Strain engineering on electrocaloric effect in PbTiO3 and BaTiO3
Source abstract
Abstract
In isothermal processes, applying the electric field to ferroelectric materials will cause the vibrational entropy change (ΔSvib) along with the corresponding adiabatic temperature change (ΔTvib) induced by the intrinsic structure response, i.e., part of the electrocaloric effect (ECE). Most previous investigations only focused on the total ECE in different materials, but we found that strain engineering can regulate the ECE significantly in the typical ferroelectrics PbTiO3 and BaTiO3. In this paper, ΔSvib and ΔTvib in PbTiO3 and BaTiO3 are extracted using first-principles calculations and the effects of strains on the ECE are then studied. The results show that the isotropic compressive and tensile strains of up to 5% could regulate the thermodynamic properties of these materials effectively. Additionally, we find that compression can cause a positive ECE, while tension can cause a negative ECE, which is further verified by the change of Born effective charge. The calculations are accelerated (> 4×) by graphics processing units (GPUs) using the Compute Unified Device Architecture (CUDA). This method thus provides a new strategy for the regulation of ΔSvib in the ECE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Zhou Y, Wu S, Ma Y, Zhang H, Zeng X, Wu F, Liu F, Ryu JE, Guo Z (2020) Recent advances in organic/composite phase change materials for energy storage. ES Energy Environ. https://doi.org/10.30919/esee8c15010.30919/esee8c150 ↗
2. Zhen Y-X, Yang M, Zhang H, Fu G-S, Wang J-L, Wang S-F, Wang R-N (2017) Ultrahigh power factors in P-type 1T-ZrX2 (X = S, Se) single layers. Sci Bull 62(22):1530–1537. https://doi.org/10.1016/j.scib.2017.10.02210.1016/j.scib.2017.10.022 ↗
3. Zhao S, Wang HW (2020) An integrated h-type method to measure thermoelectric properties of two-dimensional materials. ES Energy Environ. https://doi.org/10.30919/esee8c26210.30919/esee8c262 ↗
4. He Z, Foo M-X, Yong D, Ma T, Hao Y, Zhang H, Ding D (2019) Non-Imaging Optics for Improving Waste Heat Collection with Thermoelectrics. ES Energy Environ. https://doi.org/10.30919/esee8c33510.30919/esee8c335 ↗
5. Shi J, Han D, Li Z, Yang L, Lu S, Zhong Z, Chen J, Zhang Q, Qian X (2019) Electrocaloric cooling materials and devices for zero-global-warming-potential, high-efficiency refrigeration. Joule 3(5):1200–1225. https://doi.org/10.1016/j.joule.2019.03.02110.1016/j.joule.2019.03.021 ↗
6. Mischenko AS, Zhang Q, Scott JF, Whatmore RW, Mathur ND (2006) Giant electrocaloric effect in thin-film PbZr0.95Ti0.05O3. Science 311 (5765):1270-1271. https://doi.org/10.1126/science.112381110.1126/science.1123811 ↗
7. Neese B, Chu B, Lu SG, Wang Y, Furman E, Zhang QM (2008) Large electrocaloric effect in ferroelectric polymers near room temperature. Science 321(5890):821–823. https://doi.org/10.1126/science.115965510.1126/science.1159655 ↗
8. Luo Z, Zhang D, Liu Y, Zhou D, Yao Y, Liu C, Dkhil B, Ren X, Lou X (2014) Enhanced electrocaloric effect in lead-free BaTi1-xSnxO3 ceramics near room temperature. Appl Phys Lett 105(10):102904. https://doi.org/10.1063/1.489561510.1063/1.4895615 ↗
