journal article·2022-11-04Open access

Effective Microorganisms and Glass Nanopowders from Waste Bottle Inclusion on Early Strength and Microstructure Properties of High-Volume Fly-Ash-Based Concrete

Ali M. Onaizi, Ghasan Fahim Huseien, Nor Hasanah A. Shukor Lim, W. C. Tang, Mohammad Alhassan, Mostafa Samadi

Biomimetics· Volume 7· Issue 4

Abstract

In concrete production, the use of high-volume fly ash (FA) as the cement substitute became interesting to achieve more sustainable and eco-friendly construction materials. However, concrete produced using high volumes of FA as cement substitute suffers from various limitations such as low strength at early ages. Considering the engineering solutions and economy of FA-included concrete, it has become vital to address such issues. In this perception, some concrete mixes were designed using more abundant and low-cost local waste materials such as waste glass bottle nanopowders (WGBNPs) and effective microorganisms (EMs) to determine the feasibility of compensating for the strength loss at early ages due to FA inclusion. The proposed mixes contained 10% of EMs as water replacement, 50% of FA, and various percentages of WGBNPs as cement replacement. The effects of EMs and WGBNPs inclusion on the early strength and microstructure properties of the produced FA-based concrete mixes were determined. The results show that the strength indexes of the concrete at all test ages were improved due to WGBNP and EM incorporation. At almost all curing ages, the mechanical performance of the concrete made with 10% EMs and 4% WGBNPs was comparable to that of normal concrete (control mix), wherein the mix containing 6% WGBNPs outperformed the control mix. The microstructure analysis of the studied mixes revealed an increase in the hydration products, structural compactness, and homogeneity due to the synergy of WGBNPs and EMs, especially the specimen made using 10% EMs and 6% WGBNPs. It is established that the proper utilization of EMs and WGBNPs in FA-based concrete can be beneficial for waste recycling and landfill problems, thus lowering environment pollution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Microbial Applications in Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Smart Infrastructure and Innovative Construction, School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Pagoh 81310, Malaysia

Institute of Architecture and Construction, South Ural State University, Lenin Prospect 76, 454080 Chelyabinsk, Russia

School of Architecture and Built Environment, The University of Newcastle, University Drive, Callaghan, NSW 2308, Australia

Civil Engineering Department, Jordan University of Science and Technology (JUST), Irbid 22110, Jordan

Civil Engineering Department, Al Ain University (AAU), Al Ain 64141, United Arab Emirates

Funding

UTM Malaysia · UPMU

References (94)

