journal article·2022-01

Expandable nitrogen-doped carbon-based anodes fabricated from self-sacrificial metal-organic frameworks for ultralong-life lithium storage

Can Liao, Yanbei Hou, Longfei Han, Yulu Zhu, Huijuan Wang, Na Wu, Yuan Hu, Yongchun Kan, Lei Song

Carbon· Volume 186
Publisher page

Abstract

Abstract Eco-friendly carbon-based anodes are highly attractive for use as anode materials in lithium-ion batteries because of their accessibility, high conductivity, and satisfactory storage capacity. However, to date, the carbon anodes reported in literature exhibit low capacity, poor cycling stability, and cannot meet the current increasing demands for materials that possess high energy density. Herein, highly nitrogen-doped expandable carbon-based anodes are developed using the zeolitic imidazolate frameworks (ZIFs) ZIF-67 and ZIF-8 as self-sacrificial templates. Compared with pure carbon anodes, such as graphene oxide (GO) and carbon nanotubes (CNTs), the expandable N-doped with small size CNTs decorated GO (NC-GO) and CNTs (NC-CNTs) anodes developed in this work exhibit gradually increasing reversible specific capacities, as well as high capacities of 790 and 800 mA h g−1, respectively, which can be sustained even after 500 cycles at 100 mA g−1. Moreover, the anodes show ultralong cycling lives with extremely low capacity loss rates in each cycle of 0.0042% for NC-GO over 7000 cycles and 0.0035% for NC-CNTs over 10,000 cycles, which are superior to those in the current literature. This work details a new vision and direction for the development of high-capacity ultralong cycling life carbon-based anodes for use in next generation rechargeable energy storage systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Ecological responses to recent climate change10.1038/416389a ↗
2. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
3. The scientific consensus on climate change10.1126/science.1103618 ↗
4. Toward solar fuels: photocatalytic conversion of carbon dioxide to hydrocarbons10.1021/nn9015423 ↗
5. Life cycle energy and greenhouse gas emissions of nuclear energy: a review10.1016/j.enconman.2008.01.033 ↗
6. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
7. Green energy storage materials: nanostructured TiO2 and Sn-based anodes for lithium-ion batteries10.1039/b823474d ↗
8. Lithium batteries and cathode materials10.1021/cr020731c ↗
9. Magnetron sputtering deposition of silicon nitride on polyimide separator for high-temperature lithium-ion batteries10.1016/j.jechem.2020.07.046 ↗
10. Mechanisms for lithium insertion in carbonaceous materials10.1126/science.270.5236.590 ↗
11. Lithium insertion in ball-milled graphite10.1016/S0378-7753(98)00114-1 ↗
12. Fabrication of a necklace-like fiber separator by the electrospinning technique for high electrochemical performance and safe lithium metal batteries
13. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
14. Carbon nanotubes for photoconversion and electrical energy storage10.1021/cr9003314 ↗
15. Nitrogen-doped carbon nanoboxes as high rate capability and long-life anode materials for high-performance Li-ion capacitors10.1016/j.cej.2020.125314 ↗
16. A flame retardant sandwiched separator coated with ammonium polyphosphate wrapped by SiO2 on commercial polyolefin for high performance safety lithium metal batteries10.1016/j.apmt.2020.100793 ↗
17. A comparative study of electrochemical properties of two kinds of carbon nanotubes as anode materials for lithium ion batteries10.1016/j.electacta.2007.09.040 ↗
18. Energetics of lithium ion adsorption on defective carbon nanotubes10.1103/PhysRevB.71.245418 ↗
19. Tin-filled carbon nanotubes as insertion anode materials for lithium-ion batteries10.1016/j.elecom.2004.03.009 ↗
20. High-energy, rechargeable Li-ion battery based on carbon nanotube technology10.1016/j.jpowsour.2004.06.014 ↗
21. Metallic and semiconducting single-walled carbon nanotubes as the anode material of Li ion secondary battery10.1016/j.matlet.2008.01.088 ↗
22. Ab initio investigations of lithium diffusion in carbon nanotube systems10.1103/PhysRevLett.88.075506 ↗
23. Enhanced saturation lithium composition in ball-milled single-walled carbon nanotubes10.1016/S0009-2614(00)00851-4 ↗
24. Lithium insertion into purified and etched multi-walled carbon nanotubes synthesized on supported catalysts by thermal CVD10.1016/j.carbon.2004.05.039 ↗
25. Preparation of short carbon nanotubes and application as an electrode material in Li-ion batteries10.1002/adfm.200700319 ↗
26. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
27. Li-alloy based anode materials for Li secondary batteries10.1039/b919877f ↗
28. Lithium insertion/extraction mechanism in alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.08.114 ↗
29. ZIF-8/ZIF-67-derived 3D amorphous carbon-encapsulated CoS/NCNTs supported on CoS-coated carbon nanofibers as an advanced potassium-ion battery anode10.1039/C8TA12457D ↗
30. A non-GIC mechanism of lithium storage in chemical etched MWNTs10.1016/j.jelechem.2003.09.004 ↗
31. Effects of ball-milling on lithium insertion into multi-walled carbon nanotubes synthesized by thermal chemical vapour deposition10.1016/j.jpowsour.2005.08.024 ↗
32. A review of application of carbon nanotubes for lithium ion battery anode material10.1016/j.jpowsour.2012.02.013 ↗
33. Evaluation and characterization of reduced graphene oxide nanosheets as anode materials for lithium-ion batteries10.1016/S1452-3981(23)14760-2 ↗
34. Nanostructured reduced graphene oxide/Fe2O3 composite as a high-performance anode material for lithium ion batteries10.1021/nn200493r ↗
35. Hollow Zn/Co ZIF particles derived from core–shell ZIF-67@ ZIF-8 as selective catalyst for the semi-hydrogenation of acetylene10.1002/anie.201504242 ↗
36. Core–shell ZIF-8@ ZIF-67-derived CoP nanoparticle-embedded N-doped carbon nanotube hollow polyhedron for efficient overall water splitting10.1021/jacs.7b12420 ↗
37. Zn-doped Ni-MOF material with a high supercapacitive performance10.1039/C4TA04346D ↗
38. Metal–organic frameworks: a new promising class of materials for a high performance supercapacitor electrode10.1039/C4TA04140B ↗
39. A new promising Ni-MOF superstructure for high-performance supercapacitors10.1039/C9CC09302H ↗
40. General synthesis of sulfonate-based metal–organic framework derived composite of MxSy@ N/S-doped carbon for high-performance lithium/sodium ion batteries10.1002/chem.202004241 ↗
41. interfaces, Construction of bimetallic ZIF-derived Co–Ni LDHs on the surfaces of GO or CNTs with a recyclable method: toward reduced toxicity of gaseous thermal decomposition products of unsaturated polyester Resin10.1021/acsami.8b04340 ↗