Experimental Framework for the Setup and Validation of Individualized Bone Conduction Hearing Computational Models
Source abstract
Abstract
In bone conduction (BC) hearing, sound is transmitted directly to the cochlea via skull vibrations, bypassing the outer and middle ear. This provides a therapeutic option for patients with conductive or mixed hearing loss and single-sided deafness. Although finite-element models have advanced understanding of the mechanisms underlying BC, progress toward personalized treatment strategies remains limited by a lack of standardized, experimentally validated, subject-specific models. This study proposes a hierarchical validation framework to support the development and validation of individualized computational models of the human head under BC stimulation. The framework spans four anatomical levels: system, subsystems, structures, and tissues. This approach enables systematic acquisition of data from intact cadaver heads down to isolated material domains. To demonstrate the applications of the framework, an experimental study was conducted on a single cadaver head, targeting three levels: the intact head (system), extracted bone pieces (structures), and isolated cortical layers (tissues). Subsystems were not addressed. High-resolution photon-counting computed tomography (CT) and energy-integrating cone-beam CT were used to acquire anatomical data. One-dimensional laser Doppler vibrometry was used to capture vibrational responses of bone pieces and cortical layers under wet and dry conditions. Representative results were analyzed to assess the impact of preparation state on resonance behavior. Comparative analysis showed that photon-counting CT provided superior structural resolution compared with energy-integrating cone-beam CT, particularly at the full-head (system) level. Vibrational measurements at the structure and tissue levels from the same anatomical region revealed broadly consistent resonance vibration patterns, enabling comparison of resonance frequencies. The influence of hydration state and thickness reduction on vibrational behavior was highlighted. The proposed framework provides a scalable methodology for validation of subject-specific BC models with the potential for more accurate BC simulations based on the hypothesis of functional variability rooted in anatomical variability. Obvious use cases would include the development of improved hearing aid designs and personalized treatments. In parallel, a successful correlation of anatomical and functional variability can serve as inspiration for design principles of metamaterials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ear Surgery and Otitis Media · Hearing Loss and Rehabilitation · Ultrasound Imaging and Elastography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Otorhinolaryngology, Head and Neck Surgery, University Hospital Zürich, University of Zürich, 8091 Zürich, Switzerland
Laboratory of Acoustics/Noise Control, Empa, 8600 Dübendorf, Switzerland
Funding
Swiss National Science Foundation
References (48)
Show source-provided references
1. Systematic and audiological indication criteria for bone conduction devices and active middle ear implants10.1016/j.heares.2021.108424 ↗
2. Review of bone conduction hearing devices10.3390/audiolres11020019 ↗
3. Bone-conducted sound: Physiological and clinical aspects10.1097/01.mao.0000187236.10842.d5 ↗
4. Exploration of the dynamics of otic capsule and intracochlear pressure: Numerical insights with experimental validation10.1121/10.0034859 ↗
5. A finite element model of the human head for auditory bone conduction simulation10.1159/000095273 ↗
6. Bone conduction in a three-dimensional model of the cochlea10.1159/000095283 ↗
7. 3D-finite element model of the human cochlea including fluid-structure couplings10.1159/000027688 ↗
8. Three-dimensional finite element modeling of the human external ear: Simulation study of the bone conduction occlusion effect10.1121/1.4864484 ↗
9. Kim, N., Chang, Y., and Stenfelt, S. (2014). A three-dimensional finite-element model of a human dry skull for bone-conduction hearing. BioMed Res. Int., 2014.10.1155/2014/519429 ↗
10. The development of a whole-head human finite-element model for simulation of the transmission of bone-conducted sound10.1121/1.4962443 ↗
11. Development of a finite element model of a human head including auditory periphery for understanding of bone-conducted hearing10.1016/j.heares.2021.108337 ↗
12. Simulation of the power transmission of bone-conducted sound in a finite-element model of the human head10.1007/s10237-018-1053-4 ↗
13. Characteristics of bone-conduction devices simulated in a finite-element model of a whole human head10.1177/2331216519836053 ↗
