journal article·2020-02Open access

Evaluation of the textural properties of ultramicroporous carbons using experimental and theoretical methods

D. Grau-Marin, J. Silvestre-Albero, E.O. Jardim, J. Jagiello, W.R. Betz, L.E. Peña

Carbon· Volume 157

Abstract

Spherical carbon molecular sieves (CMS) have selective adsorptive properties which are suitable for separation and purification of gas mixtures. Precise methods of characterization are needed to understand the performance of CMS in separation processes. To this end, the pore size distribution (PSD) of four carbon molecular sieves were evaluated experimentally using immersion calorimetry and complemented with gas adsorption measurements at cryogenic temperatures for N2, O2 and Ar, and at 273 K for CO2. Theoretical pore size distributions were estimated using two-dimensional non-local Density Functional Theory (2D-NLDFT) models. Calorimetry results showed that B and C samples had a narrow pore size distribution with pores below 0.7 nm. Meanwhile, the pore size distributions calculated from O2 and Ar adsorption isotherms, gave an apex in the 0.5–0.6 nm region for all the carbons together with a growing development of porosity at around 0.8 nm and above for carbons A and D. The agreement observed between experiments and theory confirmed the validity of the theoretical 2D-NLDFT models to anticipate the PSD. Carbon C with pores exclusively below 0.7 nm separated CO2 and CH4 while carbon D with pores in the supermicroporous region separated propane and propylene chromatographically.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Carbon Dioxide Capture Technologies · Membrane Separation and Gas Transport · Zeolite Catalysis and Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Experimental studies of hydrocarbon separation on zeolites, activated carbons and MOFs for applications in natural gas processing10.1039/C6RA25509D ↗
2. Porous graphitic carbon as a stationary phase in HPLC: theory and applications10.1080/10826070802126429 ↗
3. Kinetic separation of methane-carbon dioxide mixture by adsorption on molecular sieve carbon10.1016/0009-2509(89)80014-4 ↗
4. Superior CO2, CH4, and H2 uptakes over ultrahigh-surface-area carbon spheres prepared from sustainable biomass-derived char by CO2 activation10.1016/j.carbon.2016.04.036 ↗
5. Pressure swing adsorption for biogas upgrading. A new process configuration for the separation of biomethane and carbon dioxide10.1016/j.jclepro.2016.10.013 ↗
6. Challenges and opportunities for adsorption-based CO 2 capture from natural gas combined cycle emissions10.1039/C9EE00505F ↗
7. Seven chemical separations to change the world10.1038/532435a ↗
8. Carbon molecular sieves for hydrocarbon separations by adsorption10.1021/ie050376r ↗
9. Adsorption of propane and propylene onto carbon molecular sieve10.1016/S0008-6223(03)00304-X ↗
10. Physical characterization of activated carbons with narrow microporosity by nitrogen (77.4 K), carbon dioxide (273 K) and argon (87.3 K) adsorption in combination with immersion calorimetry10.1016/j.carbon.2011.09.005 ↗
11. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
12. Consistency of carbon nanopore characteristics derived from adsorption of simple gases and 2D-NLDFT models. Advantages of using adsorption isotherms of oxygen (O 2 ) at 77 K10.1016/j.jcis.2019.01.116 ↗
13. The combined use of different approaches in the characterization of microporous carbons10.1016/0008-6223(89)90153-X ↗
14. Rios · 2007 · 3803
15. Characterization of pore structure of carbon molecular sieves using DFT analysis of Ar and H2adsorption data10.1016/j.micromeso.2007.03.035 ↗
16. Dual gas analysis of microporous carbons using 2D-NLDFT heterogeneous surface model and combined adsorption data of N2 and CO210.1016/j.carbon.2015.05.004 ↗
17. 2D-NLDFT adsorption models for carbon slit-shaped pores with surface energetical heterogeneity and geometrical corrugation10.1016/j.carbon.2012.12.011 ↗
18. Characterization of microporous solids by immersion calorimetry10.1016/S0927-7757(01)00620-3 ↗
19. Gas adsorption by nanoporous materials: future applications and experimental challenges10.1557/mrs.2013.105 ↗
20. Characterizing adsorbents for gas separations
21. Assessing surface chemistry and pore structure of active carbons by a combination of physisorption (H2O, Ar, N2, CO2), XPS and TPD-MS10.1007/s10450-011-9360-4 ↗
22. Density functional theory analysis of the influence of pore wall heterogeneity on adsorption in carbons10.1021/la0201927 ↗
23. Modeling of adsorption on nongraphitized carbon surface: GCMC simulation studies and comparison with experimental data10.1021/jp062386r ↗
24. Why does the linear driving force model for adsorption kinetics work?10.1023/A:1008965317983 ↗
25. A new carbon molecular sieve for propylene/propane separations10.1016/j.carbon.2014.12.089 ↗
26. Carbon molecular sieves prepared from polymeric precursors: porous structure and hydrogen adsorption properties10.1021/ie900091n ↗
27. Modification of the surface chemistry of activated carbons10.1016/S0008-6223(98)00333-9 ↗
28. Stable numerical solution of the adsorption integral equation using splines10.1021/la00020a045 ↗
29. Adsorption of nitrogen by porous and non-porous carbons10.1016/0008-6223(87)90040-6 ↗
30. In-situ ion-activated carbon nanospheres with tunable ultramicroporosity for superior CO2 capture10.1016/j.carbon.2018.10.096 ↗
31. Effect of pore size on carbon dioxide sorption by carbide derived carbon10.1039/c1ee01176f ↗
32. Zhou · 2016 · 7955
33. Adsorption of binary mixtures of Propane−Propylene in carbon molecular sieve 4A10.1021/ie049327p ↗
34. Dynamic gas solid chromatographic techniques for characterizing carbon molecular-sieves10.1016/S0021-9673(01)96240-5 ↗