Engineering ceramics for biomedical applications through nanofiller integration and 3D printing
Source abstract
Abstract
Abstract Known for their strength and durability, ceramic materials are often limited by their brittleness. Polymer-derived ceramics (PDCs) offer a promising alternative, enabling the fabrication of complex shapes that traditional ceramics struggle to achieve. This study introduces a cost-effective method for producing robust PDCs using low-cost liquid crystal display (LCD) 3D printing combined with strategic nanofiller integration. By incorporating nanofillers such as silicon nitride and alumina into a silicon oxycarbide precursor (SPR-684) matrix, we significantly enhanced the mechanical properties of the resultant ceramics. Optimized formulations, including a photoinitiator for vat photopolymerization, were 3D printed into complex geometries, such as gyroids and lattices, and subsequently converted to ceramics through pyrolysis. We systematically investigated the effects of varying nanofiller concentrations (0.2 to 1 wt%) on the density, microstructure, and mechanical performance of the PDC lattices. The results showed remarkable improvements, with increases of up to 2060% in toughness, 20% in stiffness, and 900% in compressive strength attributed to nanofiller integration. In terms of biocompatibility, cytotoxicity assays revealed high cell viability and proliferation on the fabricated PDC scaffolds, indicating minimal cytotoxicity and supporting cell adhesion—key attributes for tissue integration in biomedical applications. Moreover, the compressive properties of the nanofiller-enhanced ceramics closely matched those of human trabecular bone, underscoring their suitability as load-bearing bio-implants. This LCD 3D printing method offers versatility, precision, and cost-effectiveness for bioceramic fabrication, positioning these materials as promising candidates for future biomedical devices where both mechanical performance and biocompatibility are critical.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Otitoju TA et al (2020) Advanced ceramic components: materials, fabrication, and applications. J Ind Eng Chem 85:34–6510.1016/j.jiec.2020.02.002 ↗
2. Chen Y et al (2021) Porous ceramics: light in weight but heavy in energy and environment technologies. Mater Sci Eng R Rep 143:10058910.1016/j.mser.2020.100589 ↗
3. Chaudhary RP et al (2022) Additive manufacturing of polymer-derived ceramics: materials, technologies, properties and potential applications. Prog Mater Sci 128:10096910.1016/j.pmatsci.2022.100969 ↗
4. Vallachira Warriam Sasikumar P et al (2020) In vitro cytocompatibility assessment of Ti-modified, silicon-oxycarbide-based, polymer-derived, ceramic-implantable electrodes under pacing conditions. ACS Appl Mater Interfaces 12(15):17244–1725310.1021/acsami.0c01465 ↗
5. Francis A (2018) Progress in polymer-derived functional silicon-based ceramic composites for biomedical and engineering applications. Mater Res Express 5(6):06200310.1088/2053-1591/aacd28 ↗
6. Mirkhalaf M et al (2021) A comparative study of nano-fillers to improve toughness and modulus of polymer-derived ceramics. Sci Rep 11(1):695110.1038/s41598-021-82365-3 ↗
7. Mirkhalaf M et al (2023) Personalized 3D printed bone scaffolds: a review. Acta Biomater 156:110–12410.1016/j.actbio.2022.04.014 ↗
8. Eckel ZC et al (2016) Additive manufacturing of polymer-derived ceramics. Science 351(6268):58–6210.1126/science.aad2688 ↗
9. Francis A (2021) Biological evaluation of preceramic organosilicon polymers for various healthcare and biomedical engineering applications: a review. J Biomed Mater Res B Appl Biomater 109(5):744–76410.1002/jbm.b.34740 ↗
10. Lube T et al (2023) Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity. Adv Eng Mater 25(7):220052010.1002/adem.202200520 ↗
11. Jandyal A et al (2022) 3D printing–a review of processes, materials and applications in industry 4.0. Sustain Oper Comput 3:33–4210.1016/j.susoc.2021.09.004 ↗
12. Lacelle T et al (2023) Additive manufacturing of polymer derived ceramics: materials, methods, and applications. APL Mater 11(7). https://doi.org/10.1063/5.015166110.1063/5.0151661 ↗
13. Siripongpreda T et al (2023) Emerging 3D printing based on polymers and nanomaterial additives: enhancement of properties and potential applications. Eur Polymer J 184:11180610.1016/j.eurpolymj.2022.111806 ↗
