Composition-driven phase structures in laser-deposited titanium-steel composites: microstructural evolution and interfacial strengthening mechanisms
Source abstract
Abstract
Combining titanium’s excellent corrosion resistance with steel’s low cost, titanium-steel composites have shown broad application prospects in marine equipment and petrochemical engineering. However, mismatches in thermophysical properties and intensive elemental interdiffusion in titanium-steel systems readily induce the formation of brittle intermetallic compounds at the interface during laser deposition, thereby limiting interfacial reliability. Clarifying the role of titanium alloy composition in regulating interfacial reaction pathways and interfacial performance is therefore critical. In this study, a Ti-10V-2Fe-3Al coating was designed and fabricated by laser deposition, with TA1(Pure-Ti) and Ti-6Al-4V coatings used as references. The effects of alloy composition on the thermal response, interfacial microstructural evolution, and interfacial strengthening behavior were systematically investigated. The Ti-10V-2Fe-3Al coating exhibited superior interfacial microstructural stability and mechanical performance, characterized by a continuous β-Ti matrix with uniformly dispersed nanoscale α-Ti, whereas the reference coatings were dominated by coarse α-Ti. A metallurgical transition zone of approximately 200 μm formed at all interfaces, within which FeTi and Fe2Ti were identified as the dominant intermetallic phases. First-principles calculations revealed that FeTi possesses lower formation enthalpy and more favorable lattice matching than Fe2Ti, while V stabilizes the BCC FeTi structure, suppressing brittle Fe2Ti formation. Consequently, the Ti-10V-2Fe-3Al coating achieved a shear strength of 101.5 MPa, representing a 107.5 % increase compared with the TA1 coating (48.9 MPa). These results demonstrate that β-stabilized titanium alloy design provides an effective strategy for regulating titanium–steel interfacial reactions and enhancing interfacial reliability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Song D, Wang R, Wang T, Yu B, Jiang S (2024) Interface strengthening mechanism of TZM/Q235 joint by ultrasonic-assisted electron beam welding with high entropy alloy interlayer. Int J Refract Met Hard Mater 123:106772. https://doi.org/10.1016/j.ijrmhm.2024.10677210.1016/j.ijrmhm.2024.106772 ↗
2. Xie J, Xi R, Tong C, Yan JB (2023) Mechanical properties of Q235∼Q460 mild steels at low temperatures. Constr Build Mater 363:129850. https://doi.org/10.1016/j.conbuildmat.2022.12985010.1016/j.conbuildmat.2022.129850 ↗
3. Yu J, Zhang H, Wang B, Gao C, Sun Z, He P (2021) Dissimilar metal joining of Q235 mild steel to Ti6Al4V via resistance spot welding with Ni-Cu interlayer. J Mater Res Technol 15:4086–4101. https://doi.org/10.1016/j.jmrt.2021.10.03910.1016/j.jmrt.2021.10.039 ↗
4. Du J, Liu H, Wang F, Bao W, Feng N, Li H, Liu T (2024) Immersion and electrochemical corrosion properties and combined corrosion mechanism of TC4 alloy by keyhole TIG welding. J Mater Res Technol 28:2455–2465. https://doi.org/10.1016/j.jmrt.2023.12.15810.1016/j.jmrt.2023.12.158 ↗
