Enhancing Energy Harvesting Efficiency of Flapping Wings with Leading-Edge Magnus Effect Cylinder
Source abstract
Abstract
According to the Magnus principle, a rotating cylinder experiences a lateral force perpendicular to the incoming flow direction. This phenomenon can be harnessed to boost the lift of an airfoil by positioning a rotating cylinder at the leading edge. In this study, we simulate flapping-wing motion using the sliding mesh technique in a heaving coordinate system to investigate the energy harvesting capabilities of Magnus effect flapping wings (MEFWs) featuring a leading-edge rotating cylinder. Through analysis of the flow field vortex structure and pressure distribution, we explore how control parameters such as gap width, rotational speed ratio, and phase difference of the leading-edge rotating cylinder impact the energy harvesting characteristics of the flapping wing. The results demonstrate that MEFWs effectively mitigate the formation of leading-edge vortices during wing motion. Consequently, this enhances both lift generation and energy harvesting capability. MEFWs with smaller gap widths are less prone to induce the detachment of leading-edge vortices during motion, ensuring a higher peak lift force and an increase in the energy harvesting efficiency. Moreover, higher rotational speed ratios and phase differences, synchronized with wing motion, can prevent leading-edge vortex generation during wing motion. All three control parameters contribute to enhancing the energy harvesting capability of MEFWs within a certain range. At the examined Reynolds number, the optimal parameter values are determined to be a∗ = 0.0005, R = 3, and ϕ0 = 0°.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Biomimetic flight and propulsion mechanisms · Fluid Dynamics and Vibration Analysis · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
National Key Laboratory of Marine Engine Science and Technology, Shanghai 201108, China
Jiangsu Kingkind Industrial Furnace Co., Ltd., Yancheng 224100, China
Funding
Shanghai Pujiang Programmer · National Key Laboratory of Marine Engine Science and Technology · National Natural Science Foundation of China
References (31)
Show source-provided references
1. Wingmill: An oscillating-wing windmill10.2514/3.62510 ↗
2. A review on flow energy harvesters based on flapping foils10.1016/j.jfluidstructs.2014.01.002 ↗
3. Numerical investigation of the power extraction mechanism of flapping foil tidal energy harvesting devices10.1177/0958305X18787320 ↗
4. Effect of incoming gravity waves on the energy extraction efficiency of flapping wing hydroelectric generators10.1016/j.oceaneng.2022.110590 ↗
5. Numerical investigation on energy extraction of flapping hydrofoils with different series foil shapes10.1016/j.energy.2016.06.092 ↗
6. Energy extraction and hydrodynamic behavior analysis by an oscillating hydrofoil device10.1016/j.renene.2017.06.036 ↗
7. Parametric study of an oscillating airfoil in a power-extraction regime10.2514/1.26253 ↗
8. Optimal frequency for flow energy harvesting of a flapping foil10.1017/S0022112011000334 ↗
9. Optimal Operating Parameters for an Oscillating Foil Turbine at Reynolds Number 500,00010.2514/1.J052700 ↗
10. Power extraction performance of three types of flapping hydrofoils at a Reynolds number of 1.7E610.1016/j.renene.2018.07.116 ↗
11. Prototype testing of a hydrokinetic turbine based on oscillating hydrofoils10.1016/j.renene.2010.11.037 ↗
12. Insect normal hovering flight in ground effect10.1063/1.2958318 ↗
13. An investigation on the aerodynamics of a symmetrical airfoil in ground effect10.1016/j.expthermflusci.2004.09.001 ↗
14. Simulation of power extraction from tidal currents by flapping foil hydrokinetic turbines in tandem formation10.1016/j.renene.2015.04.007 ↗
15. Aerodynamic performance enhancement for flapping airfoils by co-flow jet10.1016/j.cja.2020.05.010 ↗
16. Performance and Energy Expenditure of Coflow Jet Airfoil with Variation of Mach Number10.2514/1.C033113 ↗
17. Hydrodynamic and energy extraction properties of oscillating hydrofoils with a trailing edge flap10.1016/j.apor.2021.102530 ↗
18. Tests of rotating cylinders
19. High-performance airfoil with moving surface boundary-layer control10.2514/2.2358 ↗
20. Flow control for an airfoil with leading-edge rotation: An experimental study10.2514/2.2673 ↗
21. Huda, M.N., Ahmed, T., Ahmed, T., Salam, M., Afsar, M.R., Faisal, K.M., and Ali, M.T. (2015, January 18–20). Study of NACA 0010 symmetric airfoil with leading edge rotating cylinder in a subsonic wind tunnel. Proceedings of the 11th International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh.
22. Comparative Computational Study of Double Rotating Cylinder Embedded on Selig S1223 Aerofoil and Flat Plate for High Altitude Platform10.47836/pjst.30.4.26 ↗
23. A review of the Magnus effect in aeronautics10.1016/j.paerosci.2012.07.001 ↗
24. Fluid dynamics of airfoils with moving surface boundary-layer control10.2514/3.45557 ↗
25. Separation control using moving surface effects—A numerical simulation10.2514/3.46136 ↗
26. Rotating cylinder for circulation control on an airfoil10.2514/3.48147 ↗
27. On the calculation of boundary layers along rotating cylinders10.2514/3.48154 ↗
28. Boundary-layer flows from fixed to moving surfaces including gap effects10.2514/3.48161 ↗
29. Effect of Gap between Airfoil and Embedded Rotating Cylinder on the Airfoil Aerodynamic Performance
30. Effect of freely rotating cylinder mounted near the trailing edge of the wing for boundary layer separation delay
31. Energy harvesting properties of a flapping wing with an adaptive Gurney flap10.1016/j.energy.2018.03.142 ↗