Interfacial reactions in SiCf/C/Ti17 composites dominated by texture of carbon coatings
Source abstract
Abstract
Abstract Two kinds of turbostratic carbon coatings with different texture were deposited on SiC fibers using single filament chemical vapor deposition by changing substrate temperature: 920 and 1000 °C, labeled as C920 and C1000, respectively, followed by coating Ti17 matrix, and then SiCf/C920/Ti17 and SiCf/C1000/Ti17 composites were fabricated by hot isostatic pressing (HIP). C1000 possesses much stronger texture than C920, evidenced by combined tests of X-ray photoelectron spectrum, Raman spectroscopy and transmission electron microscope (TEM). Interfacial reactions of SiCf/C920/Ti17 and SiCf/C1000/Ti17 composites are found to depend strongly on texture of turbostratic carbon coatings after HIP, revealing that C1000 with stronger texture can hinder the outward diffusion of C and inward diffusion of matrix elements more efficiently than C920, which is elucidated by the results of scanning electron microscope, TEM and energy-dispersive spectroscopy. Interdiffusion between C coating and Ti17 matrix results in formation of C gradient distribution in interfacial reaction layer for both composites, in which interfacial zone of fiber and matrix can be described as turbostratic C||amorphous C||fine-grained TiC||transition TiC||coarse-grained TiC, however, each sub-layer thickness is determined by the texture of C coating. Based on these results, the model of interfacial reactions dominated by texture of C coatings was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Kinetics and mechanism of interfacial reaction in a SiCf/Ti composite
2. Tensile properties of duplex metal-coated SiC fiber and titanium alloy matrix composites10.1007/s11661-999-0142-5 ↗
3. Evaluation of the efficiency of TiB2 and TiC as protective coatings for SiC monofilament in titanium-based composites10.1007/BF00357348 ↗
4. Development of a diffusion barrier for SiC monofilaments in titanium10.1016/0921-5093(91)90552-X ↗
5. Functionally graded coatings on SiC fibres for protection in Ti-based metal matrix composites10.1016/1359-6462(96)00052-8 ↗
6. Effect of TiB2, TiC and TiN protective coatings on tensile strength and fracture behaviour of SiC monofilament fibres10.1016/0010-4361(95)92618-M ↗
7. The CVD of TiB2 protective coating on SiC monofilament fibres
8. Effect of Cu/Mo duplex coating on the interface and property of SiCf/Ti6Al4V composite10.1016/j.msea.2011.12.029 ↗
9. Interfacial reaction in SiCf/Ti-6Al-4V composite by using transmission electron microscopy10.1016/j.matchar.2015.09.023 ↗
10. Effects of the coating system and interfacial region thickness on the thermal residual stresses in SiCf/Ti–6Al–4V composites10.1016/j.matdes.2008.05.013 ↗
11. Effect of C coating on the interfacial microstructure and properties of SiC fiber-reinforced Ti matrix composites10.1016/j.msea.2006.04.029 ↗
12. Continuous fiber reinforced titanium matrix composites: fabrication, properties, and applications10.1002/adem.200310093 ↗
13. Silicon carbide filaments: Microstructure10.1007/BF01112277 ↗
14. The structure of carbon in chemically vapor deposited SiC monofilaments10.1557/JMR.1990.2865 ↗
15. Microstructural and mechanical characterization of carbon coatings on silicon carbide fibers10.1557/JMR.2001.0465 ↗
16. Separation of the sp3 and sp2 components in the C1s photoemission spectra of amorphous carbon films10.1103/PhysRevB.54.8064 ↗
17. Synthesis and analysis of thin conducting pyrolytic carbon films10.1016/j.carbon.2011.10.036 ↗
18. XPS studies of graphite electrode materials for lithium ion batteries10.1016/S0169-4332(00)00525-0 ↗
19. Direct evaluation of the sp3 content in diamond-like-carbon films by XPS10.1016/S0169-4332(98)00319-5 ↗
20. Deposition of graphene by sublimation of pyrolytic carbon10.1007/s11082-014-0015-z ↗
21. General equation for the determination of the crystallite size La of nanographite by Raman spectroscopy10.1063/1.2196057 ↗