5. Bai P, Huo P, Zhao Z, Du W, Zhang Z, Wang L (2023) Microstructure evolution and corrosion mechanism of in situ synthesized TiC/TC4 alloy nanocomposites fabricated by laser powder bed fusion. Ceram Int 49(2):2752–2764. https://doi.org/10.1016/j.ceramint.2022.09.25710.1016/j.ceramint.2022.09.257 ↗
6. Li Z, Fan L, Ma L, Duan T, Zhang H, Hou J, Sun M (2025) Perspective review on factors that influence the stress corrosion of Ti alloys for deep-sea applications. J Mater Sci Technol 222:228–249. https://doi.org/10.1016/j.jmst.2024.10.02210.1016/j.jmst.2024.10.022 ↗
7. Wang FR, Guo S, Wang YK, Xie GM (2025) Effect of tempering temperature on the microstructure and mechanical properties of Ti-6Al-4V/EH690 clad plates with stainless steel interlayer by vacuum hot rolling. Mater Sci Eng A 931:148232. https://doi.org/10.1016/j.msea.2025.14823210.1016/j.msea.2025.148232 ↗
8. Li B, He W, Chen Z, Mo T, Peng L, Li J, Liu Q (2019) Influence of annealing on the microstructure, interfacial compounds and mechanical properties of hot rolling bonded Ti/steel clad plate with bimetallic interlayered steel and vanadium. Mater Sci Eng A 764:138227. https://doi.org/10.1016/j.msea.2019.13822710.1016/j.msea.2019.138227 ↗
9. Chen H, Zhang C, Liang X, Wang C, Han J, Wang B, Wang T, Cao P (2025) Enhanced interfacial characteristics and mechanical properties of Ti/steel clad plates fabricated by explosion welding and hot rolling. J Mater Process Technol 341:118920. https://doi.org/10.1016/j.jmatprotec.2025.11892010.1016/j.jmatprotec.2025.118920 ↗
10. Zhou Q, Jia B, Guo B, Liu R, Zhu L, Bataev IA, Chen P (2022) Microstructure and mechanical properties of the bonding interface of explosively welded TA2/Q235 composite under dynamic shear loading. Int J Mech Sci 225:107362. https://doi.org/10.1016/j.ijmecsci.2022.10736210.1016/j.ijmecsci.2022.107362 ↗
11. Zhao Z, Tariq NUH, Tang J, Ren Y, Liu H, Tong M, Yin L, Du H, Wang J, Xiong T (2020) Influence of annealing on the microstructure and mechanical properties of Ti/steel clad plates fabricated via cold spray additive manufacturing and hot-rolling. Mater Sci Eng A 775:138968. https://doi.org/10.1016/j.msea.2020.13896810.1016/j.msea.2020.138968 ↗
12. Zhao Z, Tariq NUH, Tang J, Jia C, Qiu X, Ren Y, Liu H, Shen Y, Du H, Cui X, Wang J, Xiong T (2020) Microstructural evolutions and mechanical characteristics of Ti/steel clad plates fabricated through cold spray additive manufacturing followed by hot-rolling and annealing. Mater Des 185:108249. https://doi.org/10.1016/j.matdes.2019.10824910.1016/j.matdes.2019.108249 ↗
13. Yu C, Fu L, Xiao H, Lv Q, Gao B (2021) Effect of carbon content on the microstructure and bonding properties of hot-rolling pure titanium clad carbon steel plates. Mater Sci Eng A 820:141572. https://doi.org/10.1016/j.msea.2021.14157210.1016/j.msea.2021.141572 ↗
14. Bai Y, Liu X (2023) Interfacial reaction behavior of titanium/steel composite plate formed by cold-hot rolling. Mater Charact 202:113030. https://doi.org/10.1016/j.matchar.2023.11303010.1016/j.matchar.2023.113030 ↗
15. Chu Q, Zhang M, Li J, Yan C (2017) Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding. Mater Sci Eng A 689:323–331. https://doi.org/10.1016/j.msea.2017.02.07510.1016/j.msea.2017.02.075 ↗