9. Yao Y, Zhou C, Lv D, Wang D, Wu H, Yang Y, Ren X (2012) Large piezoelectricity and dielectric permittivity in BaTiO3-xBaSnO3 system: the role of phase coexisting. Europhys Lett 98(2):27008. https://doi.org/10.1209/0295-5075/98/2700810.1209/0295-5075/98/27008 ↗
10. Li J, Chang Y, Yang S, Tian Y, Hu Q, Zhuang Y, Xu Z, Li F (2019) Lead-free bilayer thick films with giant electrocaloric effect near room temperature. Acs Appl Mater Interfaces 11(26):23346–23352. https://doi.org/10.1021/acsami.9b0627910.1021/acsami.9b06279 ↗
11. Scott JF (2011) Electrocaloric materials. Ann Rev Mater Res 41(1):229–240. https://doi.org/10.1146/annurev-matsci-062910-10034110.1146/annurev-matsci-062910-100341 ↗
12. Li X, Lu S, Chen X, Gu H, Qian X, Zhang QM (2013) Pyroelectric and electrocaloric materials. J Mater Chem C 1(1):23–37. https://doi.org/10.1039/c2tc00283c10.1039/c2tc00283c ↗
13. Pandya S, Wilbur J, Kim J, Gao R, Dasgupta A, Dames C, Martin LW (2018) Pyroelectric energy conversion with large energy and power density in relaxor ferroelectric thin films. Nat Mater 17(5):432–438. https://doi.org/10.1038/s41563-018-0059-810.1038/s41563-018-0059-8 ↗
14. Pandya S, Wilbur JD, Bhatia B, Damodaran AR, Monachon C, Dasgupta A, King WP, Dames C, Martin LW (2017) Direct measurement of pyroelectric and electrocaloric effects in thin films. Phys Rev Appl 7 (3). https://doi.org/10.1103/PhysRevApplied.7.03402510.1103/PhysRevApplied.7.034025 ↗
15. Marathe M, Grunebohm A, Nishimatsu T, Ente P, Ederer C (2016) First-principles-based calculation of the electrocaloric effect in BaTiO3: a comparison of direct and indirect methods. Phys Rev B. https://doi.org/10.1103/PhysRevB.93.05411010.1103/PhysRevB.93.054110 ↗
16. Nishimatsu TA, Barr JP, Beckman S (2013) Direct molecular dynamics simulation of electrocaloric effect in BaTiO3. J Phys Soc Japan 82(11):114605. https://doi.org/10.7566/jpsj.82.11460510.7566/jpsj.82.114605 ↗
17. Beckman SP, Wan LF, Barr JA, Nishimatsu T (2012) Effective Hamiltonian methods for predicting the electrocaloric behavior of BaTiO3. Mater Lett 89:254–257. https://doi.org/10.1016/j.matlet.2012.08.10210.1016/j.matlet.2012.08.102 ↗
18. Marathe M, Ederer C (2014) Electrocaloric effect in BaTiO3: a first-principles-based study on the effect of misfit strain. Appl Phys Lett 104(21):212902. https://doi.org/10.1063/1.487984010.1063/1.4879840 ↗
19. Barr JA, Beckman SP (2015) Electrocaloric response of KNbO3 from a first-principles effective Hamiltonian. Mater Sci Eng B 196:40–43. https://doi.org/10.1016/j.mseb.2015.02.00410.1016/j.mseb.2015.02.004 ↗
20. Tarnaoui M, Zaim N, Kerouad M, Zaim A (2020) Elastic, electronic and electrocaloric properties near room temperature in Mn-doped SnTiO3 from first-principles calculations. Ceram Int 46(14):21995–22004. https://doi.org/10.1016/j.ceramint.2020.05.14710.1016/j.ceramint.2020.05.147 ↗
21. Lisenkov S, Ponomareva I (2009) Intrinsic electrocaloric effect in ferroelectric alloys from atomistic simulations. Phys Rev B 80(14). https://doi.org/10.1103/PhysRevB.80.14010210.1103/PhysRevB.80.140102 ↗
22. Ponomareva I, Lisenkov S (2012) Bridging the macroscopic and atomistic descriptions of the electrocaloric effect. Phys Rev Lett 108(16):167604. https://doi.org/10.1103/PhysRevLett.108.16760410.1103/PhysRevLett.108.167604 ↗
