journal article·2020-06

Investigation on mechanical, wear, and machining characteristics of Al 7075/MWCNTs using the liquid state method

S Suresh, D Sudhakara, B Vinod

Publisher page

Abstract

In the present research work, an attempt has been made to fabricate the aluminum metal matrix composite by the stir casting method. Aluminum 7075 alloy is used as a matrix which is reinforced with multi-walled carbon nanotubes (MWCNTs) with varying percentage (0 wt.%, 1.0 wt.%, 2.0wt.%, and 3.0 wt.%). Experiments were carried out to analyze microstructure, mechanical, tribological, and machining characteristics such as microhardness, tensile strength, wear rate, coefficient of friction, material removal rate (MRR), and surface roughness (Ra). Also, the samples were studied under a scanning electron microscope (SEM), energy dispersive X-ray analysis (EDAX), and X-ray diffraction analysis (XRD) to investigate the dispersion, chemical composition, and elemental analysis of multi-walled carbon nanotubes in Al 7075. The microscopic study of metal matrix composite samples shows a good dispersion of MWCNT into Al 7075. Results show that the microhardness and tensile strength increase by 6% and 25%. The wear rate and coefficient of friction of composites are decreased by 39% and 48% at a sliding speed of 3 m/s. In addition, the metal removal rate decreases by 40% and the surface roughness enhanced by 38% respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Suresh S, Gowd GH, Kumar MD (2019) Mechanical properties of AA 7075/Al2O3/SiC nano-metal matrix composites by stir-casting method. J Inst Eng (India): Series D 100(1):43–53
2. Prakash KS, Thankachan T, Radhakrishnan R (2017) Parametric optimization of dry sliding wear loss of copper-MWCNT composites. Trans Nonferrous Metals Soc China 27(3):627–63710.1016/S1003-6326(17)60070-0 ↗
3. McGrath LM, Parnas RS, King SH, Schroeder JL, Fischer DA, Lenhart JL (2008) Investigation of the thermal, mechanical, and fracture properties of alumina-epoxy composites. Polymer 49(4):999–101410.1016/j.polymer.2007.12.014 ↗
4. Yue L, Pircheraghi G, Monemian SA, Manas-Zloczower I (2014) Epoxy composites with carbon nanotubes and graphene nanoplatelets-dispersion and synergy effects. Carbon 78:268–27810.1016/j.carbon.2014.07.003 ↗
5. Rahmanian S, Suraya AR, Shazed MA, Zahari R, Zainudin ES (2014) Mechanical characterization of epoxy composite with multiscale reinforcements: carbon nanotubes and short carbon fibers. Mat & Design 60:34–4010.1016/j.matdes.2014.03.039 ↗
6. Li W, Dichiara A, Bai J (2013) Carbon nanotube-graphene nanoplatelet hybrids as high-performance multifunctional reinforcements in epoxy composites. Compos Sci Technol 74:221–22710.1016/j.compscitech.2012.11.015 ↗
7. Zhang J, Jiang D (2011) Interconnected multi-walled carbon nanotubes reinforced polymer-matrix composites. Compos Sci Technol 71(4):466–47010.1016/j.compscitech.2010.12.020 ↗
8. Zakaria MR, Akil HM, Kudus MHA, Saleh SSM (2014) Enhancement of tensile and thermal properties of epoxy nanocomposites through chemical hybridization of carbon nanotubes and alumina. Comp Part A: App Sci Manu 66:109–11610.1016/j.compositesa.2014.07.008 ↗
9. Puchy V, Hvizdos P, Dusza J, Kovac F, Inam F, Reece MJ (2013) Wear resistance of Al2O3-CNT ceramic nanocomposites at room and high temperatures. Ceram Int 39(5):5821–582610.1016/j.ceramint.2012.12.100 ↗
10. Pujari S, Ramakrishna A, Padal KTB (2017) Comparison of ANN and regression analysis for predicting the water absorption behaviour of jute and banana fiber reinforced epoxy composites. Mat Today: Proc 4(2):1626–1633