16. Luo N, Liang H, Sun X, Fan X, Chen Y, Li X (2020) Research on the interfacial microstructure of three-layered stainless steel/Ti/low-carbon steel composite prepared by explosive welding. Compos Interfaces 28(6):609–624. https://doi.org/10.1080/09276440.2020.179475110.1080/09276440.2020.1794751 ↗
17. Wathanyu K, Tuchinda K, Daopiset S, Sirivisoot S (2022) Corrosion resistance and biocompatibility of cold-sprayed titanium on 316L stainless steel. Surf Coat Technol 445:128721. https://doi.org/10.1016/j.surfcoat.2022.12872110.1016/j.surfcoat.2022.128721 ↗
18. Li Z, Wang N, Li S, Wen L, Xu C, Su D (2023) Preparation of cold sprayed titanium TA2 coating by irregular powder and evaluation of its corrosion. Coatings 13:1894. https://doi.org/10.3390/coatings1311189410.3390/coatings13111894 ↗
19. Huang X, Zang Y, Guan B, Wang B, Cai H, Cao G (2023) Tensile instability and limit strain behavior of explosion-welded steel/Al plate considering interface defect characteristics. J Mater Res Technol 25:4842–4859. https://doi.org/10.1016/j.jmrt.2023.06.27510.1016/j.jmrt.2023.06.275 ↗
20. Zhao G, Tang Q, Guo Q, Li J, Ma L, Ma L (2024) Effect of annealing temperature on interfacial microstructure and tensile fracture behavior of titanium-steel clad plate. Mater Charact 215:114128. https://doi.org/10.1016/j.matchar.2024.11412810.1016/j.matchar.2024.114128 ↗
21. Yang X, Guo K, Wang Q, Wang Y, Zhang X, Wang Q, Liu R (2023) Interfacial complex reactions and microstructures in vacuum hot-rolling bonded titanium-steel clad composites dominated by bonding temperature. Mater Sci Eng A 885:145621. https://doi.org/10.1016/j.msea.2023.14562110.1016/j.msea.2023.145621 ↗
22. Wang P, Zhou X, Chen Z, Shi Y, Liang Y, Zhang M, Sun J, Yu Z, Xu P, Wang X, Li X (2026) Microstructure evolution and oxidation behavior of in-situ oxide-dispersion-strengthened AlCoCrFeNi2.1 composite coatings manufactured by high-speed laser cladding. J Mater Sci Technol 244:1–19. https://doi.org/10.1016/j.jmst.2025.05.01710.1016/j.jmst.2025.05.017 ↗
23. Brandau B, Hemschik R, Sousa JP, Brueckner F, Kaplan AFH (2025) Enhancing laser cladding stability: Defects and schlieren-based analytics during L-DED. Addit Manuf 103:104758. https://doi.org/10.1016/j.addma.2025.10475810.1016/j.addma.2025.104758 ↗
24. Jiang L, Cui X, Jin G, Tian Z, Wen X, Tian H, Liu E (2023) Design and characterization of a novel Cu2.3Al1.3Ni1.7SnCr0.3 multi-principal element alloy coating on magnesium alloy by laser cladding. J Mater Sci Technol 152:220–236. https://doi.org/10.1016/j.jmst.2022.11.06410.1016/j.jmst.2022.11.064 ↗
25. Tian Y, Xiao H, Ren L, Feng J, Xiao Y, Chen N, Zhou X (2022) A new strategy to fabricate Ti2AlC MAX coatings by the two-step laser method. Surf Coat Technol 448:128944. https://doi.org/10.1016/j.surfcoat.2022.12894410.1016/j.surfcoat.2022.128944 ↗
26. Gao W, Wang S, Hu K, Jiang X, Yu H, Sun D (2022) Effect of laser cladding speed on microstructure and properties of titanium alloy coating on low carbon steel. Surf Coat Technol 451:129029. https://doi.org/10.1016/j.surfcoat.2022.12902910.1016/j.surfcoat.2022.129029 ↗
27. Hu K, Jiang X, Yu H, Sun D (2024) Solidification and corrosion mechanisms: A novel metallurgical bonding Ti-6Al-4V coating on mild steel. Surf Coat Technol 476:130258. https://doi.org/10.1016/j.surfcoat.2023.13025810.1016/j.surfcoat.2023.130258 ↗