Show source-provided references
1. Performance of sustainable alkali activated mortars containing solid waste ceramic powder
2. Algaifi, H.A., Mustafa Mohamed, A., Alsuhaibani, E., Shahidan, S., Alrshoudi, F., Huseien, G.F., and Bakar, S.A. (2021). Optimisation of GBFS, Fly Ash, and Nano-Silica Contents in Alkali-Activated Mortars. Polymers, 13.10.3390/polym13162750 ↗
3. Li, G., Zhou, C., Ahmad, W., Usanova, K.I., Karelina, M., Mohamed, A.M., and Khallaf, R. (2022). Fly Ash Application as Supplementary Cementitious Material: A Review. Materials, 15.10.3390/ma15072664 ↗
4. High-volume fly ash concrete: Analysis and application10.1061/(ASCE)1084-0680(2006)11:1(58) ↗
5. Durability properties of micro-cracked ECC containing high volumes fly ash10.1016/j.cemconres.2009.07.009 ↗
6. Enhancement of strength and durability of fly ash concrete in seawater environments: Synergistic effect of nanoparticles10.1016/j.conbuildmat.2018.07.214 ↗
7. Sustainable use of ferronickel slag fine aggregate and fly ash in structural concrete: Mechanical properties and leaching study10.1016/j.jclepro.2017.06.035 ↗
8. Role of particle fineness on engineering properties and microstructure of fly ash derived geopolymer10.1016/j.conbuildmat.2019.117294 ↗
9. Effect of fineness and replacement ratio of ground fly ash on properties of blended cement mortar10.1016/j.conbuildmat.2018.05.060 ↗
10. Prediction of compressive strength development for blended cement mortar considering fly ash fineness and replacement ratio10.1016/j.conbuildmat.2020.121532 ↗
11. Performance of high volume fly ash concrete incorporating additives: A systematic literature review10.1016/j.conbuildmat.2020.120606 ↗
12. A review on fly ash characteristics–Towards promoting high volume utilization in developing sustainable concrete10.1016/j.jclepro.2017.01.114 ↗
13. Sustainability of nanomaterials based self-healing concrete: An all-inclusive insight10.1016/j.jobe.2019.01.032 ↗
14. Microstructure and Strength Properties of Sustainable Concrete Using Effective Microorganisms as a Self-Curing Agent10.3390/su141610443 ↗
15. Properties of high-volume fly ash concrete incorporating nano-SiO210.1016/j.cemconres.2003.11.013 ↗
16. Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles10.1016/j.conbuildmat.2014.07.099 ↗
17. Effect of nanomaterials inclusion on sustainability of cement-based concretes: A comprehensive review10.1016/j.conbuildmat.2021.124850 ↗
18. Samadi, M., Shah, K.W., Huseien, G.F., and Lim, N. (2020). Influence of Glass Silica Waste Nano Powder on the Mechanical and Microstructure Properties of Alkali-Activated Mortars. Nanomaterials, 10.10.3390/nano10020324 ↗
19. Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash10.1016/j.cemconcomp.2008.02.001 ↗
20. (2013). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Standard No. ASTM C618-22).
21. Effect of waste glass fine aggregate on the strength, durability and high temperature resistance of alkali-activated fly ash and GGBFS blended mortar10.1016/j.conbuildmat.2020.120177 ↗
22. Recycling of waste glass as aggregate in cement-based materials10.1016/j.ese.2020.100064 ↗
23. Reuse of waste glass as a supplementary binder and aggregate for sustainable cement-based construction materials: A review10.1016/j.jobe.2019.101052 ↗
24. Creep behavior of concrete containing glass powder10.1016/j.compositesb.2018.11.133 ↗
25. A review of ground waste glass as a supplementary cementitious material: A focus on alkali-silica reaction10.1016/j.jclepro.2020.120180 ↗
26. Mitigation effect of waste glass powders on alkali–silica reaction (ASR) expansion in cementitious composite10.1186/s40069-018-0299-7 ↗
27. Effect of particle size and curing temperature on mechanical and microstructural properties of waste glass-slag-based and waste glass-fly ash-based geopolymers10.1016/j.jclepro.2020.122970 ↗
28. Utilization of Waste Glass Powder as a Replacement of Cement in Concrete
29. Feasibility study on concrete performance made by partial replacement of cement with nanoglass powder and fly ash10.1007/s40999-018-0352-6 ↗
30. Waste glass powder as partial replacement of cement for sustainable concrete practice10.1016/j.ijsbe.2016.10.005 ↗
31. Effect of glass powders on the mechanical and durability properties of cementitious materials10.1016/j.conbuildmat.2015.06.010 ↗
32. Utilization of waste glass powder in the production of cement and concrete10.1016/j.conbuildmat.2016.08.016 ↗
