16. Passive and Active Flow Control by Swimming Fishes and Mammals10.1146/annurev.fluid.38.050304.092201 ↗
17. Owl-inspired leading-edge serrations play a crucial role in aerodynamic force production and sound suppression10.1088/1748-3190/aa7013 ↗
18. Morphology Effects of Leading-edge Serrations on Aerodynamic Force Production: An Integrated Study Using PIV and Force Measurements10.1007/s42235-018-0054-4 ↗
19. Flow structure modifications by leading-edge tubercles on a 3D wing10.1088/1748-3190/aae6fc ↗
20. Aerodynamic control of low-reynolds-number airfoil with leading-edge protuberances10.2514/1.J052319 ↗
21. Effect of Leading-Edge Serrations on Helicopter Blade–Vortex10.4050/JAHS.62.032001 ↗
22. Free-stream characteristics of bio-inspired marine rudders with different leading-edge configurations10.1016/j.oceaneng.2018.10.010 ↗
23. Cavitation observations and noise measurements of horizontal axis tidal turbines with biomimetic blade leading-edge designs10.1016/j.oceaneng.2016.05.030 ↗
24. A robust biomimetic blade design for micro wind turbines10.1016/j.renene.2018.02.093 ↗
25. Biomimetic design inspired Sharkskin denticles and modeling of diffuser for fluid control10.2494/photopolymer.31.133 ↗
26. Structure, biomimetics, and fluid dynamics of fish skin surfaces10.1103/PhysRevFluids.1.060502 ↗
27. Biomimetic drag reduction study on herringbone riblets of bird feather10.1016/S1672-6529(13)60229-2 ↗
28. Biomimetic Riblets Inspired by Sharkskin Denticles: Digitizing, Modeling and Flow Simulation10.1007/s42235-018-0088-7 ↗
29. Shark-skin surfaces for fluid-drag reduction in turbulent flow: A review10.1098/rsta.2010.0201 ↗
30. The influence of micro grooves on the parameters of the centrifugal pump impeller10.1016/j.ijmecsci.2017.01.039 ↗
31. (2019, August 30). ZIEHL-ABEGG. Available online: https://www.ziehl-abegg.com/gb/en/product-range/ventilation-systems/centrifugal-fans/zabluefin/.
32. Ishibashi, K., Naka, T., Ikeda, T., Fujii, T., and Liu, H. (2018, January 24–25). フクロウ規範型微細構造を用いた高効率・低騒音型斜流送風機の創製 (Development of efficient and silent mixed flow fan inspired by microstructure of owl wing). Proceedings of the JSME Bioengineering Conference, Koriyama, Japan.
33. Ten Years of Industrial Experience with the SST Turbulence Model
34. ANSYS CFX (2013). ANSYS CFX-Solver Theory Guide, ANSYS CFX Release.
35. ANSYS CFX (2013). ANSYS CFX Solver Modeling Guide, Release 15.0, ANSYS CFX Release.
36. Experiments on drag-reducing surfaces and their optimization with an adjustable geometry10.1017/S0022112096004673 ↗
37. Versteeg, H.K., and Malalasekera, W. (2007). An Introduction to Computational Fluid Dynamics: The Finite Volume Method, Pearson education.
38. Glegg, S., Morin, B., Atassi, O., and Reba, R. (2008, January 5–7). Using RANS calculations of turbulent kinetic energy to provide predictions of trailing edge noise. Proceedings of the 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conf, Vancouver, BC, Canada.10.2514/6.2008-2993 ↗
39. Computation of wall-pressure spectra from steady flow data for noise prediction10.2514/1.J050206 ↗
40. Comprehensive evaluation and assessment of trailing edge noise prediction based on dedicated measurements10.3397/1.3531794 ↗
41. Semi-empirical modeling of turbulent anisotropy for airfoil self-noise predictions10.2514/1.J050805 ↗
42. McMasters, J.H., and Henderson, M.L. (1979). Low-Speed Single-Element Airfoil Synthesis.
43. Yousefi, K., and Razeghi, A. (2018, January 8–12). Determination of the critical reynolds number for flow over symmetric NACA airfoils. Proceedings of the 2018 AIAA Aerospace Sciences Meeting, Kissimmee, FL, USA.10.2514/6.2018-0818 ↗