28. Roy T, Paradowska A, Abrahams R, Law M, Mutton P, Soodi M, Yan W (2020) Residual stress in laser cladded heavy-haul rails investigated by neutron diffraction. J Mater Process Technol 278:116511. https://doi.org/10.1016/j.jmatprotec.2019.11651110.1016/j.jmatprotec.2019.116511 ↗
29. Li M, Zhang J, Mi T, Zheng C, Wu D, Chen Z, Yi X (2024) Improvement mechanism of Mo element on cracks, microstructure and properties of laser cladding WC-Ni60AA coating. Surf Coat Technol 489:131047. https://doi.org/10.1016/j.surfcoat.2024.13104710.1016/j.surfcoat.2024.131047 ↗
30. Wang H, Wu M, Miao X, Jin X, Cui C (2024) TiC in-situ strengthening mechanism and crack initiation mechanism of SiC/TC4 composite coatings by laser cladding. Ceram Int 50(24):52558–52571. https://doi.org/10.1016/j.ceramint.2024.10.10710.1016/j.ceramint.2024.10.107 ↗
31. Hu K, Gao W, Wang S, Jiang X, Yu H, Sun D (2024) The relationship between an input energy density and the microstructure evolution of the Ti-6Al-4V alloy via laser remelting. Mater Charact 209:113703. https://doi.org/10.1016/j.matchar.2024.11370310.1016/j.matchar.2024.113703 ↗
32. Zhou W, Zhou Z, Zhang T, Miura T, Sun F, Nomura N (2025) Ti addition-induced simultaneous enhancement of powder properties, melting behavior, and tensile response of pure Al for laser powder bed fusion. Mater Sci Eng A 938:148458. https://doi.org/10.1016/j.msea.2025.14845810.1016/j.msea.2025.148458 ↗
33. Wang W, Chen C, Zhao R, Gludovatz B, Lu X, Zhang K, Shuai S, Hu T, Xu S, Wang J, Ren Z (2024) A laser additive manufactured metastable Ti-10V-2Fe-3Al β-titanium alloy: Microstructure, mechanical properties, and deformation mechanisms. Mater Sci Eng A 890:145863. https://doi.org/10.1016/j.msea.2023.14586310.1016/j.msea.2023.145863 ↗
34. Wang G, Wang J, Cheng K, Yang K, Zhang W (2025) Nano hierarchical hill-like structure with TA1 surface manufactured by LIPSS for anti-corrosion and anti-icing. J Mater Res Technol 35:3655–3667. https://doi.org/10.1016/j.jmrt.2025.02.07510.1016/j.jmrt.2025.02.075 ↗
35. Jha A, Shukla S, Choudhary A, Manoharan R, Muvvala G (2023) A study on developing process–structure–property relationship with molten pool thermal history during laser surface remelting of Inconel 718. Opt Laser Technol 157:108732. https://doi.org/10.1016/j.optlastec.2022.10873210.1016/j.optlastec.2022.108732 ↗
36. Xiao H, Liu X, Xiao W, Yang J, Li C, Li Y, Song L (2022) Influence of molten-pool cooling rate on solidification structure and mechanical property of laser additive manufactured Inconel 718. J Mater Res Technol 19:4404–4416. https://doi.org/10.1016/j.jmrt.2022.06.16210.1016/j.jmrt.2022.06.162 ↗
37. Kapoor K, Ravi P, Naragani D, Park JS, Almer JD, Sangid MD (2020) Strain rate sensitivity, microstructure variations, and stress-assisted β→α″ phase transformation investigation on the mechanical behavior of dual-phase titanium alloys. Mater Charact 166:110410. https://doi.org/10.1016/j.matchar.2020.11041010.1016/j.matchar.2020.110410 ↗
38. Wan Y, Song L, Zhang X, Jiang W, Xie X, Qi X (2025) Insight into the keyhole behaviour and its role on residual stress formation in vacuum electron beam welding of TC4 titanium alloy. Vacuum 232:113835. https://doi.org/10.1016/j.vacuum.2024.11383510.1016/j.vacuum.2024.113835 ↗