22. Characterization of carbon coatings on SiC monofilaments using Raman spectroscopy10.1007/s10853-006-1265-3 ↗
23. Fluidized bed chemical vapor deposition of pyrolytic carbon – I. Effect of deposition conditions on microstructure10.1016/j.carbon.2008.10.023 ↗
24. Fluidized bed chemical vapor deposition of pyrolytic carbon – II. Effect of deposition conditions on anisotropy10.1016/j.carbon.2008.10.003 ↗
25. Raman spectroscopy of polyconjugated molecules and materials: confinement effect in one and two dimensions10.1098/rsta.2004.1448 ↗
26. Fluidized bed chemical vapor deposition of pyrolytic carbon-III. Relationship between microstructure and mechanical properties10.1016/j.carbon.2015.05.009 ↗
27. Raman scattering of laser-deposited amorphous carbon10.1103/PhysRevB.47.10931 ↗
28. Raman spectroscopic characterization of some commercially available carbon black materials10.1016/0008-6223(95)00117-V ↗
29. Full width at half maximum intensity of the G band in the first order Raman spectrum of carbon material as a parameter for graphitization10.1016/j.carbon.2006.05.020 ↗
30. On the terminology for pyrolytic carbon10.1016/S0008-6223(01)00282-2 ↗
31. Consideration of reaction mechanisms leading to pyrolytic carbon of different textures10.1016/S0008-6223(02)00174-4 ↗
32. Microstructural characterization of interface in SiC fiber-reinforced Ti–15V–3Cr–3Al–3Sn matrix composite10.1016/S0921-5093(97)00737-5 ↗
33. Chemical interaction between sigma 1140+ SiC fibre and Ti-6Al-4V10.1016/S1359-6462(00)00649-7 ↗
34. Raman investigation of chemical reaction product in thermal-treated SiCf/C/Mo/Ti6Al4V composite10.1002/jrs.4615 ↗
35. The design of an ephemeral interfacial zone for titanium matrix composites10.1016/S1359-835X(98)00009-8 ↗
36. Friction performance of C/C composites prepared using rapid directional diffused chemical vapor infiltration processes10.1016/S0008-6223(01)00283-4 ↗
37. Influence of pressure, temperature and surface area/volume ratio on the texture of pyrolytic carbon deposited from methane10.1016/S0008-6223(02)00403-7 ↗
38. Microstructure evolution of C/Mo double-coated SiC fiber reinforced Ti6Al4V composites10.1016/j.msea.2013.12.077 ↗
39. Microstructure and grain growth of the matrix of SiCf/Ti–6Al–4V composites prepared by the consolidation of matrix-coated fibers in the β phase field
40. Characterization of microstructure and mechanical behavior of sputter deposited Ti-containing amorphous carbon coatings10.1016/S0257-8972(01)01380-9 ↗
41. Raman investigation of interfacial reaction product of SiCf/Ti43Al9V composite10.1111/jace.13545 ↗
42. Solid-state fabrication and interfaces of fibre reinforced metal matrix composites10.1016/0079-6425(95)00002-X ↗
43. Processing and interface stability of SiC fiber reinforced Ti–15V–3Cr matrix composites10.1016/S0924-0136(00)00473-8 ↗
44. Investigation of interfacial reaction in SiC fiber reinforced Ti-43Al-9V composites10.1016/j.intermet.2012.09.025 ↗
45. Physicochemical processes at metal-ceramic interfaces10.1016/B978-0-08-040505-6.50016-7 ↗
46. Frost · 1982
47. Elevated temperature fiber push-out testing
48. Interphase behavior of titanium matrix composites at elevated temperature10.1016/S1359-835X(00)00082-8 ↗
49. Characterization of interface sliding damage in SiC fiber-reinforced Ti-15-3 matrix composite by cyclic fatigue10.1016/S1359-6454(96)00356-4 ↗
50. Interfacial properties measurement for SiC fiber-reinforced titantum alloy composites10.1016/0956-716X(90)90184-I ↗
51. Effects of interface chemistry on the fracture properties of titanium matrix composites10.1016/S1359-835X(97)00129-2 ↗
52. SiC(SCS-6) fiber-reinforced Ti3AlC2 matrix composites: interfacial characterization and mechanical behavior10.1016/j.jeurceramsoc.2014.11.034 ↗
53. Effect of Mo coating on the interface and mechanical properties of SiC fiber reinforced Ti6Al4V composites10.1016/j.msea.2012.04.072 ↗
54. The effect of heat treatment on the strength and toughness of carbon fiber/silicon carbide composites with different pyrolytic carbon interphase thicknesses10.1016/j.carbon.2013.01.076 ↗