Nanoporous carbon-composites as gas sensors: Importance of the specific adsorption forces for ammonia sensing mechanism
Source abstract
Abstract
Abstract Wood-based/polymer-derived nanoporous carbon composites were tested as ammonia sensors for gas concentrations from 45 to 500 ppm. A synergy between the composite components affected their electrical response. Incorporation of only a 1% polymer-derived carbon phase was sufficient to convert the conduction type of the carbon matrix and to increase the sensitivity. An increase in the amount of the polymer-derived carbon phase (10 and 25%) in the composites decreased the electrical signals. This was linked to a decrease in the porosity and thus to a decrease in the contribution of physical adsorption to a sensing mechanism. The reversible sensing of the carbon-coated chips was governed by weak physical interactions of ammonia with surface functional groups and by a charge transport through ionic conductivity (NH4+). The results suggested that the nature of the weak interactions rather than the electronic properties of the carbon matrix is responsible for the electrical performance in gas sensing. Based on the results obtained, a priority order of the importance of various surface functional groups for the ammonia sensing capability of nanoporous carbons is proposed for the first time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Ammonia sensors and their applications—a review10.1016/j.snb.2004.11.054 ↗
2. Toxicological Profile for Ammonia · 2004
3. Ammonia sensors based on metal oxide nanostructures10.1088/0957-4484/18/20/205504 ↗
4. Semiconducting metal oxide based sensors for selective gas pollutant detection10.3390/s91008158 ↗
5. Gas sensors based on conducting polymers10.3390/s7030267 ↗
6. Chemically reduced graphene oxide for ammonia detection at room temperature10.1021/am4019109 ↗
7. Ammonia gas sensors based on chemically reduced graphene oxide sheets self-assembled on Au electrodes10.1186/1556-276X-9-251 ↗
8. Highly sensitive, room temperature gas sensor based on polyaniline-multiwalled carbon nanotubes (PANI/MWCNTs) nanocomposite for trace-level ammonia detection10.1016/j.snb.2015.08.002 ↗
9. Reduced graphene oxide–polyaniline hybrid: preparation, characterization and its applications for ammonia gas sensing10.1039/c2jm34340a ↗
10. Thermally reduced kaolin-graphene oxide nanocomposites for gas sensing10.1038/srep07676 ↗
11. Improved selectivity and sensitivity of gas sensing using a 3D reduced graphene oxide hydrogel with an integrated microheater10.1021/acsami.5b09695 ↗
12. Ammonia gas sensor based on aniline reduced graphene oxide10.4028/www.scientific.net/AMR.669.79 ↗
13. Uniform decoration of silver nanoparticle on exfoliated graphene oxide sheets and its ammonia gas detection10.1016/j.ceramint.2015.09.138 ↗
14. Ammonia gas sensing behavior of graphene surface decorated with gold nanoparticles10.1016/j.sse.2012.05.059 ↗
15. Graphene-oxide nano composites for chemical sensor applications
16. Enhanced ammonia sensing at room temperature with reduced graphene oxide/tin oxide hybrid film10.1039/C5RA06696D ↗
17. Ammonia sensor based on polypyrrole–graphene nanocomposite decorated with titania nanoparticles10.1016/j.ceramint.2015.01.081 ↗
18. Metallic nanoparticles functionalizing carbon nanotube networks for gas sensing applications10.1088/0957-4484/25/5/055208 ↗
19. Insight into ammonia sensing on heterogeneous S- and N- co-doped nanoporous carbons10.1016/j.carbon.2015.10.049 ↗
20. Activated carbon-based gas sensors: effects of surface features on the sensing mechanism10.1039/C4TA06161F ↗
21. Nitrogen-doped activated carbon-based ammonia sensors: effect of specific surface functional groups on carbon electronic properties10.1021/acssensors.6b00093 ↗
22. Nanoporous carbons as gas sensors: exploring the surface sensitivity10.1016/j.carbon.2014.08.055 ↗
