journal article·2015-11

The role of steam treatment on the structure, purity and length distribution of multi-walled carbon nanotubes

Laura Cabana, Xiaoxing Ke, Dejan Kepić, Judith Oro-Solé, Ester Tobías-Rossell, Gustaaf Van Tendeloo, Gerard Tobias

Carbon· Volume 93
Publisher page

Abstract

Abstract Purification and shortening of carbon nanotubes have attracted a great deal of attention to increase the biocompatibility and performance of the material in several applications. Steam treatment has been employed to afford both purification and shortening of multi-walled carbon nanotubes (MWCNTs). Steam removes the amorphous carbon and the graphitic particles that sheath catalytic nanoparticles, facilitating their removal by a subsequent acidic wash. The amount of metal impurities can be reduced in this manner below 0.01 wt.%. The length distribution of MWCNTs after different steam treatment times (from 1 h to 15 h) was assessed by box plot analysis of the electron microscopy data. Samples with a median length of 0.57 μm have been prepared with the reported methodology while preserving the integrity of the tubular wall structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Nanopore and Nanochannel Transport Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. In vivo immunological toxicity in mice of carbon nanotubes with impurities10.1016/j.carbon.2009.01.028 ↗
2. Oops they did it again! Carbon nanotubes hoax scientists in viability assays10.1021/nl060177c ↗
3. Influence of Nanoparticles on Blood–Brain Barrier Permeability and Brain Edema Formation in Rats
4. Carbon nanotubes contain metal impurities which are responsible for the “electrocatalysis” seen at some nanotube-modified electrodes10.1002/anie.200600033 ↗
5. The electrocatalytic properties of Arc-MWCNTs and associated ‘carbon onions’10.1002/elan.200704079 ↗
6. Nanographite impurities dominate electrochemistry of carbon nanotubes10.1002/chem.201001584 ↗
7. Carbon nanotubes can exhibit negative effects in electroanalysis due to presence of nanographite impurities10.1016/j.elecom.2011.02.011 ↗
8. Inherent carbonaceous impurities on arc-discharge multiwalled carbon nanotubes and their implications for nanoscale interfaces10.1016/j.carbon.2014.07.069 ↗
9. Removal of amorphous carbon for the efficient sidewall functionalisation of single-walled carbon nanotubes10.1039/b712614j ↗
10. Purification of multi-walled carbon nanotubes through microwave heating of nitric acid in a closed vessel10.1016/j.carbon.2004.10.042 ↗
11. Non-destructive purification of multi-walled carbon nanotubes produced by catalyzed CVD10.1016/S0167-577X(02)00863-7 ↗
12. Room temperature purification of few-walled carbon nanotubes with high yield10.1021/nn800388g ↗
13. An easy method for purifying multi-walled carbon nanotubes by chlorine oxidation10.1016/j.carbon.2008.05.003 ↗
14. Steaming multiwalled carbon nanotubes via acid vapour for controllable nanoengineering and the fabrication of carbon nanoflutes10.1039/c1cc10525f ↗
15. The superiority of air oxidation over liquid-phase oxidative treatment in the purification of carbon nanotubes10.1016/j.carbon.2011.03.023 ↗
16. Purification of nanotubes10.1038/367519a0 ↗
17. Purification and opening of carbon nanotubes using steam10.1021/jp0631883 ↗
18. Carbon dioxide plasma as a versatile medium for purification and functionalization of vertically aligned carbon nanotubes10.1021/jp5027515 ↗
19. Purification of carbon nanotubes by high temperature chlorine gas treatment10.1039/c3cp50348h ↗
20. New method of purification of carbon nanotubes based on hydrogen treatment10.1021/jp048737o ↗
21. Plasma-thermal purification and annealing of carbon nanotubes10.1016/j.carbon.2012.04.049 ↗
22. Comparative studies on acid and thermal based selective purification of HiPCO produced single-walled carbon nanotubes10.1016/j.cplett.2004.01.067 ↗
23. Steam purification for the removal of graphitic shells coating catalytic particles and the shortening of single-walled carbon nanotubes10.1002/smll.200701283 ↗
24. An efficient strategy for the purification of cloth-like single walled carbon nanotube soot produced by arc discharge10.1016/j.carbon.2010.06.039 ↗
25. Controlled etching of carbon nanotubes by iron-catalyzed steam gasification10.1002/adma.200700763 ↗
26. Optimisation of performance through electrode formulation in conversion materials for lithium ion batteries: Co3O4 as a case example10.1016/j.jpowsour.2012.04.005 ↗
27. Scaleable ultra-thin and high power density graphene electrochemical capacitor electrodes manufactured by aqueous exfoliation and spray deposition10.1016/j.carbon.2012.09.035 ↗