39. Liu C, Li Y, Gu J, Song M (2024) Phase transformation in titanium alloys: A review. Trans Nonferrous Met Soc China 34(10):3093–3117. https://doi.org/10.1016/S1003-6326(24)66597-010.1016/S1003-6326(24)66597-0 ↗
40. Lim JS, Yam FK (2025) Structural parameters of CVD synthesized Ga2O3 nanostructures from X-ray diffraction analysis derived by Scherrer, Williamson–Hall, Size–Strain Plot and Halder–Wagner methods: A comparative study. Phys B Condens Matter 699:416798. https://doi.org/10.1016/j.physb.2024.41679810.1016/j.physb.2024.416798 ↗
41. Lin C, Zhao Y, Yin G (2015) Calculation of the lattice constant of solids with the use of valence electron structure parameters. Comput Mater Sci 97:86–93. https://doi.org/10.1016/j.commatsci.2014.10.00810.1016/j.commatsci.2014.10.008 ↗
42. Meng L, Zhang Y, Zhao X, Zhang D (2021) The effects of Fe content on the microstructural evolution and tensile properties in Ti-6Al-4V-(2,4)Fe alloys fabricated by thermomechanical powder consolidation. Mater Sci Eng A 825:141877. https://doi.org/10.1016/j.msea.2021.14187710.1016/j.msea.2021.141877 ↗
43. Huang S, Zhao Q, Wu C, Lin C, Zhao Y, Jia W, Mao C (2021) Effects of β-stabilizer elements on microstructure formation and mechanical properties of titanium alloys. J Alloys Compd 876:160085. https://doi.org/10.1016/j.jallcom.2021.16008510.1016/j.jallcom.2021.160085 ↗
44. Séchepée I, Dubray C, Velay V, Matsumoto H (2024) Effects of grain size and β fraction on the deformation modes of a Ti-6Al-2Sn-4Zr-2Mo-Si alloy with equiaxed (α + β) microstructures: Slip trace analysis and multiscale simulation of polycrystal plasticity. J Alloys Compd 981:173722. https://doi.org/10.1016/j.jallcom.2024.17372210.1016/j.jallcom.2024.173722 ↗
45. Wei S, Kim J, Tasan CC (2022) In-situ investigation of plasticity in a Ti-Al-V-Fe (α + β) alloy: Slip mechanisms, strain localization, and partitioning. Int J Plast 148:103131. https://doi.org/10.1016/j.ijplas.2021.10313110.1016/j.ijplas.2021.103131 ↗
46. Zhang R, Ma Y, Qi M, Huang S, Youssef SS, Xi G, Qiu J, Lei J, Yang R, Wang P (2022) The effect of precursory α and ω phase on microstructure evolution and tensile properties of metastable β titanium alloy. J Mater Res Technol 16:912–921. https://doi.org/10.1016/j.jmrt.2021.12.06610.1016/j.jmrt.2021.12.066 ↗
47. Bhattacharyya D, Viswanathan GB, Denkenberger R, Furrer D, Fraser HL (2003) The role of crystallographic and geometrical relationships between α and β phases in an α/β titanium alloy. Acta Mater 51(16):4679–4691. https://doi.org/10.1016/S1359-6454(03)00179-410.1016/S1359-6454(03)00179-4 ↗
48. Jeong W, Yang J, Choi J et al (2025) Al-based functionally graded super-intermetallic compounds for the turbine blade of a high-performance jet engine. Adv Compos Hybrid Mater 8(6):420–443. https://doi.org/10.1007/s42114-025-01499-410.1007/s42114-025-01499-4 ↗
49. Todaro CJ, Easton MA, Qiu D, Zhang D, Bermingham MJ, Liu EW, Brandt M, StJohn DH, Qian M (2020) Grain structure control during metal 3D printing by high-intensity ultrasound. Nat Commun 11(1):142. https://doi.org/10.1038/s41467-019-13874-z10.1038/s41467-019-13874-z ↗
50. Dong R, Kou H, Zhao Y, Zhang X, Yang L, Hou H (2021) Morphology characteristics of α precipitates related to the crystal defects and the strain accommodation of variant selection in a metastable β titanium alloy. J Mater Sci Technol 95:1–9. https://doi.org/10.1016/j.jmst.2021.01.09010.1016/j.jmst.2021.01.090 ↗
