Shear failure in supported two-dimensional nanosheet van der Waals thin films
Source abstract
Abstract
Liquid-phase deposition of exfoliated 2D nanosheets is the basis for emerging technologies that include writable electronic inks, molecular barriers, selective membranes, and protective coatings against fouling or corrosion. These nanosheet thin films have complex internal structures that are discontinuous assemblies of irregularly tiled micron-scale sheets held together by van der Waals (vdW) forces. On stiff substrates, nanosheet vdW films are stable to many common stresses, but can fail by internal delamination under shear stress associated with handling or abrasion. This "re-exfoliation" pathway is an intrinsic feature of stacked vdW films and can limit nanosheet-based technologies. Here we investigate the shear stability of graphene oxide and MoSe2 nanosheet vdW films through lap shear experiments on polymer-nanosheet-polymer laminates. These sandwich laminate structures fail in mixed cohesive and interfacial mode with critical shear forces from 40 - 140 kPa and fracture energies ranging from 0.2 - 6 J/m2. Surprisingly these energies are higher than delamination energies reported for smooth peeling of ordered stacks of continuous 2D sheets, which we propose is due to energy dissipation and chaotic crack motion during nanosheet film disassembly at the crack tip. Experiment results also show that film thickness plays a key role in determining critical shear force (maximum load before failure) and dissipated energy for different nanosheet vdW films. Using a mechanical model with an edge crack in the thin nanosheet film, we propose a shear-to-tensile failure mode transition to explain a maximum in critical shear force for graphene oxide films but not MoSe2 films. This transition reflects a weakening of the substrate confinement effect and increasing rotational deformation near the film edge as the film thickness increases. For graphene oxide, the critical shear force can be increased by electrostatic cross-linking achieved through interlayer incorporation of metal cations. These results have important implications for the stability of functional devices that employ 2D nanosheet coatings.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Graphene research and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Graphene-based environmental barriers10.1021/es301377y ↗
2. Breathable vapor toxicant barriers based on multilayer graphene oxide10.1021/acsnano.7b01106 ↗
3. Sandwich-architectured poly (lactic acid)–graphene composite food packaging films10.1021/acsami.6b02498 ↗
4. Graphene oxide membranes for ionic and molecular sieving10.1126/science.1250247 ↗
5. Flexible graphene-based wearable gas and chemical sensors10.1021/acsami.7b07063 ↗
6. Wearable and highly sensitive graphene strain sensors for human motion monitoring10.1002/adfm.201400379 ↗
7. Mechanical properties of monolayer graphene oxide10.1021/nn101781v ↗
8. Brittle fracture of 2D MoSe210.1002/adma.201604201 ↗
9. Measurement of the cleavage energy of graphite10.1038/s41467-024-52768-7 ↗
10. Quantum Monte Carlo calculation of the binding energy of bilayer graphene10.1103/PhysRevLett.115.115501 ↗
11. Interlayer bonding energy of layered minerals: implication for the relationship with friction coefficient10.1002/2015JB011900 ↗
12. Nanomechanical cleavage of molybdenum disulphide atomic layers10.1038/ncomms4631 ↗
13. Adhesion between immiscible polymers correlated with interfacial entanglements10.1021/ma020789t ↗
14. Adhesion of polymers in paper products from the macroscopic to molecular level—an overview10.1163/016942410X525821 ↗
15. Adhesive fracture of a lap shear joint10.1007/BF02324771 ↗
16. Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints10.1016/j.ijadhadh.2009.02.012 ↗
17. Cracking of short lap joints
18. Effect of adhesive type and thickness on the lap shear strength
19. Stress analysis of adhesive-bonded lap joints10.1243/03093247V093185 ↗
20. Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures10.1163/156856101317035503 ↗
21. Fabrication of highly-aligned, conductive, and strong graphene papers using ultralarge graphene oxide sheets10.1021/nn303904z ↗
22. Deformation and failure mechanisms in graphene oxide paper using in situ nanomechanical tensile testing10.1016/j.carbon.2013.07.019 ↗
23. VI. The phenomena of rupture and flow in solids
24. Revisiting brittle fracture as an energy minimization problem10.1016/S0022-5096(98)00034-9 ↗
25. Advanced mechanical properties of graphene paper10.1063/1.3528213 ↗
26. Out-of-plane shear and out-of plane Young’s modulus of double-layer graphene10.1016/j.cplett.2013.02.018 ↗
27. Mosquito bite prevention through graphene barrier layers10.1073/pnas.1906612116 ↗
28. Tuning the mechanical properties of graphene oxide paper and its associated polymer nanocomposites by controlling cooperative intersheet hydrogen bonding10.1021/nn202928w ↗
29. Effect of surface roughness on adhesion of graphene membranes10.1088/0022-3727/44/45/452001 ↗
30. Interfacial sliding and buckling of monolayer graphene on a stretchable substrate10.1002/adfm.201301999 ↗
31. Realizing ultrahigh modulus and high strength of macroscopic graphene oxide papers through crosslinking of mussel-inspired polymers10.1002/adma.201300118 ↗
32. Graphene oxide sheets chemically cross-linked by polyallylamine10.1021/jp907613s ↗
33. Graphene oxide papers modified by divalent ions—enhancing mechanical properties via chemical cross-linking10.1021/nn700349a ↗
34. The effect of interlayer adhesion on the mechanical behaviors of macroscopic graphene oxide papers10.1021/nn103331x ↗
35. Graphene inks as versatile templates for printing tiled metal oxide crystalline films10.1002/adma.201705080 ↗
36. Trivalent metal cation cross-linked graphene oxide membranes for NOM removal in water treatment10.1016/j.memsci.2017.07.061 ↗
37. Strength and toughness of adhesion of soft materials measured in lap shear10.1016/j.jmps.2020.103988 ↗
38. Adhesion strength behaviour of plasma pre-treated and laminated polypropylene nonwoven fabrics using acrylic and polyurethane-based adhesives10.1177/1528083712458303 ↗
39. Antioxidant chemistry of graphene-based materials and its role in oxidation protection technology10.1039/C4NR03275F ↗
40. Chemical dissolution pathways of MoS2 nanosheets in biological and environmental media10.1021/acs.est.6b01881 ↗
41. The virtual crack extension method for nonlinear material behavior10.1016/0045-7825(77)90023-8 ↗
42. Energy release rate along a three-dimensional crack front in a thermally stressed body10.1007/BF00034019 ↗
43. Stress analysis around crack tips in finite strain problems using the extended finite element method10.1002/nme.1291 ↗
44. Extended finite element method in computational fracture mechanics: a retrospective examination10.1007/s10704-015-0064-8 ↗