28. Layer-by-layer spray deposition and unzipping of single-wall carbon nanotube-based thin film electrodes for electrochemical capacitors10.1016/j.carbon.2013.04.107 ↗
29. Fabrication of carbon-nanotube-reinforced glass-ceramic nanocomposites by ultrasonic in situ sol-gel processing10.1039/b809369e ↗
30. Synthesis of PbI2 single-layered inorganic nanotubes encapsulated within carbon nanotubes10.1002/adma.201305169 ↗
31. Towards nanomedicines: design protocols to assemble, visualize and test carbon nanotube probes for multi-modality biomedical imaging
32. Magnetically decorated multiwalled carbon nanotubes as dual MRI and SPECT contrast agents10.1002/adfm.201302892 ↗
33. Are carbon nanotubes a natural solution? Applications in biology and medicine10.1021/am302902d ↗
34. Filled carbon nanotubes in biomedical imaging and drug delivery10.1517/17425247.2015.971751 ↗
35. Paste electrode based on short single-walled carbon nanotubes and room temperature ionic liquid: preparation, characterization and application in DNA detection10.1002/elan.200704190 ↗
36. Very short functionalized carbon nanotubes for membrane applications10.1016/j.desal.2009.09.130 ↗
37. Preparation of short carbon nanotubes and application as an electrode material in Li-ion batteries10.1002/adfm.200700319 ↗
38. Effect of ball milling on morphology of cup-stacked carbon nanotubes10.1016/S0009-2614(02)00248-8 ↗
39. Lithographically cut single-walled carbon nanotubes: controlling length distribution and introducing end-group functionality10.1021/nl034219y ↗
40. Cutting single-wall carbon nanotubes through fluorination10.1021/nl025675+ ↗
41. Cap removal and shortening of double-walled and very-thin multi-walled carbon nanotubes under mild oxidative conditions10.1016/j.carbon.2008.10.049 ↗
42. Water-assisted highly efficient synthesis of impurity-free single-walled carbon nanotubes10.1126/science.1104962 ↗
43. Revealing the secret of water-assisted carbon nanotube synthesis by microscopic observation of the interaction of water on the catalysts10.1021/nl801981m ↗
44. Role of water in super growth of single-walled carbon nanotube carpets10.1021/nl801876h ↗
45. Towards an ultrasensitive method for the determination of metal impurities in carbon nanotubes10.1002/smll.200800125 ↗
46. Cornell · 2004
47. Finite-size effects in fine particles: magnetic and transport properties
48. Carbon nanotubes contain residual metal catalyst nanoparticles even after washing with nitric acid at elevated temperature because these metal nanoparticles are sheathed by several graphene sheets10.1021/la070088v ↗
49. Purification and characterization of single-wall carbon nanotubes10.1021/jp003453z ↗
50. Quantitative assessment of the amount of material encapsulated in filled carbon nanotubes10.1021/jp810717b ↗
51. Kinetics of carbon nanotube oxidation10.1039/B609218G ↗
52. Soft cutting of single-wall carbon nanotubes by low temperature ultrasonication in a mixture of sulfuric and nitric acids10.1088/0957-4484/23/49/495714 ↗
53. Ball-milling modification of single-walled carbon nanotubes: purification, cutting, and functionalization10.1002/smll.201001917 ↗
54. Brown NMD. High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs10.1016/j.carbon.2004.08.033 ↗
55. Raman and IR spectroscopy of chemically processed single-walled carbon nanotubes10.1021/ja052951o ↗
56. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
57. Raman spectroscopy on amorphous carbon films10.1063/1.362745 ↗
58. Raman spectroscopic characterization of some commercially available carbon black materials10.1016/0008-6223(95)00117-V ↗
59. Raman microprobe studies on carbon materials10.1016/0008-6223(94)90148-1 ↗
60. Novel method of evaluating the purity of multiwall carbon nanotubes using raman spectroscopy10.1155/2013/615915 ↗
61. Observations of the D-band feature in the Raman spectra of carbon nanotubes10.1103/PhysRevB.64.073403 ↗
62. Study of the interface between rhodium and carbon nanotubes10.1021/nn9015955 ↗
63. Measuring point defect density in individual carbon nanotubes using polarization-dependent X-ray microscopy10.1021/nn1002248 ↗
64. In situ observations of self-repairing single-walled carbon nanotubes10.1103/PhysRevB.81.201401 ↗
65. The identification of inner tube defects in double-wall carbon nanotubes10.1002/smll.201201625 ↗
66. Atomic-scale detection of organic molecules coupled to single-walled carbon nanotubes10.1021/ja069080i ↗
67. Enhancement of adsorption inside of single-walled nanotubes: opening the entry ports10.1016/S0009-2614(00)00341-9 ↗