14. Jiménez M et al (2019) Additive manufacturing technologies: an overview about 3D printing methods and future prospects. Complexity 2019(1):965693810.1155/2019/9656938 ↗
15. Lo Giudice A et al (2022) Evaluation of the accuracy of orthodontic models prototyped with entry-level LCD-based 3D printers: a study using surface-based superimposition and deviation analysis. Clin Oral Invest 26(1):303–31210.1007/s00784-021-03999-1 ↗
16. Karamzadeh V et al (2024) High-resolution additive manufacturing of a biodegradable elastomer with a low-cost LCD 3D printer. Adv Healthc Mater 13(9):230370810.1002/adhm.202303708 ↗
17. Wang X et al (2019) Additive manufacturing of ceramics from preceramic polymers: a versatile stereolithographic approach assisted by thiol-ene click chemistry. Addit Manuf 27:80–90
18. Quan H et al (2020) Photo-curing 3D printing technique and its challenges. Bioact Mater 5(1):110–115
19. Sim J-H et al (2022) Study on debinding and sintering processes for ceramics fabricated using digital light processing (DLP) 3D printing. Processes 10(11):2467
20. Wu Y et al (2023) Optimized fabrication of DLP-based 3D printing calcium phosphate ceramics with high-precision and low-defect to induce calvarial defect regeneration. Mater Des 233:112230
21. Wang Y, Wu T, Huang G (2024) State-of-the-art research progress and challenge of the printing techniques, potential applications for advanced ceramic materials 3D printing. Mater Today Commun 110001. https://doi.org/10.1016/j.mtcomm.2024.11000110.1016/j.mtcomm.2024.110001 ↗
22. Xia A et al (2020) Polymer-derived Si-based ceramics: recent developments and perspectives. Crystals 10(9):824
23. Zhou S et al (2020) Molecule editable 3D printed polymer-derived ceramics. Coord Chem Rev 422:21348610.1016/j.ccr.2020.213486 ↗
24. Rau AV, Knott K, Lu K (2021) Porous SiOC/SiC ceramics via an active-filler-catalyzed polymer-derived method. Materials Chemistry Frontiers 5(17):6530–654510.1039/D1QM00705J ↗
25. Soboyejo WO et al (2016) Review of high temperature ceramics for aerospace applications. Advanced Materials Research 1132:385–40710.4028/www.scientific.net/AMR.1132.385 ↗
26. Shvydyuk KO et al (2023) Review of ceramic composites in aeronautics and aerospace: a multifunctional approach for TPS. TBC and DBD Appl Ceram 6(1):195–230
27. Satapathy PS et al (2024) Introduction, history of fiber and ceramic filler-based polymer composites for biomedical applications. Fiber and ceramic filler-based polymer composites for biomedical engineering. Springer, pp 1–1710.1007/978-981-97-3909-7_1 ↗
28. Joshi AY et al (2023) Nanofillers in the biomedical industry. Handbook of nanofillers. Springer, pp 1–3310.1007/978-981-99-3516-1_53-1 ↗
29. Kumar A et al (2024) Application of 3D printing technology for medical implants: a state-of-the-art review. Advances in Materials and Processing Technologies 10(2):357–37210.1080/2374068X.2023.2193788 ↗
30. Sarvestani HY et al (2024) 3D-printed polymer-derived ceramics with tunable cellular architectures. Appl Mater Today 39:102327
31. Esfandiari P et al (2013) Efficient stabilization of thiol-ene formulations in radical photopolymerization. J Polym Sci, Part A: Polym Chem 51(20):4261–426610.1002/pola.26848 ↗
32. Akkaş HD, Öveçoğlu ML, Tanoğlu M (2004) Development of Si-OC based ceramic matrix composites produced via pyrolysis of a polysiloxane. Key Eng Mater 264:961–96410.4028/www.scientific.net/KEM.264-268.961 ↗
33. Carter DR, Hayes WC (1976) Bone compressive strength: the influence of density and strain rate. Science 194(4270):1174–117610.1126/science.996549 ↗
34. Jafari A et al (2023) Formulation and evaluation of PVA/gelatin/Carrageenan inks for 3D printing and development of tissue‐engineered heart valves. Adv Funct Mater 2305188. https://doi.org/10.1002/adfm.20230518810.1002/adfm.202305188 ↗
35. Yuan X et al (2024) Recent advances in 3D printing of smart scaffolds for bone tissue engineering and regeneration. Adv Mater 36(34):240364110.1002/adma.202403641 ↗
36. Koushik TM, Miller CM, Antunes E (2023) Bone tissue engineering scaffolds: function of multi-material hierarchically structured scaffolds. Adv Healthcare Mater 12(9):220276610.1002/adhm.202202766 ↗
37. Karamzadeh V et al (2024) Nanoporous, gas permeable PEGDA ink for 3D printing organ‐on‐a‐chip devices. Adv Funct Mater 34(28):231503510.1002/adfm.202315035 ↗