23. Jiang Z, Prokhorenko S, Prosandeev S, Nahas Y, Wang D, Íñiguez J, Defay E, Bellaiche L (2017) Electrocaloric effects in the lead-free Ba(Zr,Ti)O3 relaxor ferroelectric from atomistic simulations. Phys Rev B 96(1). https://doi.org/10.1103/PhysRevB.96.01411410.1103/PhysRevB.96.014114 ↗
24. Jiang Z, Nahas Y, Prokhorenko S, Prosandeev S, Wang D, Íñiguez J, Bellaiche L (2018) Giant electrocaloric response in the prototypical Pb(Mg,Nb)O3 relaxor ferroelectric from atomistic simulations. Phys Rev B 97(10). https://doi.org/10.1103/PhysRevB.97.10411010.1103/PhysRevB.97.104110 ↗
25. Herchig R, Chang CM, Mani BK, Ponomareva I (2015) Electrocaloric effect in ferroelectric nanowires from atomistic simulations. Sci Rep 5(1). https://doi.org/10.1038/srep1729410.1038/srep17294 ↗
26. Jouzdani P, Cuozzo S, Lisenkov S, Ponomareva I (2017) Enhancement of electrocaloric response through quantum effects. Phys Rev B 96(21). https://doi.org/10.1103/PhysRevB.96.21410710.1103/PhysRevB.96.214107 ↗
27. Lisenkov S, Ponomareva I (2018) High-frequency intrinsic dynamics of the electrocaloric effect from direct atomistic simulations. Phys Rev B 97(18). https://doi.org/10.1103/PhysRevB.97.18410410.1103/PhysRevB.97.184104 ↗
28. Prosandeev S, Ponomareva I, Bellaiche L (2008) Electrocaloric effect in bulk and low-dimensional ferroelectrics from first principles. Phys Rev B 78(5). https://doi.org/10.1103/PhysRevB.78.05210310.1103/PhysRevB.78.052103 ↗
29. Liu C, Si W, Wu C, Yang J, Chen Y, Dames C (2020) The ignored effects of vibrational entropy and electrocaloric effect in PbTiO3 and PbZr0.5Ti0.5O3 as studied through first-principles calculation. Acta Mater 191:221–229. https://doi.org/10.1016/j.actamat.2020.03.05910.1016/j.actamat.2020.03.059 ↗
30. Liu C, Chen Y, Dames C (2019) Electric-field-controlled thermal switch in ferroelectric materials using first-principles calculations and domain-wall engineering. Phys Rev Appl 11(4). https://doi.org/10.1103/PhysRevApplied.11.04400210.1103/PhysRevApplied.11.044002 ↗
31. Liu C, Mishra V, Chen Y, Dames C (2018) Large thermal conductivity switch ratio in barium titanate under electric field through first-principles calculation. Adv Theory Simul 1(12):1800098. https://doi.org/10.1002/adts.20180009810.1002/adts.201800098 ↗
32. Kresse G, Furthmuller J (1996) Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys Rev B 54(16):11169–11186. https://doi.org/10.1103/PhysRevB.54.1116910.1103/PhysRevB.54.11169 ↗
33. Kresse G, Joubert D (1999) From ultrasoft pseudopotentials to the projector augmented-wave method. Phys Rev B 59(3):1758–1775. https://doi.org/10.1103/PhysRevB.59.175810.1103/PhysRevB.59.1758 ↗
34. Togo A, Tanaka I (2015) First principles phonon calculations in materials science. Scr Mater 108:1–5. https://doi.org/10.1016/j.scriptamat.2015.07.02110.1016/j.scriptamat.2015.07.021 ↗
35. Creutz M (1983) Microcanonical Monte Carlo simulation. Phys Rev Lett 50(19):1411–1414. https://doi.org/10.1103/PhysRevLett.50.141110.1103/PhysRevLett.50.1411 ↗
36. Piskunov S, Heifets E, Eglitis RI, Borstel G (2004) Bulk properties and electronic structure of SrTiO3, BaTiO3, PbTiO3 perovskites: an ab initio HF/DFT study. Comput Mater Sci 29(2):165–178. https://doi.org/10.1016/j.commatsci.2003.08.03610.1016/j.commatsci.2003.08.036 ↗