11. Rout AK, Satapathy A (2012) Study on mechanical and tribo performance of rice-husk filled glass-epoxy hybrid composites. Mat & Design 41:131–14110.1016/j.matdes.2012.05.002 ↗
12. Sabarinathan C, Ali N, Muthu S (2013) Wear and friction behavior of epoxy/MWCNTs nanocomposites under dry sliding conditions. Curr Nanosci 9(6):766–77210.2174/15734137113099990053 ↗
13. Tian F, He CN (2011) Processing and mechanical properties of carbon nanotube-alumina hybrid reinforced high-density polyethylene composites. Mat Res Bulletin 46(7):1143–114710.1016/j.materresbull.2011.03.013 ↗
14. Wetzel B, Haupert F, Zhang MQ (2003) Epoxy nanocomposites with high mechanical and tribological performance. Compos Sci Technol 63(14):2055–206710.1016/S0266-3538(03)00115-5 ↗
15. Suresh S, Harinath Gowd G, Deva Kumar MLS (2019) Experimental investigation on mechanical properties of Al 7075/Al2O3/Mg NMMC’s by stir casting method. Sādhanā 44(2):5110.1007/s12046-018-1021-9 ↗
16. Wetzel B, Haupert F, Friedrich K, Zhang MQ, Rong MZ (2002) Impact and wear resistance of polymer nanocomposites at low filler content. Polym Eng Sci 42(9):1919–192710.1002/pen.11084 ↗
17. Zhang N, Yang F, Shen C, Castro J, Lee LJ (2013) Particle erosion on carbon nanofiber paper coated carbon fiber/epoxy composites. Comp Part B: Eng 54:209–21410.1016/j.compositesb.2013.05.003 ↗
18. Ahmad I, Kennedy A, Zhu YQ (2010) Wear-resistant properties of multi-walled carbon nanotubes reinforced Al2O3 nanocomposites. Wear 269(1-2):71–7810.1016/j.wear.2010.03.009 ↗
19. Vinod B, Ramanathan S, Anandajothi M (2018) Effect of organic and inorganic reinforcement on tribological behaviour of aluminium A356 matrix hybrid composite. J Bio-Tribo-Corrosion 4(3):4510.1007/s40735-018-0157-9 ↗
20. Brown GM, Ellyin F (2011) Mechanical properties and multiscale characterization of nanofiber-alumina/epoxy nanocomposites. J App Polymer Sci 119(3):1459–146810.1002/app.32662 ↗
21. Chen W-J, Li Y-L, Chiang C-L, Kuan C-F, Kuan H-C, Lin T-T, Yip M-C (2010) Preparation and characterization of carbon nanotubes/epoxy resin nano-prepreg for nanocomposites. J Phys Chem Solids 71(4):431–43510.1016/j.jpcs.2009.12.006 ↗
22. Vinod B, Ramanathan S, Anandajothi M (2019) A novel approach for utilization of agro-industrial waste materials as reinforcement with Al-7Si-0.3 Mg matrix hybrid composite on tribological behaviour. SN App Sci 1(1):6210.1007/s42452-018-0066-z ↗
23. Rout AK, Satapathy A (2012) Study on mechanical and trio performance of rice-husk filled glass-epoxy hybrid composites. Mat & Design 41:131–14110.1016/j.matdes.2012.05.002 ↗
24. Yu C-R, Wu D-M, Liu Y, Qiao H, Yu Z-Z, Dasari A, Du X-S, Mai Y-W (2011) Electrical and dielectric properties of polypropylene nanocomposites based on carbon nanotubes and barium titanate nanoparticles. Compos Sci Technol 71(15):1706–171210.1016/j.compscitech.2011.07.022 ↗
25. Yu J-G, Jiang X-Y, D-m Z, Chen X-Q, Jiao F-P, Peng Z-G (2013) Preparation and characterization of diiodocarbene functionalized multi-walled carbon nanotubes. Curr Nanosci 9(1):89–92
26. Li W, Dichiara A, Zha J, Su Z, Bai J (2014) On improvement of mechanical and thermo-mechanical properties of glass fabric/epoxy composites by incorporating CNT-Al2O3 hybrids. Compos Sci Technol 103:36–4310.1016/j.compscitech.2014.08.016 ↗
27. Suresh S, Harinath Gowd G, Deva Kumar MLS (2019) Mechanical and wear characterization of Al/nano-SiC NMMCs by liquid state process. J Bio-Tribo-Corrosion 5(2):310.1007/s40735-019-0232-x ↗