23. Recent progress in carbon nanotube-based gas sensors10.1088/0957-4484/19/33/332001 ↗
24. Improving gas sensing properties of graphene by introducing dopants and defects: a first principles study10.1088/0957-4484/20/18/185504 ↗
25. Combined effect of nitrogen- and oxygen-containing functional groups of microporous activated carbon on its electrochemical performance in supercapacitors10.1002/adfm.200801236 ↗
26. Nitrogen-doped carbon monolith for alkaline supercapacitors and understanding nitrogen-induced redox transitions10.1002/chem.201102806 ↗
27. Nanoporous nitrogen-containing coal for electrodes of supercapacitors
28. Heavily nitrogen doped, graphene supercapacitor from silk cocoon10.1016/j.electacta.2015.02.019 ↗
29. Synthesis and characterization of nitrogen-doped graphene hydrogels by hydrothermal route with urea as reducing-doping agents10.1039/C2TA00887D ↗
30. Heteroatom-doped graphitic carbon catalysts for efficient electrocatalysis of oxygen reduction reaction10.1021/acscatal.5b01563 ↗
31. Remarkable conversion between n- and p-type reduced graphene oxide on varying the thermal annealing temperature10.1021/acs.chemmater.5b02999 ↗
32. Chemically modified graphene and nitrogen-doped graphene: electrochemical characterisation and sensing applications10.1016/j.electacta.2013.10.080 ↗
33. Nitrogen-doped graphene: efficient growth, structure, and electronic properties10.1021/nl2031037 ↗
34. Oxygen molecule dissociation on carbon nanostructures with different types of nitrogen doping10.1039/C1NR11086A ↗
35. Nitrogen-doped graphene and its application in electrochemical biosensing10.1021/nn100315s ↗
36. On the reactive adsorption of ammonia on activated carbons modified by impregnation with inorganic compounds10.1016/j.jcis.2009.06.039 ↗
37. The role of sulfur-containing groups in ammonia retention on activated carbons10.1016/j.carbon.2009.10.007 ↗
38. Effect of the position of reaction-site in amphipathic-type thioester in aqueous amidation reaction10.4236/aces.2015.53032 ↗
39. Semiconducting properties of oxide and passive films formed on AISI 304 stainless steel and alloy10.1590/S0103-50532002000400005 ↗
40. Synthesis of π-conjugated polymers bearing electronic and optical functionalities by organometallic polycondensations and their chemical properties10.1016/j.polymer.2007.07.051 ↗
41. Improved gas sensing of electrospun carbon fibers based on pore structure, conductivity and surface modification10.1016/j.carbon.2010.03.045 ↗
42. Sensing of NH3 on heterogeneous nanoporous carbons in the presence of humidity10.1016/j.carbon.2015.12.091 ↗
43. Sorting semiconducting single walled carbon nanotubes by poly(9,9-dioctylfluorene) derivatives and application for ammonia gas sensing10.1016/j.carbon.2015.07.072 ↗
44. Sensitive detection of ammonia by reduced graphene oxide/polypyrrole nanocomposites10.1016/j.synthmet.2015.02.026 ↗
45. Development and improvement of carbon nanotube-based ammonia gas sensors using ink-jet printed interdigitated electrodes10.1109/TNANO.2013.2242203 ↗
46. Carboxyl functionalized gold nanoparticles in situ grown on reduced graphene oxide for micro-gravimetric ammonia sensing10.1016/j.snb.2014.06.029 ↗
47. Hubálek, j. Sensing properties of multiwalled carbon nanotubes grown in MW plasma torch: electronic and electrochemical behavior, gas sensing, Field emission, IR absorption10.3390/s150202644 ↗
48. Adsorption kinetics of ammonia sensing by graphene films decorated with platinum nanoparticles adsorption kinetics of ammonia sensing by graphene films decorated with platinum nanoparticles10.1063/1.4714552 ↗
49. High sensitivity gas detection using a macroscopic three-dimensional graphene foam network10.1038/srep00166 ↗
50. Preparation, characterization and NH3-sensing properties of reduced graphene oxide/copper phthalocyanine hybrid material10.1016/j.snb.2013.11.090 ↗
51. Electrochemically functionalized single-walled carbon nanotube gas sensor10.1002/elan.200603527 ↗