14. Gruber, P., Bruckner, D., Hellmich, C., Schmiedmayer, H.-B., Stachelberger, H., and Gebeshuber, I.C. (2011). Multiscale homogenization theory: An analysis tool for revealing mechanical design principles in bone and bone replacement materials. Biomimetics–Materials, Structures and Processes, Springer.10.1007/978-3-642-11934-7 ↗
15. A broadband viscoelastic spectroscopic study of bovine bone: Implications for fluid flow10.1114/1.1385813 ↗
16. Kohtanen, E., Mazzotti, M., Ruzzene, M., and Erturk, A. (2021). Vibration-based elastic parameter identification of the diploë and cortical tables in dry cranial bones. J. Mech. Behav. Biomed. Mater., 123.10.1016/j.jmbbm.2021.104747 ↗
17. Effect of water on nanomechanics of bone is different between tension and compression10.1016/j.jmbbm.2015.12.001 ↗
18. Variation of bone layer thicknesses and trabecular volume fraction in the adult male human calvarium10.1016/j.bone.2015.04.031 ↗
19. Influence of bone microstructure on the mechanical properties of skull cortical bone—A combined experimental and computational approach10.1016/j.jmbbm.2016.09.041 ↗
20. Individual differences in the acoustic properties of human skulls10.1121/1.5124321 ↗
21. Dependence of skull surface wave propagation on stimulation sites and direction under bone conduction10.1121/10.0000933 ↗
22. Dal Poggetto, V.F. (2023). Bioinspired acoustic metamaterials: From natural designs to optimized structures. Front. Mater., 10.10.3389/fmats.2023.1176457 ↗
23. Design and fabrication of bioinspired hierarchical dissipative elastic metamaterials10.1103/PhysRevApplied.10.024012 ↗
24. Trabecular scaffolds created using micro-CT-guided fused deposition modeling10.1016/j.msec.2006.11.010 ↗
25. Advanced porous hip implants: A comprehensive review10.1016/j.heliyon.2024.e37818 ↗
26. Validation of computational models in biomechanics10.1243/09544119JEIM649 ↗
27. Review of whole head experimental cochlear promontory vibration with bone conduction stimulation and investigation of experimental setup effects10.1177/23312165211052764 ↗
28. Verification, validation, and predictive capability in computational engineering and physics10.1115/1.1767847 ↗
29. Gray, H., and Carter, H.V. (1918). Anatomy of the Human Body, Lea & Febiger. Available online: https://commons.wikimedia.org/wiki/File:Anatomy_of_the_human_body_(1918).pdf.10.5962/bhl.title.20311 ↗
30. Lee, J., Cho, W.-H., Kong, T.H., Jung, S.-S., Han, W., Park, S., and Seo, Y.J. (2023). Contralateral bone conducted sound wave propagation on the skull bones in fresh frozen cadaver. Sci. Rep., 13.10.1038/s41598-023-38126-5 ↗
31. Direct measurement of the wavelength of sound waves in the human skull10.1121/1.4768801 ↗
32. Scanning laser Doppler vibrometry of the cranium when stimulated by a B71 bone transducer10.1016/j.apacoust.2018.07.033 ↗
33. Transmission properties of bone conducted sound: Measurements in cadaver heads10.1121/1.2005847 ↗
34. Intracochlear pressure in cadaver heads under bone conduction and intracranial fluid stimulation10.1016/j.heares.2022.108506 ↗
35. Magnitude and phase of three-dimensional (3D) velocity vector: Application to measurement of cochlear promontory motion during bone conduction sound transmission10.1016/j.heares.2018.03.022 ↗
36. Experimental investigation of promontory motion and intracranial pressure following bone conduction: Stimulation site and coupling type dependence10.1016/j.heares.2019.03.005 ↗
37. Intracochlear measurements of interaural time and level differences conveyed by bilateral bone conduction systems10.1097/MAO.0000000000001556 ↗
38. Intracochlear pressure as an objective measure for perceived loudness with bone conduction implants10.1016/j.heares.2022.108550 ↗
39. Intracochlear sound pressure measurements in normal human temporal bones during bone conduction stimulation10.1007/s10162-018-00684-1 ↗
40. Vibration characteristics of bone conducted sound in vitro10.1121/1.428314 ↗
41. Influence of the intracranial contents on the head motion under bone conduction10.1159/000537724 ↗
42. Effects of the freezing and thawing process on biomechanical properties of the human skull10.1016/j.legalmed.2013.11.005 ↗
43. Villarreal, M.R. (2025, October 27). Human Skull Side Suturas. Available online: https://commons.wikimedia.org/wiki/File:Human_skull_side_suturas.svg.
44. On the evaluation of a superpower sound processor for bone-anchored hearing10.1111/coa.12989 ↗
45. Evaluation of a super powerful bone-anchored hearing system and its users: A retrospective study10.1111/coa.14187 ↗
46. Intracochlear pressure and temporal bone motion interaction under bone conduction stimulation10.1016/j.heares.2023.108818 ↗
47. Structural analysis of the frontal and parietal bones of the human skull10.1016/j.jmbbm.2018.10.035 ↗
48. Vibration characteristics of a cantilever plate with attached spring–mass system10.1016/S0022-460X(02)00921-5 ↗