33. Waste glass powder and its effect on the fresh and mechanical properties of concrete: A state of the art review
34. Durability performance of waste granite and glass powder added concrete10.1016/j.conbuildmat.2020.119075 ↗
35. Effect of using glass powder as cement replacement on rheological and mechanical properties of cement paste10.1016/j.conbuildmat.2018.05.263 ↗
36. Preparation and mechanical characterization of engineered cementitious composites with high-volume fly ash and waste glass powder10.1016/j.jclepro.2021.130222 ↗
37. Influence of waste glass powder as a supplementary cementitious material (SCM) on physical and mechanical properties of cement paste under high temperatures10.1016/j.jclepro.2022.130778 ↗
38. Alkali-activated mortars blended with glass bottle waste nano powder: Environmental benefit and sustainability10.1016/j.jclepro.2019.118636 ↗
39. Effect of the addition of nano glass powder on the compressive strength of high volume fly ash modified concrete10.1016/j.matpr.2021.08.347 ↗
40. A review: Mechanism, materials and properties of self-curing concrete
41. Biogenic approach for concrete durability and sustainability using effective microorganisms: A review10.1016/j.conbuildmat.2020.119664 ↗
42. Development of a sustainable concrete incorporated with effective microorganism and fly Ash: Characteristics and modeling studies10.1016/j.conbuildmat.2021.122899 ↗
43. Durability performance of modified concrete incorporating fly ash and effective microorganism10.1016/j.conbuildmat.2020.120947 ↗
44. Huseien, G.F., Saleh, A.T., and Ghoshal, S.K. (2022). Effective Microorganism Solution and High Volume of Fly Ash Blended Sustainable Bio-Concrete. Biomimetics, 7.10.3390/biomimetics7020065 ↗
45. Compressive strength and microstructure properties of modified concrete incorporated effective microorganism and fly ash10.1016/j.matpr.2021.03.054 ↗
46. Ismail, N., and Saman, H.M. (2014, January 17–18). Microstructure examination and strength characteristics of effective microbed cement. Proceedings of the International Conference on Biological, Civil and Environment Engineering, Dubai, United Arab Emirates.
47. Prediction of elastic modulus and Poisson’s ratio for unsaturated concrete10.1016/j.ijsolstr.2006.06.028 ↗
48. A Preliminary study on the use of magnetic, Zamzam, and sea water as mixing water for alkali-activated slag pastes10.1016/j.conbuildmat.2019.02.162 ↗
49. Effect of shrinkage reducing admixture on new-to-old concrete interface10.1016/j.compositesb.2018.11.087 ↗
50. Effects of novel polymer-type shrinkage-reducing admixture on early age autogenous deformation of cement pastes10.1016/j.cemconres.2017.08.007 ↗
51. Study on hydration characteristics of circulating fluidized bed combustion fly ash (CFBCA)10.1016/j.conbuildmat.2020.118993 ↗
52. (2007). Standard Specification for Portland Cement (Standard No. ASTM C 150-07).
53. (2015). Standard Test Method for Slump of Hydraulic-Cement Concrete (Standard No. Standard A C143).
54. (2011). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Standard No. ASTM A C109/C109M-11).
55. (2002). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) (Standard No. ASTM C 78-02).
56. (2017). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens1 (Standard No. ASTM C496-11).
57. (2014). Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression (Standard No. Standard A C469/C469M-14).
58. Laboratory evaluation of alkali-activated mortars modified with nanosilica from glass bottle wastes10.1016/j.matpr.2021.04.471 ↗
59. Development of ecological strain-hardening cementitious composites incorporating high-volume ground-glass pozzolans10.1016/j.conbuildmat.2019.117740 ↗
60. Iqbal, D.M., Wong, L.S., and Kong, S.Y. (2021). Bio-Cementation in Construction Materials: A Review. Materials, 14.10.3390/ma14092175 ↗
61. Performance of standard grade bacterial (Bacillus subtilis) concrete
62. Influence of bacteria on the compressive strength, water absorption and rapid chloride permeability of fly ash concrete10.1016/j.conbuildmat.2011.07.042 ↗
63. Effect of ureolytic bacteria on concrete properties10.1016/j.conbuildmat.2011.04.010 ↗
64. Mohammed, S., Rahim, N., and Roslan, M. (2020, January 18–20). Effect of Effective Microorganisms (EM) on concrete performance. Proceedings of the IOP Conference Series: Earth and Environmental Science, Changsha, China.10.1088/1755-1315/476/1/012036 ↗
65. Bacterium-incorporated fly ash geopolymer: A high-performance, thermo-stable cement alternative for future construction material10.1007/s10098-019-01749-2 ↗
