journal article·2020-10

Effect of sorted, homogeneous electronic grade single-walled carbon nanotube on the electromagnetic shielding effectiveness

Ilhwan Yu, Jaehyoung Ko, Tea-Wook Kim, Dong Su Lee, Nam Dong Kim, Sukang Bae, Seoung-Ki Lee, Jaewon Choi, Sang Seok Lee, Yongho Joo

Carbon· Volume 167
Publisher page

Abstract

Abstract Enhancing the electromagnetic interference (EMI) shielding effectiveness (SH EF) with lightweight materials is a significant challenge. Herein, we introduce the fabrication of a heterogeneous metallic and semiconducting single-walled carbon nanotube (SWCNT) from the current synthetic method into films to optimize EMI SH EF. Because EMI SH EF can be affected by absorption and reflectance attenuation, optimizing the ratio of the metallic or semiconducting nature of SWCNT as a homogeneous electronic grade is critical. We optimized the SWCNT thin film as a homogeneous electronic grade and compared the EMI SH EF performance between them, with mechanistic insights. Specifically, we tuned the ratio of the metallic (m-) and semiconducting (s-) SWCNT in thin film and determined the EMI SH EF. Electronically pure m-SWCNT thin films showed the higher EMI SH EF than s-SWCNT thin film with the comparable tube length. Furthermore, a 1.2 μm thick film of sorted SWCNT exhibited a maximum EMI SH EF of approximately 35 dB with 3 mg of the lightweight film, and the highest normalized specific EMI SH EF (ESE/t), which is the EMI SH EF normalized by the density and thickness of the film, obtained herein was 153,333 dB cm2 g−1 in the frequency range of 12–19 GHz. Our findings demonstrate a substantial material design paradigm for the creation of next-generation material for high-performance EMI SH EF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites10.1021/nl0602589 ↗
2. Processing-mediated different states of dispersion of multiwalled carbon nanotubes in PDMS nanocomposites influence EMI shielding performance10.1021/acsomega.8b02920 ↗
3. Highly aligned graphene/polymer nanocomposites with excellent dielectric properties for high-performance electromagnetic interference shielding10.1002/adma.201305293 ↗
4. Broadband and tunable high-performance microwave absorption of an ultralight and highly compressible graphene foam10.1002/adma.201405788 ↗
5. Anticorrosive, ultralight, and flexible carbon-wrapped metallic nanowire hybrid sponges for highly efficient electromagnetic interference shielding10.1002/smll.201800534 ↗
6. Room-temperature production of silver-nanofiber film for large-area, transparent and flexible surface electromagnetic interference shielding10.1038/s41528-019-0050-8 ↗
7. Electromagnetic interference shielding effectiveness of carbon materials10.1016/S0008-6223(00)00184-6 ↗
8. A stretchable carbon nanotube strain sensor for human-motion detection10.1038/nnano.2011.36 ↗
9. Highly stretchable carbon nanotube transistors with ion gel gate dielectrics10.1021/nl403941a ↗
10. Toward flexible and wearable human-interactive health-monitoring devices10.1002/adhm.201400546 ↗
11. Development of a carbon nanotube-based touchscreen capable of multi-touch and multi-force sensing10.3390/s151128732 ↗
12. Preparation and characterization of highly conductive transparent films with single-walled carbon nanotubes for flexible display applications10.1016/j.carbon.2009.04.045 ↗
13. The influence of single-walled carbon nanotube structure on the electromagnetic interference shielding efficiency of its epoxy composites10.1016/j.carbon.2007.04.016 ↗
14. Carbon nanotube thin films: fabrication, properties, and applications10.1021/cr9002962 ↗
15. Transparent conductive single-walled carbon nanotube networks with precisely tunable ratios of semiconducting and metallic nanotubes10.1021/nn800200d ↗
16. Isolation of pristine electronics grade semiconducting carbon nanotubes by switching the rigidity of the wrapping polymer backbone on demand10.1021/acsnano.5b03835 ↗
17. High performance transistors via aligned polyfluorene-sorted carbon nanotubes10.1063/1.4866577 ↗
18. Polyfluorene-sorted, carbon nanotube array field-effect transistors with increased current density and high on/off ratio10.1021/nn5048734 ↗
19. Transparent, conductive carbon nanotube films10.1126/science.1101243 ↗
20. Sorting carbon nanotubes by electronic structure using density differentiation10.1038/nnano.2006.52 ↗
21. Estimation of the (n,m) concentration distribution of single-walled carbon nanotubes from photoabsorption spectra10.1021/ac0610917 ↗
22. Etching of surfactant from solution-processed, type-separated carbon nanotubes and impact on device behavior10.1021/nn406065t ↗
23. Synthesis of fluorescent chitosan and its application in noncovalent functionalization of carbon nanotubes10.1021/bm800964m ↗
