journal article·2026-04-02Open access

Integrating Biomimetic Reasoning Into Early-Stage Design Thinking for Sustainable Textile Development

Nikitas Gerolimos, Kyriaki Kiskira, Emmanouela Sfyroera, Johannis Tsoumas, Vasileios Alevizos, Sofia Plakantonaki, Maria Foka, Georgios Priniotakis

Biomimetics· Volume 11· Issue 4

Abstract

This study explores the potential of biomimetic reasoning to inform early-stage design thinking, with a focus on enhancing the consideration of material utilization and textile waste. While sustainability efforts within the field of textiles are often focused on recycling and end-of-life management strategies, it is important to recognize that a substantial proportion of final waste-related outcomes are determined during the conceptual design stage and the initial prototyping iterations. This study investigates the potential of organizational principles derived from natural systems to inform the definition of problems, the generation of ideas, and early conceptual prototyping. This is achieved by the introduction of ecological constraints and material life-cycle awareness in conjunction with user-centered requirements. To address the conceptual gap between biological forms and manufacturing, biomimicry is approached as a mode of systemic reasoning, utilizing topological skeletonization as a tool for logic extraction rather than formal imitation, with emphasis placed on continuity, modularity, and adaptive organization. This computational proof-of-concept employs a Particle Swarm Optimization (PSO) framework, utilizing biological venation as a topological guide to demonstrate how distinct organizational logics influence pattern configuration while incorporating manufacturing-inspired constraints (such as path continuity and density) as optimization penalties. The findings are exploratory in nature and are confined to the computational domain; while the study utilizes proxy indicators to simulate potential textile behaviors, it acknowledges the lack of direct experimental validation of physical fabrication as a current limitation. By framing waste as an outcome of upstream design choices, this paper contributes a methodological perspective. This perspective places biomimetic design thinking as a reflective tool within sustainable and regenerative design practice. It also supports earlier engagement with ecological considerations in textile development.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Design Education and Practice · Sustainable Design and Development · Architecture and Computational Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Industrial Design and Production Engineering Department, University of West Attica, Thivon 250 & P. Ralli Str., Attiki, 12244 Athens, Greece

Department of Learning, Informatics, Management and Ethics, Karolinska Institutet, 17177 Stockholm, Sweden

MLV Research Group, Department of Informatics, Democritus University of Thrace, 65404 Kavala, Greece

References (33)