66. Evaluation of effects of multi-varied atmospheric curing conditions on compressive strength of bacterial (bacillus subtilis) cement mortar10.1016/j.conbuildmat.2019.05.119 ↗
67. Andrew, T.C.S., Syahrizal, I.I., and Jamaluddin, M.Y. (2012, January 28–30). Effective microorganisms for concrete (EMC) admixture–its effects to the mechanical properties of concrete. Proceedings of the Awam International Conference on Civil Engineering (AICCE’12) Geohazard Information Zonation (GIZ’12), Batu Ferringhi, Malaysia.
68. Application of bacteria in concrete: A critical review10.21809/rilemtechlett.2016.14 ↗
69. Improved strength and durability of fly ash-amended concrete by microbial calcite precipitation10.1016/j.ecoleng.2010.11.009 ↗
70. Hamzah, N., Mohd Saman, H., Baghban, M.H., Mohd Sam, A.R., Faridmehr, I., Muhd Sidek, M.N., Benjeddou, O., and Huseien, G.F. (2022). A Review on the Use of Self-Curing Agents and Its Mechanism in High-Performance Cementitious Materials. Buildings, 12.10.3390/buildings12020152 ↗
71. Huseien, G.F., Faridmehr, I., and Baghban, M.H. (2022). Self-Healing Cementitious Materials: Technologies, Evaluation Methods, and Applications, CRC Press.10.1201/9781003195764 ↗
72. Novel low-cost shrinkage-compensating admixture for ordinary Portland cement10.1016/j.conbuildmat.2019.117024 ↗
73. Halaweh, M.A. (2007). Effect of Alkalis and Sulfate on Portland Cement Systems, University of South Florida.
74. Abd Rahman, N.A., and Sam, A.R.M. (2016, January 29–31). Properties of Normal Cement Concrete Containing Effective Microorganism. Proceedings of the 11th International Civil Engineering Postgraduate Conference—The 1st International Symposium On Expertise of Engineering Design, Tokyo, Japan.
75. Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system10.1016/j.conbuildmat.2018.10.214 ↗
76. An investigation into the hydration and microstructure of cement pastes modified with glass powders10.1016/j.conbuildmat.2016.02.085 ↗
77. Assessment of high volume replacement fly ash concrete–Concept of performance index10.1016/j.conbuildmat.2012.05.009 ↗
78. Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ash10.1016/j.conbuildmat.2013.04.016 ↗
79. Statistical evaluation of the mechanical properties of high-volume class F fly ash concretes10.1016/j.conbuildmat.2013.12.077 ↗
80. Evaluation of sustainable high-volume fly ash concretes10.1016/j.cemconcomp.2010.09.020 ↗
81. Improving recycled coarse aggregate (RCA) and recycled coarse aggregate concrete (RCAC) by biological denitrification phenomenon10.1016/j.conbuildmat.2021.124338 ↗
82. An experimental study on effect of Bacillus sphaericus bacteria in crack filling and strength enhancement of concrete10.1016/j.matpr.2019.08.135 ↗
83. A critical review of waste glass powder—Multiple roles of utilization in cement-based materials and construction products10.1016/j.jenvman.2019.04.098 ↗
84. Effect of waste glass powder addition on properties of alkali-activated silica fume mortars10.1016/j.jobe.2019.101154 ↗
85. Exploring the influence of SiO2 and TiO2 nanoparticles on the mechanical properties of concrete10.1016/j.conbuildmat.2018.04.181 ↗
86. Incorporation of nano-materials in cement composite and geopolymer based paste and mortar—A review10.1016/j.conbuildmat.2017.04.206 ↗
87. Effective utilization of waste glass powder as the substitution of cement in making paste and mortar10.1016/j.conbuildmat.2018.12.017 ↗
88. Physical and mechanical properties of cementitious composites containing recycled glass powder (RGP) and styrene butadiene rubber (SBR)10.1016/j.conbuildmat.2015.12.006 ↗
89. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
90. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
91. Tobermorite/jennite-and tobermorite/calcium hydroxide-based models for the structure of CSH: Applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, Portland cement, and blends of Portland cement with blast-furnace slag, metakaolin, or silica fume10.1016/j.cemconres.2004.05.034 ↗
92. Effects of nano-silica on the strength development of geopolymer cured at room temperature10.1016/j.conbuildmat.2015.10.044 ↗
93. Quantifying dispersion of nanosilica in hardened cement matrix using a novel SEM-EDS and image analysis-based methodology10.1016/j.cemconres.2021.106524 ↗
94. Improved strength performance of rubberized Concrete: Role of ground blast furnace slag and waste glass bottle nanoparticles amalgamation10.1016/j.conbuildmat.2022.128073 ↗