37. Benisek A, Dachs E (2015) The vibrational and configurational entropy of disordering in Cu3Au. J Alloys Compd 632:585–590. https://doi.org/10.1016/j.jallcom.2014.12.21510.1016/j.jallcom.2014.12.215 ↗
38. Rossetti GA, Maffei N (2005) Specific heat study and Landau analysis of the phase transition in PbTiO3 single crystals. J Phys Condens Matter 17(25):3953–3963. https://doi.org/10.1088/0953-8984/17/25/02110.1088/0953-8984/17/25/021 ↗
39. Todd SS, Lorenson RE (1952) Heat capacities at low temperatures and entropies at 298.16°K. of Metatitanates of Barium and Strontium. J Am Chem Soc 74(8):2043-2045. https://doi.org/10.1021/ja01128a05410.1021/ja01128a054 ↗
40. Tomeno I, Ishii Y, Tsunoda Y, Oka K (2006) Lattice dynamics of tetragonal PbTiO3. Phys Rev B 73(6). https://doi.org/10.1103/PhysRevB.73.06411610.1103/PhysRevB.73.064116 ↗
41. Bai Y, Zheng G, Shi S (2010) Direct measurement of giant electrocaloric effect in BaTiO3 multilayer thick film structure beyond theoretical prediction. Appl Phys Lett 96(19):192902. https://doi.org/10.1063/1.343004510.1063/1.3430045 ↗
42. Kar-Narayan S, Mathur ND (2010) Direct and indirect electrocaloric measurements using multilayer capacitors. J Phys D Appl Phys 43(3):032002. https://doi.org/10.1088/0022-3727/43/3/03200210.1088/0022-3727/43/3/032002 ↗
43. Li B, Zhang X, Wang JB, Zhong XL, Wang F, Zhou YC (2014) Giant electrocaloric effect of PbTiO3 thin film tuned in a wide temperature range by the anisotropic misfit strain. Mech Res Commun 55:40–44. https://doi.org/10.1016/j.mechrescom.2013.10.01610.1016/j.mechrescom.2013.10.016 ↗
44. Wang F, Li B, Ou Y, Liu LF, Peng CZ, Wang ZS, Wang W (2016) Giant room temperature elastocaloric effect of PbTiO3 ferroelectric materials with 90° domain structure. RSC Advances 6(74):70557–70562. https://doi.org/10.1039/c6ra13030e10.1039/c6ra13030e ↗
45. Ghosez P, Cockayne E, Waghmare UV, Rabe KM (1999) Lattice dynamics of BaTiO3, PbTiO3, and PbZrO3: a comparative first-principles study. Phys Rev B 60(2):836–843. https://doi.org/10.1103/PhysRevB.60.83610.1103/PhysRevB.60.836 ↗
46. Kamruzzaman M, Helal MA, Ara IE, Islam AF, Rahaman MM (2016) A comparative study based on the first principles calculations of ATiO3 (A = Ba, Ca, Pb and Sr) perovskite structure. Indian J Phys 90(10):1105–1113. https://doi.org/10.1007/s12648-016-0848-310.1007/s12648-016-0848-3 ↗
47. Horikawa T, Mikami N, Ito H, Ohno Y, Makita T, Sato K (1994) (Ba0.75Sr0.25)TiO3 films for 256 Mbit DRAM. IEICE Trans Electron E77–C (3):385-391
48. Togo A, Chaput L, Tanaka I (2015) Distributions of phonon lifetimes in Brillouin zones. Phys Rev B 91(9). https://doi.org/10.1103/PhysRevB.91.09430610.1103/PhysRevB.91.094306 ↗
49. Łodziana Z, Parliński K (2003) Dynamical stability of the α and θ phases of alumina. Phys Rev B 67(17). https://doi.org/10.1103/PhysRevB.67.17410610.1103/PhysRevB.67.174106 ↗
50. Gonze X, Charlier J, Allan DC, Teter MP (1994) Interatomic force constants from first principles: the case of α-quartz. Phys Rev B Condens Matter 50(17):13035–13038. https://doi.org/10.1103/physrevb.50.1303510.1103/physrevb.50.13035 ↗
51. Xie L (2012) Electron microscopic investigations and first-principles calculations of typical barium-based ferroelectrics and relaxor ferroelectrics. Dissertation, Tsinghua University