Show source-provided references
1. Contribution of Waste Management to a Sustainable Textile Sector10.1016/j.wasman.2024.08.037 ↗
2. Transforming Textile Waste into Nanocellulose for a Circular Future10.1039/D4NR01839G ↗
3. A Mapping of Textile Waste Recycling Technologies in Europe and Spain10.3390/textiles4030022 ↗
4. Chemical Recycling of Mixed Textile Waste10.1126/sciadv.ado6827 ↗
5. Systematic Bibliographical Review and Guidelines on Additive Manufacturing/3D Printing Oriented to Sustainability: Manufatura Aditiva/Impressão 3D Direcionada À Sustentabilidade: Panorama Bibliográfico Brasileiro e Diretrizes de Aplicação10.29183/2447-3073.MIX2024.v10.n2.81-90 ↗
6. Critical Review of Methods and Models for Biodiversity Impact Assessment and Their Applicability in the Lca Context
7. Life Cycle Assessment (LCA): Informing the Development of a Sustainable Circular Bioeconomy?10.1098/rsta.2020.0352 ↗
8. Alhashim, R., Deepa, R., and Anandhi, A. (2021). Environmental Impact Assessment of Agricultural Production Using LCA: A Review. Climate, 9.10.3390/cli9110164 ↗
9. Chemical Valorization of Textile Waste: Advancing Sustainable Recycling for a Circular Economy10.1021/acsomega.4c10616 ↗
10. Seifali Abbas-Abadi, M., Tomme, B., Goshayeshi, B., Mynko, O., Wang, Y., Roy, S., Kumar, R., Baruah, B., De Clerck, K., and De Meester, S. (2025). Advancing Textile Waste Recycling: Challenges and Opportunities Across Polymer and Non-Polymer Fiber Types. Polymers, 17.10.3390/polym17050628 ↗
11. Von Thienen, J.P.A., Weinstein, T.J., and Meinel, C. (2023). Creative Metacognition in Design Thinking: Exploring Theories, Educational Practices, and Their Implications for Measurement. Front. Psychol., 14.10.3389/fpsyg.2023.1157001 ↗
12. Pei, E., and Becker, K. (2025). Design Thinking: Theory and Practice, CRC Press. [1st ed.].10.1201/9781003487524 ↗
13. Design Thinking as an Effective Method for Problem-Setting and Needfinding for Entrepreneurial Teams Addressing Wicked Problems10.1186/s13731-023-00291-2 ↗
14. Department of Clinical Medicine and Dentistry Kampala International University Uganda, and Irene, N.J. (2025). Biomimicry: Designing Sustainable Solutions from Nature. Int. Acad. Assoc. J. Biol. Sci., 13, 75–80.10.59298/IAAJB/2025/1317580 ↗
15. A Biomimicry Course in an ID Department: Nature-Driven Innovation for Food Systems10.30935/ojad/2513025 ↗
16. Alevizos, V., Yue, Z., Edralin, S., Xu, C., Gerolimos, N., and Papakostas, G.A. (2025). Coral Reef Calculus: Nature’s Equation for Pollution Control. Water, 17.10.3390/w17081210 ↗
17. Imamoglu, E. (2024). Artificial Intelligence and/or Machine Learning Algorithms in Microalgae Bioprocesses. Bioengineering, 11.10.3390/bioengineering11111143 ↗
18. Meissner, M., Schmuker, M., and Schneider, G. (2006). Optimized Particle Swarm Optimization (OPSO) and Its Application to Artificial Neural Network Training. BMC Bioinform., 7.10.1186/1471-2105-7-125 ↗
19. Ryabinin, M., Dettmers, T., Diskin, M., and Borzunov, A. (2023, January 23–29). SWARM Parallelism: Training Large Models Can Be Surprisingly Communication-Efficient. Proceedings of the 40th International Conference on Machine Learning, Honolulu, HI, USA.
20. Particle Swarm Optimization of a Hybrid Wind/Tidal/PV/Battery Energy System. Application To a Remote Area in Bretagne, France10.1016/j.egypro.2019.04.010 ↗
21. Alevizos, V., Gerolimos, N., Edralin, S., Xu, C., Simasiku, A., Priniotakis, G., Papakostas, G., and Yue, Z. (2025). Optimizing Carbon Footprint in ICT through Swarm Intelligence with Algorithmic Complexity. arXiv.
22. Alevizos, V., Gerolimos, N., Leligkou, E.A., Hompis, G., Priniotakis, G., and Papakostas, G.A. (2025). Sustainable Swarm Intelligence: Assessing Carbon-Aware Optimization in High-Performance AI Systems. Technologies, 13.10.3390/technologies13100477 ↗
23. Smart Materials: Rational Design in Biosystems via Artificial Intelligence10.1016/j.tibtech.2022.01.005 ↗
24. Effectiveness of STEM Learning Based on Design Thinking in Improving Critical Thinking Skills in Science Learning: A Meta-Analysis
25. Badarnah, L. (2025). Holistic Education for a Resilient Future: An Integrated Biomimetic Approach for Architectural Pedagogy. Biomimetics, 10.10.3390/biomimetics10060369 ↗
26. Korea Institute of Design Research Society, Moon, S.H., and Yoon, J.E. (2025). A Study on the Biomimicry Characteristics of Contemporary Architecture Based on Nature-Inspired Design. Korea Inst. Des. Res. Soc., 10, 484–496.10.46248/kidrs.2025.1.484 ↗
27. Insect-Based Industrial Symbiosis: Navigating Deep-Scaling Barriers through Holistic Biomimicry
28. Gürsu, H. (2024). An Affordable System Solution for Enhancing Tree Survival in Dry Environments. Sustainability, 16.10.3390/su16145994 ↗
29. Korea Institute of Design Research Society, Penalva Tebar, J.I., and Nah, K. (2024). Algorithmic Framework for Design Thinking: Enhancing Innovation in Complex Problem Spaces. Korea Inst. Des. Res. Soc., 9, 48–61.10.46248/kidrs.2024.4.48 ↗
30. Beyond Prisms and Cylinders: Linking Geometric Shape to Tailorable Mechanical Performance through Multi–Criteria Ranking in Additive Manufacturing10.1016/j.jmrt.2025.12.289 ↗
31. Specific Character of Objective Methods for Determining Weights of Criteria in MCDM Problems: Entropy, CRITIC and SD10.31181/dmame210402076i ↗
32. Revolutionising Textile Manufacturing: A Comprehensive Review on 3D and 4D Printing Technologies10.1186/s40691-023-00339-7 ↗
33. Kalkanis, K., Kiskira, K., Papageorgas, P., Kaminaris, S.D., Piromalis, D., Banis, G., Mpelesis, D., and Batagiannis, A. (2023). Advanced Manufacturing Design of an Emergency Mechanical Ventilator via 3D Printing—Effective Crisis Response. Sustainability, 15.10.3390/su15042857 ↗