51. Liu Q, Qiu C (2020) Variant selection of α precipitation in a beta titanium alloy during selective laser melting and its influence on mechanical properties. Mater Sci Eng A 784:139336. https://doi.org/10.1016/j.msea.2020.13933610.1016/j.msea.2020.139336 ↗
52. Hynowska A, Pellicer E, Fornell J, González S, van Steenberge N, Suriñach S, Gebert A, Calin M, Eckert J, Baró MD, Sort J (2012) Nanostructured β-phase Ti-31.0Fe-9.0Sn and sub-µm structured Ti-39.3Nb-13.3Zr-10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances. Mater Sci Eng C 32(8):2418–2425. https://doi.org/10.1016/j.msec.2012.07.01610.1016/j.msec.2012.07.016 ↗
53. Attar H, Ehtemam-Haghighi S, Kent D, Okulov IV, Wendrock H, Bönisch M, Volegov AS, Calin M, Eckert J, Dargusch MS (2017) Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting. Mater Sci Eng A 688:20–26. https://doi.org/10.1016/j.msea.2017.01.09610.1016/j.msea.2017.01.096 ↗
54. Song C, Ma G, He A, Li Y, Niu F, Wu D (2021) Multi-phases transformation mechanism of Ti6Al4V/Inconel 718 composite by laser additive manufacturing. Mater Charact 179:111363. https://doi.org/10.1016/j.matchar.2021.11136310.1016/j.matchar.2021.111363 ↗
55. Li W, Yan L, Karnati S, Liou F, Newkirk J, Brown Taminger KM, Seufzer WJ (2017) Ti-Fe intermetallics analysis and control in joining titanium alloy and stainless steel by laser metal deposition. J Mater Process Technol 242:39–48. https://doi.org/10.1016/j.jmatprotec.2016.11.01010.1016/j.jmatprotec.2016.11.010 ↗
56. Hao S, Su H, Zhao D, Li X, Shen Z, Liu Y, Guo Y, Zhang Z, Guo M (2025) Complex shaped Al2O3/YAG/ZrO2 eutectic ceramics with excellent high temperature mechanical properties printed by vat photopolymerization. Addit Manuf 101:104703. https://doi.org/10.1016/j.addma.2025.10470310.1016/j.addma.2025.104703 ↗
57. Qi K, Li K, Jiang L (2025) Effect of amorphous alloy on microstructure and properties of Fe90/TiN composite laser cladding coatings. Ceram Int 51(15):201103–220115. https://doi.org/10.1016/j.ceramint.2025.02.17410.1016/j.ceramint.2025.02.174 ↗
58. Ohno K, Kuwahara R, Pham TN, Bhattacharyya S, Sahara R (2022) All-proportional solid solution versus two-phase coexistence in the Ti–V alloy by first-principles phase field and SQS methods. Sci Rep 12(1):10070. https://doi.org/10.1038/s41598-022-13906-710.1038/s41598-022-13906-7 ↗
59. Gonzales-Ormeño PG, Schön CG (2009) Electron theoretical investigation of the stability of the B2-TiFe compound. J Alloys Compd 470(1–2):301–305. https://doi.org/10.1016/j.jallcom.2025.18371610.1016/j.jallcom.2025.183716 ↗
60. Miyamura H, Sakai T, Kuriyama N, Tanaka H, Uehara I, Ishikawa H (1997) Hydrogenation and phase structure of Ti-Fe-V alloys. J Alloys Compd 253–254:232–234. https://doi.org/10.1016/S0925-8388(96)03028-910.1016/S0925-8388(96)03028-9 ↗
61. Wu Y, Wu X, Qin S, Yang K (2013) Compressibility and phase transition of intermetallic compound Fe2Ti. J Alloys Compd 558:160–163. https://doi.org/10.1016/j.jallcom.2013.01.05210.1016/j.jallcom.2013.01.052 ↗
62. Hirata A, Koyama Y (2004) Crystallographic correspondence between the bcc and C14-type structures in the Fe-Ti alloy system. Mater Sci Eng A 374(1–2):72–76. https://doi.org/10.1016/j.msea.2003.12.06610.1016/j.msea.2003.12.066 ↗