24. Characterizing carbon nanotube samples with resonance Raman scattering10.1088/1367-2630/5/1/139 ↗
25. Observations of the D-band feature in the Raman spectra of carbon nanotubes10.1103/PhysRevB.64.073403 ↗
26. Polymer-free electronic-grade Aligned semiconducting carbon nanotube Array10.1021/acsami.7b06850 ↗
27. Quasi-ballistic carbon nanotube array transistors with current density exceeding Si and GaAs10.1126/sciadv.1601240 ↗
28. Enhancing extraction of photogenerated excitons from semiconducting carbon nanotube films as photocurrent10.1016/j.chemphys.2012.08.001 ↗
29. Dose-controlled, floating evaporative self-assembly and alignment of semiconducting carbon nanotubes from organic solvents10.1021/la500162x ↗
30. Optimizing sonication parameters for dispersion of single-walled carbon nanotubes10.1016/j.chemphys.2012.08.020 ↗
31. Crossed nanotube junctions10.1126/science.288.5465.494 ↗
32. Lightweight and flexible graphene foam composites for high-performance electromagnetic interference shielding10.1002/adma.201204196 ↗
33. Tough graphene− polymer microcellular foams for electromagnetic interference shielding10.1021/am200021v ↗
34. Hydrophobic, flexible, and lightweight MXene foams for high-performance electromagnetic-interference shielding10.1002/adma.201702367 ↗
35. Electromagnetic interference shielding with 2D transition metal carbides (MXenes)10.1126/science.aag2421 ↗
36. Improved electromagnetic interference shielding effectiveness of light weight carbon foam by ferrocene accumulation10.1039/c3ra00121k ↗
37. Synthesis and microwave absorption enhancement of graphene@Fe3O4@SiO2@NiO nanosheet hierarchical structures10.1039/C3NR05313J ↗
38. Microcellular graphene foam for improved broadband electromagnetic interference shielding10.1016/j.carbon.2016.02.040 ↗
39. Structured reduced graphene oxide/polymer composites for ultra-efficient electromagnetic interference shielding10.1002/adfm.201403809 ↗
40. Highly efficient electromagnetic interference shielding using graphite nanoplatelet/poly (3, 4-ethylenedioxythiophene)–poly (styrenesulfonate) composites with enhanced thermal conductivity10.1039/C4RA15674A ↗
41. Facile preparation of lightweight microcellular polyetherimide/graphene composite foams for electromagnetic interference shielding10.1021/am303289m ↗
42. Efficient electromagnetic interference shielding of lightweight graphene/polystyrene composite10.1039/c2jm32692b ↗
43. Polyimide/graphene composite foam sheets with ultrahigh thermostability for electromagnetic interference shielding10.1039/C4RA16421K ↗
44. Magnetic and conductive graphene papers toward thin layers of effective electromagnetic shielding10.1039/C4TA05939E ↗
45. Lightweight, multifunctional polyetherimide/graphene@ Fe3O4 composite foams for shielding of electromagnetic pollution10.1021/am4036527 ↗
46. Mechanical and electrical properties of multiwall carbon nanotube/polycarbonate composites for electrostatic discharge and electromagnetic interference shielding applications10.1039/c3ra47387b ↗
47. EMI shielding effectiveness of carbon based nanostructured polymeric materials: a comparative study10.1016/j.carbon.2013.04.008 ↗
48. Comparative study of electromagnetic interference shielding properties of injection molded versus compression molded multi-walled carbon nanotube/polystyrene composites10.1016/j.carbon.2012.06.053 ↗
49. Lightweight and anisotropic porous MWCNT/WPU composites for ultrahigh performance electromagnetic interference shielding10.1002/adfm.201503579 ↗
50. Novel carbon nanotube− polystyrene foam composites for electromagnetic interference shielding10.1021/nl051375r ↗
51. Ultra-light carbon nanotube sponge as an efficient electromagnetic shielding material in the GHz range10.1002/pssr.201409151 ↗
52. Conducting carbon black filled EPDM vulcanizates: assessment of dependence of physical and mechanical properties and conducting character on variation of filler loading10.1016/S0014-3057(99)00157-3 ↗
53. Phthalonitrile-based carbon foam with high specific mechanical strength and superior electromagnetic interference shielding performance10.1021/acsami.5b12072 ↗
54. Electromagnetic shielding performance of carbon foams10.1016/j.carbon.2011.12.053 ↗
55. Nickel filament polymer-matrix composites with low surface impedance and high electromagnetic interference shielding effectiveness10.1007/s11664-997-0276-4 ↗
56. Fabrication and electromagnetic interference shielding performance of open-cell foam of a Cu–Ni alloy integrated with CNTs10.1016/j.apsusc.2014.05.067 ↗
57. A comparative study of structure and electromagnetic interference shielding performance for silver nanostructure hybrid polyimide foams10.1039/C5RA09507G ↗
58. Lightweight polypropylene/stainless-steel fiber composite foams with low percolation for efficient electromagnetic interference shielding10.1021/am500445g ↗